How to Turn on the Air Conditioning in a Camry?

1 Answers
DeMadelyn
07/25/25 12:22am
The method to turn on the air conditioning in a Camry: The air conditioning control area is located in the middle of the center console. The blue button on the left side of the car represents cold air, the red button represents warm air, and the middle one represents moderate temperature. To turn on the cold air, adjust the button towards the blue side; to turn on the warm air, adjust it towards the red side, and then press the AC switch. The middle button can control the fan speed and adjust the mode. The Camry has a length, width, and height of 4885mm, 1840mm, and 1455mm respectively, with a wheelbase of 2825mm. The car is equipped with an engine that has a maximum power of 131kw and a maximum torque of 210nm. The driving method of the car is front-wheel drive.
Was this review help?
12
3
Share
More Forum Discussions

How to Activate the One-Touch Window Lift Hidden Feature in CRV?

Press and hold the lock button on the remote key to lift all windows with one touch, and press and hold the unlock button on the remote key to lower all windows with one touch. Below is some relevant information about the CRV: 1. The CRV is a compact SUV under Honda, which has excellent sales and reputation in China, and also maintains a high resale value in the used car market. 2. The new CRV is equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter naturally aspirated engine. The 1.5-liter turbocharged engine, codenamed L15BL, has a maximum power of 142 kW, a maximum torque of 243 Nm, a maximum power speed of 5600 rpm, and a maximum torque speed ranging from 2000 to 5000 rpm. This engine features VTEC technology and uses an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a CVT transmission.
7
0
Share

What is the fuel tank capacity of the Audi Q5?

The fuel tank capacity of the Audi Q5 is 75 liters. Among them, the 2013 model has a fuel tank capacity of 75-72 liters, the 2012 model has a capacity of 72 liters, and the 2010 model has a capacity of 75 liters. The maintenance of the fuel tank is as follows: Drain accumulated water and sediment from the fuel tank, and check for any oil leakage at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and vapor valves, also check if the vent holes are clear. The filter screen at the fuel filler neck should be kept intact to prevent impurities from entering the fuel tank during refueling, which could clog the fuel lines. The sealing gasket on the fuel filler cap should also be intact to prevent fuel from spilling out while driving. If the owner wants to know the remaining fuel level in the tank, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is close to E, it indicates that the fuel is almost empty, and when it is near F, it means the fuel level is sufficient.
20
1
Share

How to Adjust the Equalizer on the 10th Generation Civic?

The 10th generation Civic does not come standard with a 7-inch touchscreen LCD display across all models. The audio equalizer can be accessed through the central control screen. By entering the sound quality adjustment interface, you can adjust various parameters of the audio equalizer. The adjustment method is as follows: 1. On the 10th generation Civic, press the HOME button on the central control screen—select Audio—then click the MENU function key. At this point, you will see the sound quality adjustment option at the bottom of the multimedia central control screen. 2. Select and enter the sound quality adjustment option to adjust the equalizer, such as bass, midrange, and treble settings, sound balance, and the volume-speed linkage function. Adjusting the bass by two notches, setting the midrange to maximum, and increasing the treble by three notches can effectively enhance the audio quality.
18
3
Share

What are the symptoms of a faulty EGR valve in Wuling Rongguang?

The most obvious phenomenon of a faulty EGR valve in Wuling Rongguang is that it will make the engine idle extremely unstable or even stall. Here is some relevant information about EGR: 1. The EGR valve is the valve of the exhaust gas recirculation control system. A faulty EGR valve may cause symptoms such as extremely unstable idling or stalling, flashing fault lights, failure to meet annual emission inspection standards, burning engine oil, and blue smoke from the exhaust. The EGR valve is a very important and critical component in the exhaust gas recirculation device. 2. The EGR valve is a mechatronic product installed on diesel engines to control the amount of exhaust gas recirculated back to the intake system. It is usually located on the right side of the intake manifold, near the throttle body, and is connected to the exhaust manifold by a short metal pipe. Its function is to control the amount of exhaust gas entering the intake manifold, allowing a certain amount of exhaust gas to flow into the intake manifold for recirculation. The EGR valve is a very important and critical component in the exhaust gas recirculation device, used to reduce the emission of nitrogen oxides (NOX) in the exhaust gas.
19
1
Share

What is the ground clearance of the Skoda Octavia Combi?

The minimum ground clearance of the Octavia Combi is 150mm when unloaded and 125mm when fully loaded. For the domestically produced Octavia Combi, the minimum ground clearance is 145mm when unloaded and 120mm when fully loaded. Here is some relevant information about the Octavia: 1. The new generation Octavia is produced on Volkswagen Group's new transverse modular platform MQB chassis. In terms of exterior dimensions, the car length reaches 4659mm, the width is 1814mm (45mm wider than the current model), and the wheelbase reaches 2686mm (108mm longer than the current model). 2. The larger body size also provides a larger trunk volume. With the help of the large-opening luggage compartment, the trunk volume of the model reaches 590 liters, which is a full 30 liters more than the current model.
3
0
Share

What are the causes of engine abnormal noise in Geely New Vision?

Most common abnormal noises in the engine depend on the engine's speed state. Below are the relevant introductions about abnormal noises: 1. The noise only exists during idle or low-speed operation. Possible causes include: excessive clearance between the piston and cylinder wall; overly tight piston pin or connecting rod bearing assembly; excessive clearance between the tappet and its guide hole; wear of the camshaft profile; sometimes, a loose starter clutch causing pulley noise (more noticeable during speed changes). 2. The noise becomes chaotic at a certain speed, and short noises are emitted successively during rapid deceleration. Possible causes include: cracked camshaft timing gear or loose fixing nut; broken crankshaft; loose piston pin bushing; excessive axial clearance of the camshaft or loose bushing. 3. The noise appears during rapid acceleration of the engine and persists during high-speed operation. Possible causes include: loose connecting rod bearings, melted or mismatched bearing shells causing rotation; loose crankshaft bearings or melted bearing shells; broken piston pin; broken crankshaft.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.