How to Turn On the Audio When It's Off in the Mazda3 Axela?

How to Check the Remaining Fuel Gauge Bars on the Roewe i5?

Method to check the remaining fuel gauge bars on the Roewe i5: The fuel gauge of the Roewe i5 is integrated into the car's tachometer, located directly at the bottom of the tachometer. 'F' indicates a full tank, while 'E' signifies an empty tank. More details are as follows: 1. The Roewe i5 is developed and produced by SAIC Motor, positioned as a compact car with a front-engine, front-wheel-drive layout. In terms of body dimensions, the Roewe i5 measures 4601mm in length, 1818mm in width, and 1489mm in height, with a wheelbase of 2680mm. 2. In terms of exterior design, the Roewe i5 Linghao version features the brand's rhythmic floating wing grille design, paired with rectangular headlight clusters. Additionally, it comes with a trapezoidal air intake below and adopts a dual-waistline design on the side profile. The rear end incorporates a ducktail spoiler design, and all models come with a limited free upgrade to LED headlights.

7

3

Share

Which country's brand is FAW-Volkswagen?

FAW-Volkswagen was established on February 6, 1991, as a large passenger vehicle production joint venture between China FAW Group Corporation, Volkswagen AG, Audi AG, and Volkswagen (China) Investment Co., Ltd. Its main models under the Volkswagen brand include Jetta, Bora, CC, Golf, Sagitar, Magotan, C-Trek, and Golf Sportsvan; under the Audi brand, there are Audi A6L, Audi Q5, Audi A4L, Audi Q3, Audi A3 Limousine, and Audi A3 Sportback. Key milestones in FAW-Volkswagen's development are as follows: February 6, 1991: FAW-Volkswagen Automotive Co., Ltd. was founded. In December of the same year, the first Jetta A2 sedan was assembled and rolled off the production line at FAW's car plant. February 17, 1993: The 10,000th Jetta sedan rolled off the production line at FAW-Volkswagen. December 18, 1995: Audi sedans were officially integrated into FAW-Volkswagen's production, marking the official start of "dual-brand" operations. July 1996: Car Plant I was completed and began production. December 2004: Car Plant II was completed and began production. 2008: The independently developed New Bora was launched by FAW-Volkswagen. January 2013: FAW-Volkswagen's Southwest Chengdu Base was fully completed. September 2013: FAW-Volkswagen's South Foshan Base was fully completed. November 2014: Construction officially began on FAW-Volkswagen's East Qingdao Base. December 2, 2014: The 10 millionth vehicle rolled off the production line at FAW-Volkswagen. May 2015: The first phase of the Changchun EA211 engine project was completed. May 18, 2016: FAW-Volkswagen's North China Base in Tianjin officially began construction. August 2017: The 15 millionth vehicle rolled off the production line at FAW-Volkswagen.

14

3

Share

What Causes a Diesel Engine to Emit Black Smoke?

The reasons for a diesel engine emitting black smoke may include the following: 1. Poor diesel quality: The performance indicators of the diesel used do not meet standard requirements, leading to poor combustion and the production of black smoke. 2. Blocked air intake: Insufficient air supply during diesel combustion results in incomplete combustion, causing the diesel engine to emit black smoke. 3. Insufficient compression force: The required pressure does not meet combustion demands, worsening combustion conditions and leading to black smoke emission from the diesel engine. 4. Changes in combustion environment: Alterations in the shape and volume of the combustion chamber further degrade the quality of fuel-air mixture, preventing the formation of a proper mixture and resulting in black smoke. 5. Clogged air filter: Excessive dust and particles in the air cause the filter element to accumulate dirt and debris, increasing intake resistance and reducing air supply. This lowers combustion efficiency, leading to black smoke emission from the diesel engine. 6. Malfunctioning fuel injector: Mainly manifested as poor spray quality, insufficient injection pressure, and injector dripping. These conditions prevent the fuel from fully mixing with the air in the cylinder, causing incomplete combustion of diesel and the appearance of black smoke.

1

0

Share

What are the engine specifications of the Hanlong Kuangshi?

Hanlong Kuangshi's engine has a maximum power of 160kW, maximum horsepower of 218Ps, maximum torque speed of 370Nm, and the model specification is TN4A20TDZ. The Hanlong Kuangshi's engine is produced by the Hubei Daye Hanlong Engine Factory, so it is a domestically manufactured engine. For the Hanlong Kuangshi's engine, the following maintenance methods can be used daily: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and keep the oil level moderate. When the oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to bypass through the bypass valve and bring contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking filters and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

15

1

Share

Why is the heater in Iveco vehicles not producing heat?

The reasons why the heater in Iveco vehicles is not producing heat are as follows: 1. Lack of coolant: Due to damage to components of the engine's water circulation system, leaks at interfaces, or a blown head gasket, the coolant level may be insufficient. This results in only a small amount of coolant circulating or no circulation at all in the heater pipes, leading to the heater not producing heat. 2. Thermostat: The thermostat may have been removed during previous repairs due to issues like high water temperature and not reinstalled, or the thermostat may be damaged and stuck in the open position. This causes the engine's water circulation to remain in a large loop continuously. Combined with low external temperatures and efficient heat dissipation, the engine's water temperature struggles to rise, resulting in the heater not producing heat. 3. Heater core and heat exchanger: Although modern vehicles use antifreeze as coolant, it does not completely prevent rust and corrosion. Over time, impurities can still form. During routine engine repairs, red glue or other contaminants may enter the water passages. Some automatic transmission models have a heat exchanger on the transmission. If the heat exchanger becomes clogged, it can also cause the heater to not produce heat. Additionally, some models have vent ports near the heater core; incomplete venting can also lead to the heater not producing heat. 4. Heater control mechanism: Damage to components such as the air conditioning panel's temperature servo motor or the heater water valve, or electrical faults in the heater system, can prevent the heater from functioning properly.

2

Share

What brand is Mercedes-Benz's dedicated engine oil?

Mercedes-Benz's dedicated engine oil is Mobil 1 Gold. Below is more information about Mobil 1 Gold: 1. Mobil 1 Gold is a fully synthetic engine oil, representing the top-tier product in the Mobil series. It comes in multiple viscosity grades including 0W20, 0W30, 0W40, 5W30, and 5W40. Mobil 1 Gold offers outstanding performance in lubrication and other aspects. 2. It provides excellent protection for advanced multi-valve engines, featuring superior oil quality to reduce engine wear. It offers optimal protection during critical moments of vehicle startup, with exceptional high and low-temperature performance. It ensures smooth cold starts and maintains high-temperature stability, protecting engine components at both low and high temperatures while cooling the engine. It delivers excellent lubrication, reduces engine load, and improves fuel economy. 3. Apart from its relatively high price, Mobil 1 Gold currently has no significant issues. As for the oil change interval, it is typically recommended every 10,000 kilometers or about one year. However, this should be adjusted based on driving conditions, environment, and other factors.

11

3

Share

How to Turn On the Audio When It's Off in the Mazda3 Axela?

How to Check the Remaining Fuel Gauge Bars on the Roewe i5?

Which country's brand is FAW-Volkswagen?

What Causes a Diesel Engine to Emit Black Smoke?

What are the engine specifications of the Hanlong Kuangshi?

Why is the heater in Iveco vehicles not producing heat?

What brand is Mercedes-Benz's dedicated engine oil?

What is the engine model of the Passat?

How to Remove Snow from a Car?

Should Daytime Running Lights Be Turned Off?

What Are the Effects of a Dead Car Battery on the Vehicle?