How to Turn On the Ambient Lights in the 2019 Sagitar?

How Heavy Are Motorcycles Generally?

Ordinary motorcycles weigh between 150 kg and 250 kg, generally depending on factors such as displacement, model, and brand. Appearance Inspection: Check whether the motorcycle's paint is bright and even, and assess the quality of the paint; whether the surface of the plated parts is bright, with no exposed damage or spots; whether the welded joints are smooth; whether the machined surfaces are smooth; whether all parts of the vehicle are complete and undamaged; and whether the front and rear shock absorbers are properly aligned. Engine Inspection: After all preparations are completed, the engine should start quickly and reliably. At normal temperatures, the cold start time should not exceed 15 seconds (excluding auxiliary time), and the kick-start should not require more than three attempts. After starting, the engine should run at medium and low speeds for 30 minutes without overheating in any part. Idle operation should be stable and free of abnormal noises. Under load, the engine should run smoothly. When measured with a tachometer, the maximum operating speed should exceed the rated speed. After the engine is warmed up, with the engine in neutral, rapidly opening the throttle should result in a corresponding increase in engine speed. Test Ride Inspection: If conditions permit, a test ride over a short distance should be conducted, focusing on the following checks: whether the noise from the transmission and drive components is normal; whether the engine overheats and whether power delivery is smooth; whether the clutch disengages completely without dragging and engages smoothly; whether the gear shift lever operates flexibly without sticking or gear slippage; whether the handlebar steering is light, flexible, and precise; whether the brakes are reliable and free of abnormal noises; and whether the throttle cable and various switches are flexible and effective.

10

4

Share

What is the fuel tank capacity of the 3.5L Prado in liters?

Toyota Prado has a fuel tank capacity of 87 liters, and the manufacturer recommends using 92-octane gasoline. Before refueling, turn off the engine, locate and press the fuel tank cap release button on the left side of the driver's seat to open the fuel tank cap. The Toyota Prado is a mid-to-large SUV equipped with a 3.5L 280-horsepower V6 engine and a 6-speed automatic transmission. The engine delivers a maximum power of 206 kW and a maximum torque of 365 Nm. The vehicle dimensions are 4840 mm in length, 1885 mm in width, and 1890 mm in height. It features a 5-door, 7-seat SUV body structure and can reach a top speed of 175 km/h.

15

3

Share

What kind of engine oil is used for the Tiguan L?

The Tiguan L uses 5W40 engine oil or 0W40 fully synthetic engine oil. If you want to change the oil during later maintenance, you can choose from three different types of oil: 5W-30 Castrol fully synthetic, 5W-40 original fully synthetic, and 5W-40 original mineral oil. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value indicates better ability to maintain viscosity at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in the Tiguan L is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; Apply oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the oil filler cap on the engine valve cover, typically filling about three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check that the oil level is within the standard range.

13

2

Share

How Long Does It Take to Schedule a Retake for Subject 2?

Subject 2 retakes can only be scheduled ten days after the initial attempt. More related information is as follows: 1. These ten days are calculated starting from the day after the candidate fails the exam, meaning the retake can only be scheduled on the eleventh day. 2. Scheduling the exam does not mean you can take it immediately. The actual exam date depends on the successful scheduling time, and usually, several more days are required after successful scheduling before the retake can be conducted. More information about Subject 2 is as follows: 1. In driving schools, for C1 and C2 license training, the theoretical study time for Subject 2 must reach 2 hours, and the practical training time must reach 22 hours before the exam can be taken. 2. Additionally, many driving schools report the exam list based on the students' proficiency level, meaning the practice time is not fixed.

1

2

Share

How Often Should the Coolant Be Replaced in a Magotan?

Replace the coolant in your Magotan every two years. Before performing a complete coolant replacement, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with particular attention to the five-way water pipe. The five-way pipe is named for its five connecting interfaces that link various parts. The coolant is distributed to different sections of the car after flowing through the five-way pipe to perform its function. If there is any sign of coolant leakage in this area, replace the water pipe or resecure the connections as needed. Drain the old coolant and then flush the fluid channels with clean water. Add clean water to the coolant reservoir and continue filling it until water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may have a faint pink tint. Continue adding clean water until the outflow is clear. Remember to disconnect the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, pour another container of coolant into the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level may drop as air is purged from the cooling system. Top up the coolant until it reaches the "MAXT" mark on the reservoir.

13

3

Share

Can people with myopia drive?

According to the regulations on the application and use of motor vehicle driving licenses, individuals with myopia are permitted to drive. When applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tram driving licenses, the naked-eye or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. For other types of driving licenses, the naked-eye or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. The physical requirements for obtaining a driving license are as follows: 1. Height: Applicants for large passenger vehicles, large trucks, or trolleybuses must be at least 155 centimeters tall. 2. Vision: Applicants for large passenger vehicles, large trucks, or trolleybuses must have naked-eye or corrected vision of both eyes reaching 5.0 or above on the logarithmic visual acuity chart. For other types of driving licenses, the naked-eye or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. 3. Color vision: No red-green color blindness.

7

4

Share

How to Turn On the Ambient Lights in the 2019 Sagitar?

How Heavy Are Motorcycles Generally?

What is the fuel tank capacity of the 3.5L Prado in liters?

What kind of engine oil is used for the Tiguan L?

How Long Does It Take to Schedule a Retake for Subject 2?

How Often Should the Coolant Be Replaced in a Magotan?

Can people with myopia drive?

Where is the mobile phone charging port in the 2021 Sylphy Classic?

Can a new car without a temporary license plate drive on the highway?

Reasons for Right-side Line Crossing During Reverse Parking

Why Do Electric Cars Accelerate Faster?