How to turn on the air conditioning in the Roewe RX5?

1 Answers
RuthLynn
07/29/25 2:48pm
The air conditioning in the Roewe RX5 is turned on using the control switches on the air conditioning panel. Steps to turn on the cold air: 1. Turn on the A/C switch of the car air conditioning. 2. Rotate the temperature control button to the cold air mode. 3. Adjust the fan speed button to set the appropriate wind speed for cold air mode. To turn on the warm air, there is no need to turn on the A/C switch. Simply rotate the temperature control button to the warm air mode and then adjust the fan speed button. Precautions for turning on the warm air in the Roewe RX5: 1. After starting the car, wait about 8-15 minutes for the water temperature to rise to normal temperature before turning on the warm air (i.e., when the water temperature reaches the middle level). 2. Adjust the air circulation mode to internal circulation. 3. Switch to warm air mode, which is indicated by a red zone on some cars or a sun symbol on others. 4. Do not turn on the A/C switch, as the warm air utilizes the car's own heat circulation to save energy. 5. Adjust the air conditioning to the appropriate level and set the air outlet direction. 6. The warm air should be directed forward and towards the feet, while the cold air should be directed forward.
Was this review help?
16
0
Share
More Forum Discussions

Can Small-Displacement Vehicles Drive on the Grassland Sky Road?

Small-displacement vehicles can drive on the Grassland Sky Road. Here are some precautions for driving: 1. Vehicle inspection before departure: Conduct a comprehensive check of the vehicle every day before setting off, including checking for oil or water leaks; measure tire pressure to ensure it is appropriate; inspect the engine oil condition; check if the spare tire is intact, etc. 2. Be cautious when wading: If encountering waterlogged roads, be aware of the water depth and the condition of the road beneath before deciding whether it exceeds the vehicle's capability. Avoid attempting to wade through water deeper than half the height of the car's tires. 3. Obey traffic rules: Especially on highways, do not speed. Speeding not only risks fines from traffic police but, more importantly, is unsafe.
13
5
Share

What is the difference between 1.5L and 2.0L displacement?

1.5L and 2.0L displacement differ in the following aspects: A 2.0L engine has a larger exhaust volume than a 1.5L vehicle. The power output of a 2.0L displacement engine is greater than that of a 1.5L displacement engine. Related explanations: 1. Introduction: Displacement (Swept-volume), a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or discharged per stroke or cycle. Generally, a larger displacement means the engine releases more energy (converting chemical energy from fuel into mechanical energy) per unit time, resulting in better "power performance". 2. Extension: The displacement range for compact cars is typically 1.0L-1.6L, while mid-size cars usually have displacements between 1.6L-2.5L. The fuel consumption of a 2.0L displacement engine is generally higher than that of a 1.5L displacement engine.
8
3
Share

Where is the DCU located in Dongfeng Tianlong?

Dongfeng Tianlong's DCU is located next to the urea tank. Meaning of DCU: DCU stands for Diesel Control Unit, which is the core of electronically controlled fuel injection, commonly known as the engine computer. It is a type of traction control unit. DCU control principle: The Dosing-Control-Unit (DCU) monitors vehicle status in real-time through sensors and precisely controls actuators via software calculations to achieve accurate system control. It can be integrated into Bosch EDC17CV electronic control units.
20
1
Share

Is Removing Car Doors a Big Deal?

Removing car doors has significant impacts. Below are relevant introductions about car doors: 1. Function: Car doors provide access for drivers and passengers to enter and exit the vehicle, isolate external disturbances, and to some extent mitigate side impacts to protect occupants. 2. Performance: The aesthetics of a car are also related to the design of its doors. The quality of car doors is mainly reflected in their anti-collision performance, sealing performance, ease of opening and closing, and of course, other functional indicators. Anti-collision performance is particularly important because during a side collision, the buffer distance is very short, making it easy for occupants inside the vehicle to be injured.
9
1
Share

What are the precautions for buying a new car?

1. Inspect the vehicle's paint surface: Visually examine the body paint for scratches and wear. Check for color differences under ample sunlight by opening doors and adjusting angles to observe light reflections from various perspectives to assess panel smoothness. If available, use a paint thickness gauge for verification. 2. Examine bodywork quality: Verify whether connection gaps between components like the hood, doors, fuel cap, taillights, and headlights are even. Uneven gaps may indicate part replacements. Also inspect seals around windows and doors for damage to prevent water leakage during rain. 3. Check the vehicle identification plate: Located on the driver's side door or in the engine compartment, confirm the VIN consistency and check if the manufacturing date is too distant. Generally, if exceeding six months, the vehicle might be inventory stock or a test-drive model.
13
0
Share

Which is the air recirculation mode in AM?

"When the car air conditioning indicator A is lit, it automatically switches between air recirculation and fresh air intake based on the air quality inside and outside the vehicle. When the car air conditioning indicator M is lit, it is in forced air recirculation mode. When either the A or M indicator is on, it is not entirely in fresh air intake mode. Only when neither the A nor M indicator is lit is it in fresh air intake mode. The functions of air recirculation and fresh air intake are different. Air recirculation mode can enhance the cooling effect of the air conditioning. Although the cooling effect is better, prolonged use of air recirculation can reduce the air quality inside the vehicle. The main feature of fresh air intake mode is maintaining the freshness of the air inside the car (specifically in areas with good outside air quality). The purpose of fresh air intake mode is ventilation. When the air inside the car becomes relatively stale, you can switch to fresh air intake mode to replace the air and improve the air quality inside the vehicle. Air recirculation mode helps maintain warmth in winter and keeps the air cool in summer. Prolonged use of air recirculation poses risks, so it is advisable to alternate between air recirculation and fresh air intake. When using air recirculation mode, switch to fresh air intake mode every hour because the high levels of carbon dioxide exhaled by passengers can make the air stale, necessitating fresh air intake to improve air quality. If you want to cool the car quickly after turning on the air conditioning, activating air recirculation mode can shorten the cooling time."
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.