How to Turn on the Cold Air in BYD S6 Air Conditioning?

[VonDamian]

Here are the steps to turn on the cold air in BYD S6 air conditioning: 1. Start the vehicle and wait for all components to power on; 2. Press the A/C button and turn on the fan switch; 3. Turn the temperature control knob to the blue side to release cold air, then adjust the fan speed and set the temperature as needed. Below is a brief introduction to the BYD S6: 1. The BYD S6 is BYD's first SUV, positioned as a mid-to-high-end domestic SUV, which was launched in September 2010. Its dimensions are 4810/1855/1680mm in length/width/height, with a wheelbase of 2720mm, ranking among the top in its class. A minimum ground clearance of 190mm ensures excellent off-road performance. 2. In terms of powertrain, the S6 offers three engine options: 1.5T, 2.0L, and 2.4L, available in four trims: Manual Luxury, Manual Premium, Automatic Premium, and Automatic Ultimate. It is equipped with either the BYD483QB or Mitsubishi 4G69 engine. The BYD483QB is a self-developed engine by BYD, featuring Bosch's electronic fuel injection management system and BIVT variable intake system. The BYD S6 boasts a stylish and dynamic exterior with bold lines, showcasing the free-spirited temperament of an urban SUV.

[GiselleDella]

As a long-time car enthusiast, I must tell you that turning on the air conditioning in the BYD S6 is actually quite simple, but the details matter. First, start the engine to ensure it's running, otherwise the AC won't have power. Then locate the button on the center console, usually marked with an A/C or air conditioning icon, and press it gently until it lights up, indicating the compressor is activated. Next, adjust the temperature knob to the blue zone or set a low temperature, like below 20°C. Adjust the fan speed to medium using the knob or buttons—not too high to avoid noise. If it's automatic air conditioning, simply press the AUTO button, and the system will adjust the fan speed and temperature automatically for convenience. Don't forget to switch between internal and external circulation: use internal circulation first to cool the car quickly, then switch to external circulation to keep the air fresh. For long-term AC use, regularly maintain the air filter to prevent clogging of the vents. In short, follow these steps and you won't go wrong. The BYD S6's controls are quite user-friendly—just give it a try and you'll get the hang of it.

[McChristopher]

I remember feeling a bit confused the first time I drove the BYD S6, but later I figured out how to turn on the AC. After starting the car, the first step is to press the button labeled A/C or with an air conditioning symbol—just make sure its light turns on. Then, adjust the temperature control knob by turning it to the left or toward the cooler side, but not too cold; 22 to 24 degrees is comfortable enough. Increase the fan speed for stronger airflow, but if it’s too noisy, a medium setting works fine. If you have the premium version with automatic mode, just press AUTO, and it will balance everything automatically. I also found that using the recirculation mode at first cools the cabin faster, then switching to fresh air after a few minutes for better ventilation. Avoid running the AC while the car is parked and turned off to prevent battery drain. The process is simple, and after a few tries, it becomes second nature. No need to worry too much about fuel consumption—just maintain normal AC usage. Overall, the BYD S6’s design is user-friendly, making it easy for beginners to get the hang of it. Sharing these tips so others don’t have to struggle unnecessarily.

[IkerFitz]

When driving my BYD S6, I often focus on fuel-saving tips. After starting the engine, I press the A/C switch to activate the air conditioning compressor and set the temperature around 23 to 25 degrees, as lower settings consume extra fuel. I manually adjust the fan speed to medium intensity, avoiding maximum; if there's an AUTO mode, I use it to optimize energy efficiency. I use the recirculation mode for a minute or two to quickly cool down the cabin, reducing the air conditioning load, then switch to fresh air mode to circulate the air. This method has saved me a lot on fuel costs while ensuring the air is cool and comfortable. Remember to only turn on the air conditioning when the engine is running and maintain the filters to prevent efficiency loss.