How to Turn on the Cold Air in Baojun 510?

1 Answers
AubreyDella
07/30/25 4:29am
To turn on the cold air in Baojun 510, press the air conditioning switch at the bottom left corner of the air conditioning panel, then press the AC button to activate the cold air. Some car owners do not pay attention to adjusting the direction of the air conditioning airflow when using it, which is not conducive to maximizing the air conditioning's effectiveness. According to the principle that cold air sinks and hot air rises, the correct approach is to direct the air vents upward when using the cold air and downward when using the warm air. The Baojun 510 is a compact SUV launched by SAIC-GM-Wuling targeting young consumers. Its body dimensions are 4220mm in length, 1740mm in width, and 1625mm in height, with a wheelbase of 2550mm. In terms of exterior design, the Baojun 510 features a distinctive split headlight design, with LED daytime running lights connected to the large front grille, while the main headlights are positioned on either side of the grille. The rear of the vehicle is equipped with conventional halogen tail lights.
Was this review help?
3
2
Share
More Forum Discussions

What is the weight of gasoline?

Different grades of gasoline have slightly varying densities. For example, 95-octane gasoline has a density of 0.725g/ml, which is 0.725kg/L. Below is relevant information about gasoline grades: Densities of different gasoline grades: The densities vary among different grades. The most commonly encountered are 92-octane and 95-octane gasoline. 92-octane gasoline has a density of approximately 0.72g/ml, 95-octane gasoline about 0.725g/ml, and 98-octane gasoline about 0.737g/ml. Grades: The reason gasoline has different grades is primarily due to their varying anti-knock properties, not because higher grades contain fewer impurities. Higher-grade gasoline offers better anti-knock performance, meaning engines are less prone to pre-ignition during operation. Additionally, the compression ratio of the engine determines the appropriate gasoline grade.
16
3
Share

What Tools Are Used for Car Dent Repair?

Car dent repair requires a variety of tools, which are categorized into three main types: long tools, hand tools, and specialized lights. Below is an introduction to car dent repair technology: Definition: Paintless dent repair (also known as vehicle dent repair) refers to a technique that restores the dented or deformed parts of a vehicle body while preserving the original paint. Advantages: Car dent repair preserves the original paint, reduces repair time and costs, is not restricted by location, and does not alter the vehicle's key safety parameters. Applicability: Car dent repair technology is not only suitable for small-area dent repairs but can also be used to repair certain characteristic large-area dent damages.
14
1
Share

Is It Necessary to Repair Car Rims?

Repairing rims is indeed necessary as their condition directly impacts driving safety. Below is a detailed introduction about car rims: Overview: The rim (Car-Rim) is the central part of the wheel where the axle is installed, also known as the "wheel rim" or "steel rim." Rims are prone to accumulating dirt, and if not cleaned for a long time, they may corrode or deform, posing safety hazards. Classification: Rims can be categorized into steel rims and alloy rims based on material, each with its own advantages and disadvantages. The main advantage of steel rims is their simple manufacturing process (usually cast, whereas aluminum alloy rims are typically produced using low-pressure casting), relatively lower cost, and stronger resistance to metal fatigue.
16
0
Share

Where is the three-way catalytic converter installed in a car?

The three-way catalytic converter is generally installed in the first bulge section of the exhaust manifold under the car chassis, resembling a long kettle-shaped device. The three-way catalytic converter is the most important external purification device installed in a vehicle's exhaust system. It converts harmful gases such as CO, HC, and NOx emitted from automobile exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Components of the three-way catalytic converter: The three-way catalytic converter typically consists of four parts: the shell, vibration damping layer, substrate, and catalyst coating. The shell is made of stainless steel to prevent oxide scale from falling off, which could clog the substrate. The vibration damping layer is composed of gaskets or wire mesh pads, serving to seal, insulate, and secure the substrate. To protect the substrate from damage caused by vibration, thermal deformation, and other factors, the gasket is made of expanded mica and aluminum silicate fibers, finally bonded with adhesive. The substrate is made of honeycomb-shaped ceramic material, though many also use metal (including stainless steel) materials. The catalyst consists of precious metals such as platinum, rhodium, and palladium, sprayed onto the substrate to form the purifying agent.
6
0
Share

What are the reasons and faults when an electric tricycle has power but won't move?

Brake power cutoff failure, throttle handle Hall circuit failure, etc. The following is a related introduction about tricycles: Introduction: A tricycle is a means of transportation transformed from a bicycle, which can carry people or transport goods. It became very popular after the 1930s and gradually replaced the status of rickshaws. Tricycles are a combination of rickshaws and bicycles. Tricycles can be divided into manual tricycles, electric tricycles, children's tricycles, and battery-powered tricycles. Classification: Manual tricycles are three-wheeled bicycles equipped with a carriage or flatbed for carrying people or goods. Electric tricycles are characterized by their beautiful appearance, energy-saving and labor-saving features, good climbing performance, flexible steering, economic practicality, reliable quality, and environmental friendliness. Motorized tricycles refer to three-wheeled vehicles driven or towed by a power device, excluding those designed with maximum speed, unladen mass, and dimensions that comply with national standards for disabled motorized wheelchairs.
17
3
Share

Can You Shift from N to P Without Pressing the Brake?

From a mechanical and physical perspective, it is possible to shift directly from N to P without pressing the brake. Below is relevant information about gear shifting: Concept: Gear shifting refers to the transmission, which is used to change the torque and speed of the engine crankshaft to meet the varying requirements of driving wheel traction and speed under different driving conditions such as starting, accelerating, driving, and overcoming various road obstacles. Function: It allows the car to drive at a very low and stable speed, which is difficult to achieve solely by the minimum stable speed of the internal combustion engine; the reverse gear of the transmission enables the car to move backward; the neutral gear allows the engine to be separated from the drivetrain for extended periods during engine startup, parking, and coasting.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.