How to turn on the air conditioning in BAIC New Energy vehicles?

2 Answers
VonSavannah
07/24/25 2:41pm
To turn on the air conditioning in BAIC New Energy vehicles, follow these steps: 1. After starting the vehicle, turn on the fan without activating the air conditioning; 2. Allow the fan to blow out the contaminated air from the air conditioning system, as well as the hot air inside; 3. After running the fan for natural air for 5 minutes, press the air conditioning button to activate the cooling function. Taking the 2019 BAIC New Energy EC3 Lingdong Edition as an example, its body dimensions are: length 3684mm, width 1630mm, height 1518mm, with a wheelbase of 2360mm. The body structure is a 5-door, 4-seat hatchback, and the curb weight is 1140kg.
Was this review help?
15
1
Share
Leon
08/11/25 8:24am
Operating the BAIC New Energy's air conditioning is quite straightforward. Let me start with the basic steps. After getting in the car and starting it, wait until the dashboard shows 'Ready.' Then, locate the air conditioning control area on the center console—there’s usually an AUTO button. Press it, and the AC will start running automatically, adjusting the fan speed based on the cabin temperature. If you prefer manual temperature control, use the adjacent knob: turn it clockwise to lower the temperature or counterclockwise to raise it. Setting it around 25°C usually feels comfortable. You can also adjust the fan speed with dedicated +/- buttons. Don’t forget to check the air recirculation mode—start with recirculation for quick cooling, then switch to fresh air mode for better ventilation. For safety, adjust settings while parked to avoid distractions while driving. When the AC is on, the fan noise is normal and nothing to worry about.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

Why Deflate Tires When Driving into the Desert?

Deflating tires when driving into the desert is done to reduce tire pressure and minimize the risk of blowouts. Here are the relevant details: 1. Overview: It's essential to deflate tires when entering the desert. The high desert temperatures make lower tire pressure crucial for reducing blowout risks while simultaneously increasing tire-sand friction for better traction. 2. Precautions: Avoid gear shifting during dune climbing. Before tackling steep sandy slopes, misjudging speed or slope conditions may lead to downshifting near the ascent point. While this maintains high RPM and power output, the downshift impact can abruptly reduce vehicle speed due to engine braking. A stalled vehicle attempting to climb while accelerating will gradually lose RPM as engine load increases, potentially causing engine shutdown or even getting stuck mid-slope.
4
4
Share

Where is the Vehicle Environmental Protection List issued?

Vehicle Environmental Protection List is issued by environmental protection departments. Below are the relevant details: 1. Introduction: The full name of the Environmental Protection List is the Vehicle Environmental Protection Information List. According to the "Announcement on the Disclosure of Environmental Protection Information for Motor Vehicles and Non-Road Mobile Machinery" issued by the Ministry of Environmental Protection, starting from January 1, 2017, motor vehicle manufacturers and importers must disclose key environmental protection information through the "Vehicle Environmental Protection Information List" before the product leaves the factory or the goods enter the country. 2. Issuing Location: Motor vehicle emission inspection agencies must strictly adhere to the emission inspection standards and upload the emission inspection data and electronic inspection reports to the environmental protection department, which then issues a unified coded emission inspection report. The environmental protection department no longer issues the Motor Vehicle Environmental Protection Inspection Compliance Mark.
2
2
Share

Is Starting at 2000 RPM with a CVT Considered Aggressive Driving?

