How to Turn on the Air Conditioning in Baojun 360?

3 Answers
VonAlivia
07/28/25 12:03pm
To turn on the air conditioning in Baojun 360, you need to adjust the air volume control button to your preferred wind speed. If cooling is needed, turn on the AC, adjust the blower level, and set the temperature control to the blue zone. If heating is needed, turn off the AC, adjust the blower level, and set the temperature control to the red zone.
Was this review help?
9
1
Share
McRosalie
08/11/25 4:53pm
Based on my years of experience driving the Baojun 360, turning on the AC is quite simple: After starting the car engine, don't rush to turn it on immediately. Wait about 30 seconds for the engine to warm up, then press the A/C button on the center console to activate the air conditioning compressor. Use the adjacent knob to adjust the temperature – around 23°C is comfortable in summer, while a higher setting like 25°C works better in winter. I prefer manual fan control, increasing it initially for faster cooling and reducing once comfortable. The Baojun 360's AC responds quickly, cooling within minutes. Remember to check the recirculation button – use external air circulation on highways for fresh air, and switch to internal recirculation in traffic or poor air quality to avoid dust. Regular AC filter cleaning is crucial to prevent odors and save energy. I recommend checking every six months to maintain cooling efficiency and fuel economy.
Was this review help?
5
4
Share
Expand All
LaAlex
09/28/25 6:18am
As a novice driver getting familiar with the Baojun 360, I was initially confused about using the air conditioning but now have mastered it: After starting the ignition, simply press the AC switch on the center console (the one with the snowflake icon) to activate the compressor, then turn the temperature knob to set your desired level, like 22°C. In automatic mode, pressing the AUTO button lets the system adjust the fan speed automatically, which is convenient and user-friendly. However, I initially practiced using the manual fan speed controls to get the hang of it. Note that you shouldn’t turn on the AC immediately after ignition—wait a few seconds for the car’s sake. The Baojun 360’s air vents are adjustable, so avoid directing them straight at your face for comfort. Also, don’t overlook the recirculation button—use external circulation for ventilation on hot or rainy days, and switch to internal circulation in urban smog to protect your health. Learning these small tricks in a new car can enhance your driving peace of mind.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

How to Perform Launch Control and Drifting with an Automatic Transmission?

Launch control puts significantly higher stress on the engine and transmission compared to normal driving. Many manufacturers impose limits on the number of launch control attempts - if engine or transmission damage occurs due to exceeding these limits, warranty coverage may be voided. Therefore, it's crucial to warm up the vehicle before attempting launch control. Below are key points about launch control: 1. Overview: Launch control is an acceleration technique that utilizes the transmission to maintain engine RPM at the peak torque output range, enabling maximum torque delivery right from start for optimal acceleration. 2. Important Notes: As a racing technique, launch control should only be attempted on closed courses or racetracks. Performing launch control on public roads with traffic constitutes dangerous driving behavior.
9
2
Share

What is Subaru Eyesight?

Subaru Eyesight refers to a driver assistance system designed to prevent accidents and minimize injuries. Here are the relevant details: 1. Subaru Eyesight Lane Departure Correction Assist: When the vehicle is traveling at 60km/h on a dedicated motor vehicle lane, if the vehicle deviates from the lane, the steering wheel assist will activate to prevent lane departure and enhance driving safety. 2. Subaru Eyesight Pre-Collision Function: It controls the engine's power output to prevent sudden acceleration caused by operational errors. However, it may not activate in certain situations due to factors such as the shape of walls or obstacles ahead, as well as differences in viewing angles.
17
4
Share

Does a missing chunk of tire tread have any impact?

Tire tread missing a chunk does have an impact. Here are the relevant details about tire tread peeling: 1. Tread surface peeling: If a small piece peels off the tread pattern, it's not a major issue for daily driving, but high-speed driving is not recommended. 2. Sidewall peeling: If the sidewall peels, it's advisable to replace the tire because the sidewall is the weakest part of the tire. If the fabric layers are exposed, it becomes quite dangerous and highly prone to blowouts. For safety reasons, it's generally recommended to install a new tire. If the damage depth and width are less than 3mm, the tire can be demoted to spare tire use.
2
5
Share

What is the correct range for the timing chain of the Volkswagen EA888?

The correct range for the timing chain of the Volkswagen EA888 is +3 to -3 degrees. Solution for timing error data: A dual-trace oscilloscope can be used to connect to the signals of the camshaft position sensor and the crankshaft position sensor for comparative analysis. Timing data errors indicate that the engine timing chain is about to fail, and the timing chain and tensioner should be replaced promptly to avoid similar issues. Volkswagen EA888 engine: This is an engine designed by Volkswagen, integrating advanced technologies such as direct fuel injection, turbocharging, and variable valve timing, achieving a balance between power and fuel efficiency.
13
4
Share

What is the difference between 93h and 93v tires?

The differences between 93h and 93v tires are as follows: 1. Different properties: The 93h tire indicates the load index and speed rating of the tire. 93w respectively represent the load index and speed rating of the vehicle tire. 2. Different characteristics: h indicates that the tire can withstand a maximum vehicle speed of 210km/h. W represents that the maximum speed this tire can withstand is 270km/h. 3. Different maximum load capacities: 93h indicates that the maximum weight a single tire can bear is 650KG. The 93w tire is not.
8
3
Share

At What Age Can You Get a Driver's License?

You can obtain a small car driver's license between the ages of 18 and 70. Below are the relevant age requirements for obtaining a driver's license: 1. Ages 18-70: Eligible to apply for small cars, small automatic transmission cars, and light motorcycles. 2. Ages 26-50: Eligible to apply for large passenger vehicles. For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams, the applicant must have a naked or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. 3. Ages 24-50: Eligible to apply for tractor licenses.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.