How to Turn On the Ambient Lighting in a 2020 Audi A4?

How Often Should the Engine Oil of a Moped Be Changed?

For mopeds, the engine oil should be changed every 300 to 500 kilometers during the break-in period, and every 800 to 1,000 kilometers after the break-in period. Here are some precautions for motorcycle riding: 1. Break-in period: During the break-in period, the riding speed should not exceed 50% of the maximum power speed, and the maximum speed should not exceed 75% of it. 2. After the break-in period: The maximum riding speed should not exceed 75% of the maximum power speed, as this may cause unnecessary malfunctions during riding. 3. Gear usage: Taking a common 125CC motorcycle as an example, 1st gear is only used for low-speed starts or climbing very steep slopes. Shift to 2nd gear immediately after starting. 2nd gear is generally used for speeds between 10-20, and 3rd gear is suitable for speeds between 20-40. 4th gear is suitable for speeds between 30-50. Generally, speeds above 40 can be driven in 5th gear.

9

5

Share

Where is the Geely Vision Toolbox Located?

Geely Vision toolbox is located under the front passenger seat. The main purpose of the Vision toolbox is to change the spare tire, as car tires are most prone to failure during journeys. Tire Size: The tire size for this model is 205/60-R16, where 205 represents the tire width of 205mm, 60 indicates the aspect ratio of 60%, R stands for radial tire, and 16 denotes the rim size of 16 inches. It can be seen that Vision's tires are relatively wide. Tire Replacement: Use a wrench to remove the screws of the damaged tire. Jack up the car body, usually the jacking position is under the middle part of the vehicle with certain markings. Raise the car just enough to remove the tire. During the tire removal process, master the diagonal screw removal method.

2

5

Share

How many kilometers can a Mercedes-Benz S600 run on a full tank of fuel?

Mercedes-Benz S600 can run more than 300 kilometers on a full tank of fuel. Fuel tank capacity: The Mercedes-Benz S600 is a rear-wheel drive vehicle. Due to the large size of the V12 engine, the engine compartment cannot accommodate Mercedes-Benz's four-wheel drive system. Therefore, it adopts rear-wheel drive while still delivering powerful performance. The 0-100 km/h acceleration time of the Mercedes-Benz S600 is 4.6 seconds, and it has an 80L fuel tank capacity. Fuel consumption: The Mercedes-Benz S600 consumes 12.3 liters of fuel per 100 kilometers. The fuel consumption per 100 kilometers is a theoretical experimental data calculated by the manufacturer under objective conditions. It is obtained by measuring values with a dynamometer installed on the vehicle chassis, converting them into speed parameters, and then calculating the fuel consumption at specified speeds.

10

5

Share

How to Determine if Car Tire Pressure is Normal?

Determine based on the tire pressure gauge measurement results. In summer, to prevent car tire blowouts, the general standard pressure is between 2.2-2.4 bar; while in winter, a tire pressure of 2.6-2.8 bar is required. Below are the relevant introductions: 1. Summer tire pressure: Because in summer, the overall temperature is relatively high, car tires are prone to heating up. When the tire pressure is too high, it can easily cause a blowout, so standard tire pressure is sufficient. 2. Winter tire pressure: Winter tire pressure is slightly higher than in summer because car tires undergo thermal expansion and contraction. Since winter temperatures are relatively low, it is generally most appropriate to control it between 2.6-2.8 bar. 3. Other control factors: (1) Load capacity: Whether half-loaded or empty, it is generally necessary to refer to the tire pressure limits indicated on the car's label sticker as a reference value. Fully loaded vehicles should also use the tire pressure limits indicated on the car's label sticker as their reference value. (2) The environment when measuring car tire pressure: the tire pressure is different when the tire is hot and when it is cold, with a general difference of about 0.2-0.3 bar between the two. If you want a more accurate tire pressure value, it is best to wait several hours after the car is turned off before measuring, otherwise, you should subtract about 0.2-0.3 bar. (3) It is worth noting for car owners that the tire pressure for cars frequently running long distances should not be too low and can be appropriately increased by about 0.2 based on the standard pressure.

7

1

Share

What are the maintenance items for the Mercedes-Benz B7?

B maintenance is performed at 20,000 kilometers, requiring the replacement of engine oil, oil filter, and air filter, along with an inspection of the cabin air filter. At 30,000 kilometers, the engine oil and oil filter screen should be replaced. The purpose of car maintenance: To keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. Contents of minor maintenance: Minor maintenance generally refers to the routine maintenance items performed at the manufacturer-specified time or mileage to ensure vehicle performance. It mainly includes replacing the engine oil and oil filter. Contents of major maintenance: Major maintenance refers to the routine maintenance performed at the manufacturer-specified time or mileage, which includes replacing the engine oil, oil filter, air filter, and fuel filter.

1

5

Share

How Long Does the Motor Vehicle Subject Three Exam Take?

Subject Three, from getting into the car to the end of the exam, takes about twenty minutes. Here are the relevant details: 1. Subject Three Exam Content: Subject Three tests the comprehensive ability to drive on the road. For example: Before getting into the car, you need to walk around the vehicle to check for obstacles around and under the vehicle. The correct posture when entering the car, driving posture, and operation methods are assessed. You must know to fasten the seatbelt, check the dashboard and three mirrors before starting, ensure the starting air pressure meets the requirements for air-brake vehicles, and listen for any abnormal engine sounds. The methods for starting, changing speed, and stopping must be correct. The principles for overtaking, yielding, meeting, and following other vehicles should be followed. The methods for turning and changing lanes or positions are also tested. 2. Precautions for Subject Three Exam: If the candidate's score falls below the passing mark during the exam, the system will automatically prompt the candidate to pull over. After completing the pull-over action, the system will prompt for the next exam attempt. After completing all required exam items and driving a distance of more than 3 kilometers, the system will automatically prompt to pull over. Upon hearing the pull-over instruction, the candidate should choose a clear curb (or solid road edge line) on the exam route and complete the pull-over action safely. After pulling over, the system will announce the exam results.

1

Share

How to Turn On the Ambient Lighting in a 2020 Audi A4?

How Often Should the Engine Oil of a Moped Be Changed?

Where is the Geely Vision Toolbox Located?

How many kilometers can a Mercedes-Benz S600 run on a full tank of fuel?

How to Determine if Car Tire Pressure is Normal?

What are the maintenance items for the Mercedes-Benz B7?

How Long Does the Motor Vehicle Subject Three Exam Take?

What are the causes of low cylinder compression pressure?

Where to Take the Subject 4 Exam?

Which is better for car refueling, 92 or 95?

Are electric vehicles subject to traffic restrictions based on license plate numbers?