Whether starting at 2000 RPM with a CVT is considered aggressive driving cannot be determined solely by the RPM; it depends on the rate of RPM change. Below is a detailed explanation: Introduction to Aggressive Driving: Pressing the accelerator to increase RPM from idle to 3000 within 1 second is considered aggressive driving. However, gradually pressing the accelerator to reach 3000 RPM over 10 seconds is not aggressive driving. As long as the RPM does not exceed the redline zone on the tachometer when the accelerator is pressed gradually, it is not considered aggressive driving. Similarly, if the RPM drops from 2000 to idle due to sudden braking, it is considered aggressive driving. Even at 5000 RPM, if you first release the accelerator to coast and then gently brake to reduce speed to idle, it is not aggressive driving. Impact of Aggressive Driving on the Vehicle: Aggressive driving on the road is dangerous and unsafe. It is important to reject street racing and be a law-abiding citizen. However, occasional aggressive driving, such as flooring the accelerator for acceleration or overtaking, or increasing cornering speed within the speed limit, will not significantly impact the vehicle. However, it is crucial not to violate any traffic laws and to prioritize safety. Aggressive driving places higher demands on the vehicle's condition, so occasional aggressive driving should be accompanied by more frequent vehicle inspections, maintenance, and replacement of wear-and-tear parts and rubber components.
7
0
Share

What Causes Intermittent Operation of a Car's Air Conditioning Compressor?

The main reason for intermittent operation of a car's air conditioning compressor is a loose contactor coil in the compressor. Here are the relevant details:1. Introduction: The car air conditioning compressor serves as the heart of the vehicle's AC refrigeration system, responsible for compressing and circulating refrigerant vapor. Compressors are categorized into fixed displacement and variable displacement types. Based on working principles, AC compressors can be divided into fixed displacement compressors and variable displacement compressors.2. Causes: Refrigerant leakage in the compressor - this requires checking and repairing the refrigerant lines; Loose wiring in the compressor contactor coil causing tracking electricity - the compressor cables need to be reconnected; Insufficient compressor oil - it's important to regularly add oil to the compressor, with the optimal oil level being at 2/3 capacity.
19
5
Share

Why is the car emitting smoke when going uphill?

When a car emits smoke while going uphill, it can be categorized into three types: black smoke, white smoke, and blue smoke. Below are the related causes: 1. Black smoke emission: The phenomenon of black smoke emission is more common in carburetor-equipped vehicles. This occurs because the fuel injection in carburetor models is not controlled by a computer but by the accelerator pedal. In some cases, excessive fuel enters the cylinder and is expelled before it can be fully burned, resulting in black smoke. 2. White smoke emission: White smoke may be caused by wear in the engine cylinder's gasket, creating a gap that allows a significant amount of coolant from the cooling system to enter the combustion chamber. Since water cannot burn, it turns into steam when heated and is directly expelled through the exhaust pipe. 3. Blue smoke emission: Blue smoke is often due to internal engine faults that cause engine oil to enter the combustion chamber and burn. There are generally two common scenarios: scratches on the cylinder walls or poor piston sealing or severe wear at the valve, all of which create gaps. The engine oil, originally meant for lubrication, enters the combustion chamber through these gaps and burns. When the unburned oil is expelled, it produces thick blue smoke.
12
0
Share

What brand is eurorepar?

eurorepar is Eurorepar. Here are the relevant introductions: 1. Introduction to Eurorepar: Since its establishment in France in 2002, the "Eurorepar Car Service Network" has successfully expanded to 25 countries, with a global total of over 4,700 stores. At the same time, the "Eurorepar Parts Brand" has successfully developed more than 60 product categories, covering over 12,000 product part numbers (SKUs). In the Chinese market, it currently offers more than 20 product categories, covering over 1,500 product part numbers (SKUs). 2. Chinese Market: The "Eurorepar" business under the PSA Group officially entered the Chinese market at the end of 2016. Currently, the business has established localized teams in China for product development, strategic procurement, and car service networks. The PSA Group also took controlling stakes in Shanghai Jianxin and Fujian Longxinda in February 2018 and March 2019, respectively, and acquired a stake in Shandong Youpei Chelian in November 2018. Additionally, in Guangdong, Yunnan, and Jiangxi, "Eurorepar" has established solid cooperative relationships with Guangdong Youerkuai, Yunnan Wanrong Auto Parts, and Jiangxi Baoxiang Auto Parts, respectively. As of now, the "Eurorepar Car Service Network" has over 400 franchise stores in China, mainly concentrated in regions such as Shanghai, Shandong, Zhejiang, and Fujian, with nearly 90 located in Shanghai.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.