How to Turn on the Air Conditioning in an Emgrand Car?

How to Disassemble an Emgrand Key?

Here are the steps to disassemble a Geely Emgrand car key: 1. Press the smart key switch and remove the mechanical key. 2. After removing the mechanical key, you will see an "OPEN" mark on the shell of the remote key. 3. Insert a flat-head screwdriver into the larger groove below "OPEN". 4. Turn the screwdriver to pry open the shell of the remote key. Note: The Geely Emgrand remote key uses a 3V CR2025 button battery. When the battery runs out, you can replace it yourself.

8

5

Share

What are the conditions for 'one refund and three compensations' under the Automobile Three Guarantees Law?

The conditions for 'one refund and three compensations' under the Automobile Three Guarantees Law are as follows: The cumulative repair time for the automobile exceeds 35 days within the Three Guarantees validity period. The same product quality issue has caused repairs to be performed more than five times cumulatively. Severe safety failures have been repaired twice cumulatively. Within 60 days from the date of purchase or within 3,000 kilometers of driving, the steering system fails, the braking system fails, the body cracks, or fuel leaks. During the Three Guarantees period for household automobile products, if any of the following situations occur, and the consumer chooses to replace or return the product, the seller shall be responsible for replacement or refund: 1. Safety performance issues: Severe safety performance failures have been repaired twice cumulatively, and the severe safety performance failures have not been eliminated or new severe safety performance failures have occurred; 2. Engine issues: If the engine and transmission cannot be used normally after being replaced twice cumulatively, or if the same major components of the engine and transmission cannot be used normally after being replaced twice cumulatively due to quality issues, the replacement times of the engine, transmission, and their major components shall not be counted repeatedly; 3. Body component issues: The same major components of the steering system, braking system, suspension system, front and rear axles, and body cannot be used normally after being replaced twice due to quality issues.

9

5

Share

What car is represented by a triangle with an 's'?

A triangle with an 's' represents the Citroën DS. Here are the specific details about the Citroën DS: 1. DS is a top-tier luxury automotive design brand from France, serving as the new-generation luxury vehicle brand under the PSA Peugeot Citroën Group. 2. The DS was the first car to utilize a hydropneumatic suspension system. This groundbreaking technology provided innovative solutions to engineering challenges, and today, similar technologies can be found in products from many premium automakers such as Jaguar, Audi, BMW, Porsche, and Rolls-Royce.

3

2

Share

Why are Japanese cars mostly naturally aspirated?

There are several reasons why Japanese cars predominantly use naturally aspirated engines: 1. When a turbocharger engages with the engine during operation, the turbine temperature can reach up to 1600 degrees Celsius, enough to make the turbocharger glow red; 2. Turbocharging technology emerged relatively late, while Japan's automotive industry started much earlier; 3. Naturally aspirated engines demonstrate significantly better fuel economy compared to turbocharged ones. Under the same displacement, naturally aspirated engines indeed consume considerably less fuel than their turbocharged counterparts. Natural aspiration is a method of air intake in automobiles, where atmospheric pressure forces air into the combustion chamber without the assistance of any supercharger.

20

1

Share

How to Reset the Maintenance Light on Hyundai ix35?

Here are the detailed steps to reset the maintenance light on Hyundai ix35: 1. Insert the key, but do not turn it. 2. Press and hold the trip meter reset button for 5-10 seconds, then turn the ignition to the ON position. 3. After another 5-10 seconds, start the engine. Keep holding the button throughout this process. 4. If the wrench indicator doesn't disappear, repeat the procedure several times. 5. Note that maintenance intervals vary by manufacturer settings. Refer to your vehicle's owner manual for the exact maintenance schedule. After servicing, technicians will reset the maintenance light using proper procedures.

12

1

Share

How to adjust the dashboard clock on the Ford Focus Classic?

Here are the detailed steps to adjust the dashboard clock on the Ford Focus Classic: 1. Locate the time reset button on the right side of the dashboard, which is a small protruding knob. Press it briefly to toggle between time and mileage display. When the time is displayed, press and hold for 3 seconds. 2. When the hour display starts flashing, press briefly to adjust the hour. 3. Then press and hold for 3 seconds again until the minute display flashes, and press briefly to adjust the minutes. 4. Finally, press and hold for 3 seconds or do nothing to return to normal time display. 5. Note that the car dashboard clock is only an auxiliary function and may not be highly precise. You can adjust it whenever there's a time discrepancy.

12

5

Share

How to Turn on the Air Conditioning in an Emgrand Car?

How to Disassemble an Emgrand Key?

What are the conditions for 'one refund and three compensations' under the Automobile Three Guarantees Law?

What car is represented by a triangle with an 's'?

Why are Japanese cars mostly naturally aspirated?

How to Reset the Maintenance Light on Hyundai ix35?

How to adjust the dashboard clock on the Ford Focus Classic?

How many days does it take for vehicle transfer registration?

How to adjust the seat in a Santana car?

What is the Audi FV6481LAQCG?

How Long Can a Private Car Be Driven?