How to Turn on the Bora's Low Beam Headlights?

1 Answers
MacTessa
07/29/25 6:00pm
To turn on the Bora's low beam headlights: The light control lever is located on the left side of the steering wheel. Simply rotate the lever to the low beam headlight icon to activate them. Taking the 2021 Bora Comfort Smart Edition as an example, it is a compact car under FAW-Volkswagen, with body dimensions of 4663mm in length, 1815mm in width, and 1462mm in height, and a wheelbase of 2688mm. In terms of power, the Bora is equipped with a 1.2-liter turbocharged engine, delivering a maximum power of 85kw and a maximum torque of 200nm. It features an aluminum alloy cylinder head and block, direct fuel injection, and is paired with a 7-speed dual-clutch transmission (DCT).
Was this review help?
17
2
Share
More Forum Discussions

Where is the fuse located in the Lavida?

The fuse in the Lavida is located inside the instrument panel cover on the left side of the driver's seat. Open the driver's side door, then use a flat-head object to insert into the cover groove and carefully pry open the cover to access the fuse box. Before opening the fuse box, ensure the ignition switch and related electrical devices are turned off. After opening, prevent dirt and moisture from entering the exposed fuse box, as these can cause damage to electrical components. The Lavida is Shanghai Volkswagen's first independently developed A-segment car. It retains the excellent quality of German design while incorporating aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements. The traditional Volkswagen grille and U-shaped front face design are also carried forward and inherited in the Lavida.
8
3
Share

What Causes Parking Brake Failure Preventing Ignition?

Parking brake failure preventing engine start is typically caused by a malfunctioning brake light switch, which prevents the ECU from receiving the proper ignition signal. Replacing the brake light switch can resolve this issue. This problem commonly occurs in automatic transmission models, as the brake light switch also serves the function of providing power-on signal feedback for engine start. The parking brake, commonly known as the handbrake, functions to provide resistance when parking, preventing the vehicle from rolling. The correct usage method of the parking brake is as follows: 1. To engage the parking brake, firmly depress the brake pedal and fully pull up the parking brake lever. To release the parking brake, depress the brake pedal, slightly lift the parking brake lever, press the button on the handle with your thumb, then lower the lever to its original position. 2. When parking on an incline, if you shift into P position before applying the parking brake, the vehicle's weight may make it difficult to shift out of P when preparing to drive. 3. When preparing to drive, always shift the gear lever out of P position before releasing the parking brake.
15
2
Share

How to Check if the Car Radiator Coolant is Low

Method to check the car radiator coolant level: Inspect the positions of the MIN and MAX markings on the car radiator. The coolant level should be maintained between the MAX and MIN marks for optimal operation, indicating neither too much nor too little. If the level is below MIN, it indicates insufficient coolant, and it needs to be replenished. When adding coolant, it is recommended to use specialized coolant. In emergency situations, distilled water can be used temporarily. However, before winter arrives, any coolant mixed with distilled water must be completely replaced. Tap water or other water sources should be avoided as the minerals and impurities they contain can form scale inside the cooling system under prolonged high temperatures and may also cause rust in the radiator and pipes, obstructing coolant flow. Therefore, these should only be used as a last resort.
16
4
Share

Should the Vehicle Stability System Be Kept On Normally?

It is recommended to keep the Vehicle Stability System (VSS) normally activated. The Electronic Stability Program (ESP) is a general term for systems or programs designed to enhance vehicle handling performance while effectively preventing loss of control when the vehicle reaches its dynamic limits. The electronic stability program can improve vehicle safety and handling. The ESP system consists of a control unit and sensors such as steering sensors, wheel sensors, skid sensors, and lateral acceleration sensors. The vehicle stability system can prevent dangers when the car is turning, but it is advised not to activate the stability system under the following circumstances: 1. If pursuing vehicle handling sensations, it is not recommended to activate it, as it becomes difficult to perform maneuvers like drifting or oversteering when the system is on; 2. During vehicle inspection on the testing line, the stability system should be turned off. During the test, most front-wheel-drive vehicles have only two wheels moving, and the system might interpret this as wheel slip and intervene, which could affect the inspection results.
16
3
Share

What is the normal value of car water temperature?

Car water temperature gauge at 90 degrees is the normal value. After the vehicle starts, the antifreeze temperature rises rapidly. When the pointer reaches the central position, the heat exchange balance is achieved and the antifreeze temperature no longer rises. Generally, it is optimal to start driving when the temperature reaches the middle position. The engine water temperature gauge uses a physical or virtual dial pointer display. A few vehicles do not have a dashboard and only display a warning indicator when the temperature is too high. Whether it is a physical or virtual water temperature gauge, the pointer orientation is generally similar, usually using a dial ranging from 60 to 120 degrees. Generally, cooling system failures mainly include fluid leakage, insufficient coolant, radiator fan failure, and circulation pump failure.
4
0
Share

What does 'off' mean in a car?

There are many buttons with 'off' in a car. If there is a circle with 'off' below it, then this button is the switch for turning off the car's auto start-stop function. If a button has a small car with two curves behind it and 'off' written below the curves, then this button is the switch for turning off the ESP (Electronic Stability Program) electronic body stability system. After pressing the ESP off switch, an ESP off icon will appear on the dashboard to remind the driver that ESP is now turned off. For all vehicles equipped with ESP, the system is turned on by default after starting the car. The ESP off switch is rarely used during daily driving and is only needed in specific situations, such as when the vehicle is stuck in mud or sand during off-road driving.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.