How to Turn on the Automatic Wipers of the Haval H9?

[MacCarlos]

There are several buttons on the wiper control switch, including an adjustment knob and automatic wiper function. When the button is in the AUTO position, the wiper will automatically adjust the wiping frequency based on the intensity of the rain. Move the wiper control combination switch to the MIST position, and it will automatically return to its original position when released. Pull the wiper control combination switch upward to use the front windshield washer fluid to clean the front windshield.

[AmeliaLee]

The automatic wipers on the Haval H9 are especially suitable for people like me who frequently drive long distances. You don't need to worry about operating them when it suddenly rains. Just locate the control lever on the right side of the steering wheel, where the 'AUTO' letter is marked at the top, and flip it up to activate the automatic mode. At this point, the rain sensor above the windshield will start working—when the rain is heavy, the wipers will move faster, and when the rain is light, they will slow down. Remember to regularly clean the sensor area to prevent dust from affecting its sensitivity. Before using it in winter, clear any snow on the windshield to avoid damaging the motor when starting. Once you've used this feature, you won't want to go without it, especially when driving at night in heavy rain with poor visibility.

[LaAndres]

I've driven quite a few cars with automatic wipers, and the Haval H9's system is particularly user-friendly. The method is simple: there's a rotary knob marked with 'AUTO' at the top of the right-hand stalk on the steering wheel—just turn it to the corresponding position. Once activated, the system uses a sensor at the base of the interior rearview mirror to detect rainfall intensity and automatically adjusts the wiper speed. I prefer setting the sensitivity one notch higher, so even light rain gets wiped away promptly. Before the rainy season, it's best to check the condition of the wiper blades—worn-out blades can leave streaks and interfere with the sensor's accuracy. Last time I washed the car, I made sure to clean the sensor area, and now it responds much faster during sun showers.

[Ralph]

Female drivers often fear getting flustered on the road, but the Haval H9's automatic wipers are a lifesaver! Just locate the stalk on the right side of the steering wheel, turn the knob marked AUTO at the top, and the green light will indicate it's activated. During rain, the wipers automatically adjust their speed. Remember to avoid the rain sensor area on the windshield when applying tint. Before using them in snowy conditions, clear off any snow buildup, and it's best to replace the wiper blades annually. Last time I encountered a heavy downpour on the highway, this feature was crucial in maintaining clear visibility.

[MacAlessandra]

Activating the automatic wipers on the Haval H9 is a simple three-step process: After starting the vehicle, locate the control lever on the right side of the steering wheel, then rotate the ring-shaped switch at the top to the AUTO position. The rain sensor monitors windshield moisture levels via infrared light, and I've found it performs even better on models with steeply angled windshields. Avoid scratching the sensor area with hard objects during daily use, and in rainy seasons, it's recommended to set the sensitivity knob to the highest level. This feature proves particularly useful in mountainous regions – just two days ago while driving through Wuyi Mountain during a sudden downpour, its automatic adjustment speed outperformed my manual operation in precision.