···
Log in / Register

How to Turn on the Air Conditioning in Buick Excelle?

3 Answers
LaLucille
09/07/25 2:12am
To turn on the air conditioning for cold air, press the A/C switch to activate cooling, then adjust the temperature and air outlet mode. According to the principle that hot air rises, directing the cold air upward can cool down the interior temperature more quickly. Additional information is as follows: 1. Buick Excelle Air Conditioning System: The control panel for the Buick Excelle air conditioning system is located below the central multimedia screen on the dashboard. Alternatively, you can also set the air conditioning system through the air conditioning interface in the multimedia system. By pressing the "Air Conditioning" button on the infotainment main screen, you can control the fan, air delivery mode, air conditioning mode, and set temperature. If the vehicle is equipped with voice recognition, you can adjust the temperature control system using voice commands. 2. Dry Anti-Mildew Function: Most modern air conditioning systems are designed with a dry anti-mildew function, which means that after cooling ends, it blows natural air for 10-20 minutes (depending on the specific model). Some models may also blow warm air briefly towards the end of the drying process. The purpose is to fully evaporate any residual moisture on the evaporator (the aluminum foil seen in the indoor unit) to prevent mold growth.
Was this review help?
4
3
Share
DeNova
09/18/25 8:29am
Turning on the air conditioning in the Buick Excelle is actually quite simple. Every time I get in the car, I start the engine first and wait for the RPM to stabilize before pressing the AC button on the climate control panel. This button is the core of the cooling system—it must light up to indicate activation. Then I turn the temperature knob all the way to the left; the blue zone is the coldest setting. For the fan speed control, I prefer setting 2 or 3—starting with maximum speed can cause headaches. Don’t forget to press the recirculation button, or hot air will keep seeping in. The dashboard vents can also be adjusted; I usually angle them toward my chest. In winter, remember not to press the AC button when using the heater—this is an operational detail my mechanic specifically reminded me about.
Was this review help?
17
0
Share
Expand All
VanLeonardo
11/02/25 2:09am
I've been driving the Excelle for three years and have developed a routine for the cooling operation. After starting the vehicle, I directly press the AC button and feel relieved only when the indicator light comes on. The temperature knob should be turned to the bottom of the blue area on the left, and the fan speed knob should be adjusted to the middle setting for the most comfort. An important tip is to press the recirculation button to allow the cabin air to circulate and cool. The automatic air conditioning model is more convenient—just press AUTO and then lower the temperature. When first turning on the air conditioning, it's recommended to open the windows for 30 seconds to ventilate before closing them, which helps quickly expel the hot air inside the car. I clean the vent filters every month, as dust can otherwise affect the cooling efficiency. It's also worth noting that idling for long periods with the air conditioning on consumes a significant amount of fuel.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

Is the Mazda Atenza the Same as the Mazda6?

The Mazda Atenza is the third generation of the Mazda6. The Mazda6 actually refers to the first generation, and the Mazda6 has a total of three generations: the first-generation Mazda6, the second-generation Mazda6 Ruiyi, and the third-generation Mazda6 Atenza. The Atenza is a newly developed and manufactured flagship model of mid-to-high-end sports sedans, which continues the design of the imported Mazda ATENZA. The Mazda Atenza has a length, width, and height of 4870 mm, 1840 mm, and 1445 mm respectively, with a wheelbase of 2830 mm. In terms of appearance, it features chrome trim as an addition to the lower fog lights, and the large-sized grille is very bright.
8
0
Share

Is Starting the Car in Neutral Harmful?

Starting the car in neutral does not cause any harm. When starting in neutral, the distance to shift into D (Drive) is the shortest, avoiding any jerking sensation. Alternatively, the car can also be started in P (Park), but shifting from P to D requires passing through R (Reverse), which can create some backlash and jerking, potentially affecting the transmission. For safety reasons, automatic transmission vehicles must be in P or N (Neutral) to start the engine, so starting in neutral is perfectly acceptable and won't damage the vehicle. However, when starting in neutral on a slope, it's essential to apply the brakes to prevent the car from rolling backward.
11
0
Share

Do Front-Wheel Drive Cars Have Differential?

Front-wheel drive cars do have a differential. Both front-wheel drive and rear-wheel drive vehicles are equipped with only one differential, which is installed on the drive axle. The car differential is a mechanism that allows the left and right drive wheels to rotate at different speeds. It mainly consists of left and right half-shaft gears, two planetary gears, and a gear carrier. Its function is to enable the left and right wheels to roll at different speeds when the car is turning or driving on uneven roads. The axle that synchronizes the rotation of the wheels must be divided into left and right halves and connected by a differential gear mechanism. When turning, the differential mechanism eliminates the tire slippage caused by the difference in the distance traveled by the inner and outer wheels. Since the drive wheels must rotate synchronously with the axle, both front-wheel drive and rear-wheel drive axles must be equipped with a differential.
9
3
Share

How to Replace the Battery in an Older Mercedes-Benz CLA45 Key?

The method to replace the battery in an older Mercedes-Benz CLA45 key: 1. From the tail of the key, push the switch upwards, and the hidden mechanical key will pop out slightly, allowing you to remove the mechanical key; 2. Use the just-removed mechanical key to press against the slot position, and with a slight force, the key shell can be opened; 3. After opening the key shell, you can see the battery position is relatively deep. Insert an object along the gap on both sides and gently pry to remove the old battery; 4. Begin installing the new battery by inserting the top of the shell first, then pressing firmly on the other end to complete the battery replacement. The older Mercedes-Benz CLA45 features a front grille with a dual-slats design combining thick and thin elements, a redesigned front spoiler, and red brake calipers paired with new-style alloy wheels, creating a striking visual impact. The interior adopts an all-black color scheme with extensive use of chrome trim, delivering an excellent visual effect. The vehicle is powered by a high-performance version of a 2.0L turbocharged engine, with a maximum power output of 360 kW and a peak torque of 450 Nm.
17
5
Share

What to Do If Your Car Gets Flooded Without Purchasing Water Wading Insurance?

Solutions for a car getting flooded without purchasing water wading insurance: 1. Whether the car is parked by the roadside and flooded or stalled due to driving into a waterlogged area, do not attempt to restart the engine or move the vehicle; 2. Ensure your safety first, then promptly take photos of the vehicle damage and the scene for subsequent damage assessment; 3. Call the insurance company to report the incident and await rescue. Note that the insurance must be reported within 48 hours of the incident, otherwise the insurance company will not compensate. Generally, after a car is submerged in water, it needs cleaning and repairs. The extent of repairs varies depending on the flooding situation and depth. If the vehicle's onboard computer, interior, seats, or other peripheral components are damaged due to water ingress, the insurance may cover the costs.
8
5
Share

Should the car radiator antifreeze be replaced?

Car radiator antifreeze can be replaced because antifreeze also has a service life. If the old antifreeze is not drained and only new antifreeze is added, it will affect the quality of the antifreeze. The method for replacing antifreeze: 1. Open the engine hood, locate and unscrew the radiator cap, then find the drain valve along the radiator. The drain valve is usually located at the bottom to facilitate the drainage of antifreeze; 2. Open the drain valve and continuously inject clean water into the engine cooling system; 3. Wait for the clean water to drain completely, close the drain valve, and add new antifreeze until the liquid level is between the max and min marks; 4. Close the radiator cap, start the car, and let the engine idle for 2 to 3 minutes. Then, check the antifreeze level again and top it up to the appropriate level if necessary.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.