···
Log in / Register

How to Turn on the Air Conditioning in a Volkswagen Car?

4 Answers
Garrett
07/23/25 9:28pm
Method to turn on the air conditioning in a Volkswagen car: There are three rotary buttons on the Volkswagen center console. The left button in blue represents cold air, the red one represents warm air, and the middle one represents moderate temperature. To turn on the cold air, adjust the left button towards the blue area; to turn on the warm air, adjust it towards the red area, then press the AC cooling switch. Volkswagen's models include Lavida, Passat, Tiguan L, Tharu, Teramont, and Lamando. Taking the Volkswagen Lamando as an example: its length, width, and height are 4615mm, 1826mm, and 1425mm respectively, with a wheelbase of 2656mm, and it is equipped with a 7-speed dual-clutch transmission.
Was this review help?
17
5
Share
LeClayton
08/10/25 5:10pm
I've been driving a Volkswagen Sagitar for several years, and the air conditioning is really straightforward to use. After starting the car, there's a round knob or touchscreen on the center console—just press the button with the air conditioning symbol. By default, it's in AUTO mode, which automatically adjusts the fan speed and temperature based on the ambient temperature, making it super convenient. I usually set the temperature to 22-23°C, and in summer, I press the MAX button for quick cooling. I often manually adjust the fan speed to avoid excessive noise. A little tip: if the AC doesn’t feel cold enough, the filter might be clogged—it needs cleaning or replacement every year. Also, remember to turn on the external circulation to prevent the cabin from feeling stuffy. In winter, the same system provides warm air—just turn the temperature knob higher. Overall, the design is very practical. Once the AC is on, the ride becomes comfortable, and I’ve never had any issues with daily use.
Was this review help?
1
4
Share
Expand All
DiGenesis
09/23/25 5:02am
The operation of Volkswagen's air conditioning system is quite straightforward. After starting the engine, locate the climate control panel near the instrument cluster. Press the A/C button to activate the compressor. In automatic mode, press AUTO for hands-free operation, or manually adjust the temperature dial to your preferred setting and regulate fan speed. Many overlook this detail: weak battery leads to slower AC activation, so regularly inspect the vehicle's power system as prevention. If buttons remain unlit, first check for blown fuses - a simple replacement suffices. For daily use, moderate temperature settings are recommended to avoid excessive fuel consumption. While the system is reliable, unusual noises or poor cooling may indicate wiring degradation, requiring prompt repair. This exemplifies Volkswagen's strength: intuitive operation without unnecessary complexity.
Was this review help?
9
2
Share
Expand All
Lindsey
11/06/25 7:17am
I got the hang of the Volkswagen's AC in no time. Start the engine, hit the AC button on the center console, and the AUTO mode takes care of fan speed and temperature—super convenient. Manual adjustments are a breeze too; just twist the temperature knob—lower for summer coolness, higher for winter warmth. Key tip: Don’t forget to toggle the air recirculation; it’s a lifesaver for defogging in rainy seasons. My advice? Keep fan speed moderate to avoid noise and save fuel, and clean the filter regularly to prevent odors. Volkswagen’s design is user-friendly—newbies, don’t stress, a few tries and you’ll master it.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

How to Deal with Fuel Line Leakage?

When a vehicle's fuel line is leaking, you must not continue driving to avoid potential safety hazards during operation. After discovering a fuel line leak, immediately seek assistance from professional repair shops or 4S dealerships to promptly address the issue and prevent unnecessary complications.
1
5
Share

How to adjust the throttle cable?

Canned spray-type oil film remover works very well for removing oil film. Just spray for 3 seconds within the wiper's sweeping range to remove the oil film. Remove the cap and press the bottle firmly to spray the liquid. Spray it within the wiper's operating range on the windshield, with a usage method roughly similar to the spray type.
11
1
Share

What to do if the fuel gauge doesn't move after overfilling the tank?

There is a small chip sensor at the very top of the fuel float. It might get dirty due to poor fuel quality, requiring cleaning with an eraser. After removing the instrument panel, use a multimeter and a large needle to locate and test the circuit corresponding to the fuel gauge on the panel. Then proceed with the appropriate repairs.
17
5
Share

How to Use Oil Film Remover?

Thoroughly sand the area that needs repair, then apply glue to the area that needs repair. Use an electric soldering iron to weld the damaged area. First, tilt the oil tank to temporarily stop the oil leak. Wipe the leaking area, apply glue to the leaking area, and wait for the glue to dry.
2
2
Share

How to Stop an Oil Drum Leak?

Thoroughly sand the area that needs repair, then apply glue to the area that needs patching. Use a soldering iron to weld the damaged area. Tilt the oil drum so that the leak stops temporarily. Wipe the leaking area, apply glue to the leak, and wait for the glue to dry completely.
20
5
Share

What to Do When the Fuel Gauge Doesn't Show Fuel Level?

Remove the fuel float from the fuel tank, clean it, repair it, and try again. If it still doesn't work, consider replacing it. The above phenomenon occurs due to poor contact between the main fuel level sensor and the auxiliary fuel level sensor. It is recommended to replace the relevant sensors.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.