How to Turn On the Air Conditioning in the 10th Generation Accord?
3 Answers
The method to turn on the air conditioning in the 10th Generation Accord: After starting the car, press the AC button to activate the air conditioning. Below are the specific operations for other air conditioning functions: 1. Defogging: The front and rear windshield defogging functions have dedicated buttons. Press the corresponding button to activate the heating defogging. 2. Heating: Simply increase the temperature to turn on the heating. Additionally, the A/C function should be turned off when cooling is not needed, as the compressor only operates during the cooling phase. Heating is achieved through the engine's coolant and the heat from the glass heating wires. 3. AUTO: When the AUTO function is enabled, the air conditioning enters an intelligent regulation phase, eliminating the need for manual settings. The system determines whether to increase/decrease the fan speed and whether to cool/heat based on sensor signals. 4. Internal/External Circulation: The difference between internal and external circulation is that internal circulation uses air from inside the car, while external circulation brings in outside air to replace the existing cabin air. Use internal circulation in congested areas or environments with poor air quality. On highways, periodically switch from internal to external circulation, with internal circulation ideally not exceeding 1 hour. 5. Temperature Zone Sync: The temperature zone sync function ensures that changing the driver's temperature setting automatically adjusts the other zones accordingly. When this function is disabled, each temperature zone can be controlled separately.
I just bought a 10th-generation Accord, and turning on the AC is actually quite simple. First, start the car to let the engine run so the AC has power. Then, find the AUTO button on the center console and press it—the system will automatically adjust the temperature and airflow. If you want to adjust the cooling or heating, just turn the temperature knob nearby to set your preferred level. If the airflow feels too strong or too weak, press the airflow buttons to increase or decrease it. Some models even allow you to switch between internal and external air circulation via the touchscreen—using external circulation in summer provides better ventilation. Remember, don’t blast the AC as soon as you get in the car; let some natural air flow first to avoid sudden fogging. Also, checking the AC filter during car washes is important, as a dirty filter can affect performance.
Having driven the Accord for several years, I've developed the habit of pressing the AUTO button for the air conditioning as soon as I get in the car. It automatically adjusts based on the cabin temperature, which is both convenient and fuel-efficient. I set the temperature knob to my preferred 25 degrees, and the system automatically adjusts the fan speed, though I sometimes manually increase it by one notch for extra cooling on hot days. Adjusting the air recirculation via the center console screen is practical, especially using the internal circulation on highways to maintain temperature. Before each drive, I check the air conditioning for cleanliness to avoid unpleasant odors. Simply put, after starting the car, it's a three-step process: press the button, adjust the temperature, and close the windows while it works. Regular maintenance of the air conditioning system can extend its lifespan, so don't wait for problems to arise before servicing it.
