How to Turn on the Air Conditioning in a Volvo S90?

1 Answers
AliyahDella
07/30/25 6:01am
First, you need to press the brake pedal to start the engine. Then, turn the key to the ST position to start the engine until the idle speed stabilizes. Turn the fan speed knob all the way to the right for maximum airflow. Rotate the temperature control knob to the left to activate the cooling mode. Press the A/C button to turn on the air conditioning compressor. Press the recirculation button to activate the interior air recirculation mode. To adjust the fan speed, click the fan blade icon on the air conditioning panel to increase or decrease the airflow.
Was this review help?
2
3
Share
More Forum Discussions

What Does Vehicle Technical Grade Mean?

Vehicle technical grade refers to the classification of a vehicle's technical condition. Generally, only vehicles that meet certain technical grades are permitted to engage in road transport operations. Below is more related information: According to the 'Regulations on Vehicle Technical Management for the Automobile Transport Industry' issued by the Ministry of Transport of the People's Republic of China, vehicle technical conditions are classified into the following grades: 1. Grade One, Well-Maintained Vehicle: New vehicles that have traveled up to two-thirds of the first scheduled major repair interval mileage and two-thirds of the second scheduled major repair interval mileage. The basic components and main parts of the vehicle's major assemblies are sturdy and reliable, with good technical performance; the engine runs stably without abnormal noises, has good power performance, fuel consumption does not exceed the specified standards, and exhaust emissions and noise comply with national standards; all equipment is complete and in good condition, with no reservations during operation. 2. Grade Two, Basically Well-Maintained Vehicle: Vehicles whose main technical performance and condition or mileage are below the requirements for a well-maintained vehicle but comply with GB7258-2004 standards and can participate in transport operations at any time. 3. Grade Three, Vehicle Needing Repair: Vehicles that have undergone the last level of maintenance before being sent for major repair or are undergoing major repair or awaiting replacement but are still in operation. 4. Grade Four, Out-of-Service Vehicle: Vehicles that are expected to be unrepairable in the short term or have no repair value.
18
1
Share

Why is there a humming noise after changing to snow tires?

After changing to snow tires, a humming noise may occur, possibly due to bearing issues caused during the tire replacement process. Solution: When replacing tires by yourself, it is recommended to pay attention to the torque of the wheel hub nuts. However, self-replacement is only an emergency measure. It is advisable to visit a repair shop as soon as possible for a four-wheel alignment to ensure even force distribution among all tires. Snow Tire Selection: Different tire tread patterns have varying degrees of noise suppression. Therefore, owners who prioritize quietness should try to choose tires with quiet tread patterns. Additionally, when the tread is excessively worn or exceeds the specified usage time, the noise suppression ability will decrease, so timely tire replacement is necessary.
4
2
Share

What is the reason for the wrench warning light appearing in the car?

The wrench light is a maintenance reminder light. It illuminates when the vehicle has reached a certain mileage, indicating that maintenance is required. The maintenance cycle of the car is preset at the time of manufacture, and the wrench light will appear at regular intervals to remind the driver to perform timely maintenance. For some car models, the wrench symbol will disappear after maintenance is completed; however, for others, it may not automatically disappear and must be cleared via a computer. The hazards of long-term lack of car maintenance are as follows: Brake fluid deterioration: Since brake fluid contains ethylene glycol, it deteriorates when exposed to water. The brake system is external and easily absorbs moisture from the air. If not replaced for a long time, moisture will mix in, leading to brake failure or inability to stop the car. Engine failure: If the car is not maintained for a long time, the engine may fail. Due to deteriorated or insufficient engine oil, internal components will wear severely. Thickened oil prevents proper lubrication of the engine, leading to issues like cylinder burning, cylinder scoring, or cylinder seizure. Brake pad wear: Frequent braking while driving, combined with long-term lack of maintenance, can cause severe wear on the car's brake pads, resulting in brake failure.
8
5
Share

How Long Does It Take to Become Proficient at Driving?

New drivers typically take about three months to become proficient. Here are some important considerations for new drivers: Pay attention to speed limit signs: Drive within the posted speed limits. Do not exceed the maximum speed allowed, and stay in the appropriate lane for your speed. Note that speed limits on highways are often segmented, requiring extra attention to speed limit signs. Avoid sudden braking on highways: This prevents rear-end collisions caused by vehicles behind not braking in time, and more seriously, multi-vehicle pile-ups. Stay focused while driving: Be mindful of guardrails to avoid scraping or even colliding with them due to insufficient safety distance or momentary distraction. Highways have wide lanes with multiple vehicles driving simultaneously, so it's advisable to stay away from guardrails when unnecessary.
17
4
Share

At what position should you stop the car in front before starting to reverse into the parking space?

If there is enough space in front of the garage, you can park the car straight and reverse directly into the garage. If there is not enough space, park the car at a 45-degree angle to the garage, then turn the steering wheel and reverse while keeping the car close to one side of the garage door by checking the rearview mirror. If you can't get in at once, when the car is halfway in, move forward a bit to straighten the car and reverse again. Below are specific tips for reversing into a parking space: 1. Identify the starting point: Take right-side reversing as an example. The car should be 1.2-1.8 meters away from the left line at the starting position, with the front wheels straight and the car body parallel to the left line. When reversing, use the bottom edge of the left rearview mirror as a reference. When the two coincide, turn the steering wheel fully to the right and continue reversing. 2. Control the corner point: Watch the right rearview mirror. When you spot the corner point of the garage, pay attention to the changing distance between the corner point and the car body until the car body is parallel to the garage line, then turn the steering wheel back one and a half turns in one go. 3. Align the stopping point: The stopping point is where you stop after entering the garage. The reference method is the same as identifying the starting point. When you see the bottom edge of the left mirror coincide with the shoulder line of the garage, stop the car.
6
0
Share

Can Auto Insurance Cover Hail Damage?

If a vehicle is damaged by hail and has purchased vehicle damage insurance, the owner can file a claim for compensation. Although hail is a natural disaster, it differs from earthquakes and tsunamis. It is a localized disaster not explicitly excluded in insurance contracts, so insurance companies will provide compensation. Below are more relevant details: Notes: 1. Report the incident within 24 hours. After discovering hail damage, the owner should report it to the insurance company within 24 hours; otherwise, the insurer may refuse compensation. However, policies vary among insurers, and larger companies, prioritizing their reputation, may be more lenient with the timeframe. 2. Obtain a weather certificate. When filing a hail damage claim, prepare a weather certificate, such as a hail notice from the meteorological department or local newspaper reports about the hail on the day or the following day. This certificate is necessary for the insurer to process the claim. 3. Document the damage with photos. After hail damage occurs, take photos immediately to preserve evidence, as moving the vehicle or melting hail could complicate matters. Take multiple photos from different angles and keep them securely. 4. Do not move the vehicle or clean up fallen hail. Avoid moving the vehicle or removing hail debris, as this could make it difficult for the insurer to assess the damage and affect evidence collection. 5. Prepare necessary documents. After reporting the claim, the policyholder should have the vehicle owner's ID, original driver's license, original insurance policy, and bank card ready for easy access when needed. Once the damage is assessed, proceed to a repair shop. After the insurer documents the damage, the vehicle can be taken to a nearby repair facility for servicing.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.