How to turn on the air conditioning in the Jetour X70?
2 Answers
Here is how to turn on the air conditioning in the Jetour X70: Press the A/C button on the center console to activate the air conditioning, then adjust the fan speed and temperature as needed. Here is some related information: 1. The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the cabin. It provides a comfortable environment for passengers, reduces driver fatigue, and enhances driving safety. 2. The car air conditioning refrigeration system consists of a compressor, condenser, receiver-drier, expansion valve, evaporator, and blower. These components are connected by copper (or aluminum) pipes and high-pressure rubber hoses to form a sealed system. During operation, the refrigerant circulates through this sealed system in different states, with each cycle consisting of four basic processes: (1) Compression process: The compressor sucks in low-temperature, low-pressure refrigerant gas from the evaporator outlet and compresses it into high-temperature, high-pressure gas, which is then discharged from the compressor. (2) Heat dissipation process: The high-temperature, high-pressure superheated refrigerant gas enters the condenser. Due to the reduction in pressure and temperature, the refrigerant gas condenses into a liquid, releasing a large amount of heat. (3) Throttling process: The higher-temperature and higher-pressure refrigerant liquid passes through the expansion device, where its volume increases, and its pressure and temperature drop sharply, exiting the expansion device as a mist (fine liquid droplets). (4) Heat absorption process: The mist-like refrigerant liquid enters the evaporator. Since the boiling point of the refrigerant is much lower than the temperature inside the evaporator, the refrigerant liquid evaporates into a gas.
Driving the Jetour X70, I find the air conditioning system very worry-free, mainly relying on the auto mode. After starting the engine, simply press the AUTO button on the center console, and the AC system will automatically adjust based on the cabin temperature and your preset values. If it feels too hot, rotate the temperature control knob to set it around 22°C; for cooler air, adjust it to 18°C. The fan speed adjusts automatically, but you can manually change it using the fan speed +/- buttons. The center screen allows you to switch between recirculation and fresh air modes: use recirculation on rainy days to prevent fogging, and fresh air on sunny days for better ventilation. During long drives, remember to switch modes periodically to avoid stuffiness or window fogging. Also, avoid setting the fan to high immediately after starting to prevent overloading the compressor. I recommend checking the cabin air filter during every maintenance service to ensure clean and efficient airflow.
