How to Turn on the Air Conditioning in a Geely Emgrand?

1 Answers
LeRose
07/30/25 12:05am
Method to activate the air conditioning in a Geely Emgrand: 1. After turning on the air conditioning system, the LCD display area will show the temperature setting. The AUTO button represents automatic climate control—pressing it enables automatic temperature regulation; 2. The knob on the right adjusts the temperature—turning it clockwise increases the temperature, while turning it counterclockwise decreases it. The knob on the left controls the fan speed; 3. The MODE button manages the vent positions on the dashboard, and the air conditioning panel also allows switching between internal and external air circulation; 4. To turn off the air conditioning, simply press the OFF button. In terms of exterior design, the Emgrand EC7 has undergone a series of upgrades, including minor modifications to the grille, the addition of sportier blackened headlights, and the replacement of fog lights with LED daytime running lights. For the interior, the new Emgrand EC7 features an optional beige color scheme while maintaining the overall design of the previous model.
Was this review help?
20
4
Share
More Forum Discussions

How Much Horsepower Does the Mistra 1.8L Have?

The maximum horsepower of the Mistra 1.8L model's engine is 143 hp, and the engine is paired with a CVT transmission. Below is more information about the Mistra: The Mistra 1.8L model has relatively low fuel consumption. This is because the 1.8L Mistra offers four driving modes: ECO, COMFORT, SPORT, and SMART. Except when in Sport mode, the engine speed drops quickly and remains low, resulting in smooth driving and reduced fuel consumption. The Mistra 1.8L is equipped with the Hyundai SmartSense system, featuring 23 ADAS configurations. Its adaptive cruise control is highly intelligent, and the lane centering assist function is robust with comfortable and natural corrective torque. Additionally, the FCA-JT automatic emergency braking system with 'intelligent deceleration' capability provides high safety performance.
8
0
Share

Why does the Audi Q5 not respond when starting?

Audi Q5 not responding when starting is most likely caused by a dead vehicle battery. You can use an emergency power source or jump-start the vehicle to start it. After starting, relying solely on the car's generator to charge the battery may not be sufficient, leading to insufficient stored power and the inability to start the engine. Here are some related introductions about the battery: 1. Introduction One: The battery is an essential part of a car and can be divided into traditional lead-acid batteries and maintenance-free batteries. Since the battery uses lead-calcium alloy for the grid frame, the amount of water decomposed during charging is less, and the evaporation of water is also low. Additionally, the sealed structure of the casing releases very little sulfuric acid gas. Therefore, compared to traditional batteries, it has advantages such as not needing to add any liquid, easy connection to terminals, and long-term power storage. 2. Introduction Two: The designed lifespan of a battery is 27 months. Many new car batteries for general household use can last 3 to 4 years, and after replacement, they usually need to be replaced again in about 2 years. Factors affecting the battery's lifespan include the condition of the car, road conditions, and the driver's habits.
13
2
Share

What are the reasons for weak airflow from the BMW 3 Series air vents?

BMW 3 Series air vents have weak airflow for the following reasons: 1. Incorrect air direction setting: If the air vent direction is set to blow toward the windshield, the airflow will noticeably decrease. 2. Blower motor malfunction: Common blower motor issues include failure to operate, abnormal noise, short circuits, or insufficient power. When the blower motor malfunctions, cold air from the vehicle's air conditioning evaporator cannot be distributed, leading to evaporator icing and ultimately affecting the normal operation of the car's air conditioning system. 3. Condenser or evaporator blockage: If the condenser's exterior or evaporator is clogged with debris such as willow catkins or dust, the condensation efficiency will decline, ultimately affecting the car's cooling performance. Excessive dirt buildup on the evaporator surface can also significantly reduce the air conditioning's cooling effectiveness. 4. Dirty air conditioning filter: If the car's air conditioning filter is excessively dirty, airflow from the vents can be obstructed, allowing only a portion of the air to enter the cabin. As a result, the airflow will feel noticeably weaker.
20
0
Share

Where is the OBD interface of BAIC M20?

It is located inside the trim panel below the steering wheel, near the driver's knee area. Relevant information about OBD is as follows: 1. Introduction One: OBD is an On-Board Diagnostics system. This system can monitor the working conditions of the engine's electronic control system and other functional modules of the vehicle in real-time during operation. If any abnormal conditions are detected, it will determine the specific fault according to specific algorithms and store it in the system's memory in the form of diagnostic trouble codes. 2. Introduction Two: The useful information obtained from the system's self-diagnosis can assist in vehicle maintenance and repair. Technicians can use the vehicle's original specialized equipment to read the fault codes, thereby quickly locating the fault for vehicle repair and reducing the time required for manual diagnosis. 3. Introduction Three: As a system for monitoring exhaust emissions, OBD has gradually expanded its control scope in later developments. With the improvement of various vehicle sensors and the degree of electronicization, OBD has incorporated various monitoring functions into its jurisdiction.
9
2
Share

What happens to the Raptor after 15 years?

The Raptor must be mandatorily scrapped after 15 years. Reasons are as follows: 1. Type: Raptor series models are classified as light-duty ordinary trucks. 2. Scrapping extension: An extension can be applied for, with biannual inspections, up to a maximum of 15 years before mandatory scrapping. Additional information: Vehicle scrapping timelines are as follows: 1. Non-commercial passenger vehicles with 9 seats or fewer (including sedans and off-road models): 15 years of use. If continued use is desired after reaching scrapping standards, no approval is required. After passing inspection, the service life can be extended with biannual inspections. Beyond 20 years, from the 21st year onward, quarterly inspections are required. 2. Passenger vehicles: Tourist passenger vehicles and non-commercial passenger vehicles with more than 9 seats have a 10-year use period. Continued use after reaching scrapping standards follows current procedures, with a maximum extension of up to 10 years. Tourist passenger vehicles under extended use require quarterly inspections, while non-commercial passenger vehicles with more than 9 seats require biannual inspections, increasing to quarterly inspections from the 16th year onward if used beyond 15 years. 3. Commercial large buses: The use period is adjusted to 10 years. Continued use after reaching scrapping standards follows current procedures, with a maximum extension of up to 4 years, during which quarterly inspections are required.
17
3
Share

How Often Should BMW Engine Mounts Be Replaced?

Engine mounts are generally replaced every 100,000 kilometers. The signs of damaged engine mount cushions are as follows: 1. Sign One: Damaged engine mount cushions can transmit engine vibrations to the car, making the steering wheel feel shaky, reducing driving comfort, and causing abnormal noises during driving. 2. Sign Two: The rubber cushions serve to secure the engine and buffer its vibrations during driving. If the engine shakes when starting the car cold and shifting into reverse, or if the engine shakes when driving over certain bumpy roads, it indicates that the rubber cushions need to be replaced. 3. Sign Three: Upon inspection of the removed rubber cushions, it will be found that the rubber has separated from the metal connections, losing its ability to buffer the engine's vibrations. Over time, this can cause the engine's bolts and components to loosen due to vibration, posing a driving hazard.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.