How to Turn on the Air Conditioning in a Volkswagen Bora?

1 Answers
LaClayton
07/29/25 10:07pm
To turn on the air conditioning in a Volkswagen Bora, press the AC button in the air conditioning control area to activate the compressor for cooling. Once turned on, cool air will be emitted. The car air conditioning system is designed to regulate and control the temperature, humidity, air cleanliness, and airflow within the vehicle cabin to an optimal state, providing a comfortable environment for passengers and reducing travel fatigue. Taking the 2021 Volkswagen Bora as an example, its body dimensions are: length 4663 mm, width 1815 mm, height 1462 mm, wheelbase 2688 mm, fuel tank capacity 50 liters, trunk capacity 506 liters, and curb weight 1320 kg.
Was this review help?
6
2
Share
More Forum Discussions

Which way to turn the steering wheel when the left side is narrow during reverse parking?

Turn right. If the left side is narrow and the right side is wide during reverse parking, adjust by turning the steering wheel to the right. Conversely, if the left side is wide and the right side is narrow, turn the steering wheel to the left to correct it. In short, turn the steering wheel towards the wider side to adjust. Below is additional information on common reverse parking methods: "Non"-shaped reverse parking, commonly seen in large shopping malls. For "non-shaped" reverse parking, the vehicle should be perpendicular to the target parking space, with the B-pillar of your vehicle as a reference point. Using the first parking space as a reference, you can generally reverse into the third parking space. Roadside "line"-shaped reverse parking, commonly known as parallel parking. For "line-shaped" parallel parking, use the car in front as a reference, align the body, turn the steering wheel to the right, and observe. When the angle between the two cars reaches 45 degrees, straighten the steering wheel and reverse. If estimated correctly, you can complete the parking in one go. Diagonal reverse parking, also known as diagonal or irregular parking.
20
1
Share

What is the speed limit on the Baomao Expressway?

The speed limit at 1051 kilometers and 923 meters on the Baomao Expressway is 100 km/h for small vehicles and 80 km/h for large and medium-sized vehicles. The Baomao Expressway is located in Hanbin District, Ankang City, Shaanxi Province, north of the Cigou Exit (Cigou Toll Station). Below is more related information: Maximum speed: Expressways should indicate the driving speed of lanes, with the maximum speed not exceeding 120 km/h and the minimum speed not lower than 60 km/h. On expressways, the maximum speed for small passenger vehicles should not exceed 120 km/h, other motor vehicles should not exceed 100 km/h, and motorcycles should not exceed 80 km/h. Minimum speed: According to the "Regulations for the Implementation of the Road Traffic Safety Law," if there are 2 lanes in the same direction, the minimum speed for the left lane is 100 km/h; if there are 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h. If the speed indicated by road speed limit signs is inconsistent with the above lane speed regulations, drive according to the speed indicated by the road speed limit signs.
12
1
Share

Will removing the 3C mark on a car result in penalties?

The 3C mark can be removed without affecting future maintenance, repairs, or daily driving. However, the vehicle must display the annual inspection compliance mark and the compulsory insurance mark. The 3C mark is China's mandatory certification mark, which serves to protect national interests and prevent property losses while also regulating the quality issues of foreign manufacturers and brands. Below are the marks required to be displayed on vehicles for road use: 1. Annual Inspection Compliance Mark: According to Chinese law, vehicles must undergo annual inspections on time. Newly purchased vehicles are exempt from inspection for the first six years, but owners must still collect the annual inspection compliance mark from the vehicle management office or relevant institutions each year. Vehicles that fail to display the annual inspection compliance mark may be fined or even impounded by traffic authorities. During the exemption period, submitting proof of compulsory insurance and other materials is required to obtain the compliance mark. 2. Compulsory Insurance Mark: Compulsory insurance must be purchased when acquiring a vehicle. Without compulsory insurance, the owner assumes full responsibility for any accidents, covering all associated costs personally. Vehicles without compulsory insurance are not permitted on the road. If stopped by traffic police, the vehicle may be impounded, and the owner may face a fine equivalent to twice the compulsory insurance premium.
19
3
Share

How many liters does it take to fill up a Land Cruiser's fuel tank?

The fuel tank capacity of the Land Cruiser is 138 liters, as officially announced. The Land Cruiser requires 95-octane gasoline, with a fuel consumption of 13.6-14.7L per 100 kilometers. A full tank can cover a distance of 939-1015 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
11
1
Share

Does Speeding at the Start or End Point of Section Speed Measurement Count?

Speeding at the start or end point of section speed measurement does not count. Below is relevant information about section speed measurement: Reasons why speeding at the start or end point of section speed measurement does not count: Section speed measurement calculates the average speed from the start to the end point based on the time taken. If the time taken is less than the stipulated time, it is considered speeding; exceeding the time does not count as speeding. The principle is based on calculating the vehicle's average speed over the section by measuring the time it takes to pass between two monitoring points, and determining whether the vehicle has violated the speed limit based on the speed limit for that section. Precautions for beginners passing through highway section speed measurement: For beginners driving on the highway, there must be a driver with a license for at least 3 years or more sitting in the passenger seat; even with a license and an experienced driver accompanying, it is necessary to check the vehicle's condition, such as fuel level, tire pressure, brakes, etc., to ensure everything is normal. Most importantly, check if there are any issues with the tires. The maximum speed limit on domestic highways is 120km/h, and drivers must adhere to the speed limit indicated by road signs. When changing lanes on the highway, also be cautious: each lane change should only involve one lane at a time, and continuous changes across two lanes are not allowed. Additionally, remember that the emergency lane must not be occupied under non-emergency circumstances (including stopping and driving).
3
2
Share

How to Clean Tar Stains from a Car?

There are two methods to clean tar stains from a car: 1. Car Wax: The oil content in the wax can dissolve the tar in the asphalt. By repeatedly applying car wax, the asphalt stuck on the car body can usually be removed. After wiping off the asphalt, use a clean cloth to wipe once more to completely remove any tar residue left on the car body. 2. Tar Remover: This cleaning agent can quickly dissolve and remove tar, asphalt, and other dirt from the car surface, offering significant cleaning, stain removal, and polishing effects. However, this cleaner is somewhat corrosive, so it must be thoroughly washed off after application.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.