How to Turn on the Air Conditioning in a BMW 5 Series?

1 Answers
ElizabethAnn
07/24/25 7:51pm
BMW 5 Series air conditioning can be turned on as follows: 1. First, press the AUTO button to enter full automatic mode. 2. Rotate the knob to set the temperature twice, and the air conditioning will automatically adjust the fan speed and air circulation mode to reach the set temperature inside the car. The four functions of modern car air conditioning are as follows: 1. The air conditioner can control the temperature inside the cabin, heating or cooling the air to maintain a comfortable level; 2. The air conditioner can remove moisture from the air, drying it to absorb human sweat and create a more comfortable environment; 3. The air conditioner can intake fresh air, providing ventilation; 4. The air conditioner can filter the air, removing dust and pollen.
Was this review help?
3
0
Share
More Forum Discussions

What is the fuel consumption per 100 kilometers for a 2.4L displacement older car?

A 2.4L displacement car typically consumes around 10.5 liters of fuel per 100 kilometers. The fuel consumption of a car is not only related to the vehicle itself but also depends on the driver's habits and road conditions. The main factors affecting fuel consumption are as follows: 1. Vehicle-related reasons: As an internal control unit in the car, the oxygen sensor primarily monitors the air-fuel ratio of the engine. Once it is damaged, it will cause an imbalance in the air-fuel ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gases during driving. 2. Long overdue replacement of the "three filters": During vehicle use, the three filters (oil filter, air filter, and fuel filter) must be replaced regularly. If they are not replaced for a long time, they will become dirty and affect performance, sending incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits.
8
4
Share

How to Repair the Electronic Steering Gear Failure in BMW 3 Series?

To repair the electronic steering gear failure in BMW 3 Series, it is necessary to use a computer to read the fault codes of the electronic steering gear. If the fault is identified as a steering gear failure, the steering gear should be directly replaced and reprogrammed. The following are the specific causes of electronic steering gear failures: 1. Excessive Air: A large amount of air in the power steering system can cause abnormal car steering. 2. Presence of Foreign Objects: Foreign objects in the steering hydraulic pipeline can cause the steering pump flow control valve to stick. 3. Loose Connections: Loose connections in the power steering system can lead to steering fluid leakage. 4. Piston Cylinder Wear: Excessive wear of the steering gear piston cylinder, poor sealing of the oil seal, or sticking/damage of the control valve.
17
3
Share

How often should a car over 10 years old undergo annual inspection?

Cars over 10 years old must undergo annual inspection once every year. Introduction: Annual inspection, also known as 'annual examination'. Purpose: Vehicle annual inspection (or car annual inspection) refers to the annual examination of vehicles that have already obtained official license plates and registration certificates, conducted in accordance with the 'Technical Conditions for Motor Vehicle Operation Safety'. Content: The purpose is to inspect the main technical conditions of the vehicle, encourage enhanced maintenance and upkeep, ensure the vehicle is always in good condition, and guarantee driving safety. Timing: Vehicles can apply for annual inspection within 3 months prior to the inspection date. It is best to apply two months or more in advance, rather than waiting until there are only a few days left before the inspection deadline.
15
3
Share

What are the steps to start an Envision?

The steps to start an Envision are: first press the brake, then press the ignition button to start the engine. Wait for the vehicle to complete self-inspection and warm up, then shift to D or R gear. Release the electronic parking brake and foot brake, and press the accelerator to drive. Taking the 2021 Envision as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4694mm in length, 1839mm in width, and 1686mm in height. It has a wheelbase of 2750mm, a fuel tank capacity of 68 liters, and a curb weight of 1610kg. The 2021 Envision is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169PS, a maximum power of 124kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
10
4
Share

How to Replace the Vehicle Environmental Protection List?

Environmental protection list must be re-obtained through exhaust emission testing. If the compulsory traffic insurance label is lost, it cannot be reissued, but carrying the compulsory traffic insurance policy in the vehicle is sufficient. Below is additional information: 1. Notes: The vehicle environmental protection information list is one of the essential documents for motor vehicles and serves as an important certificate for the vehicle's environmental emission standards. The public can scan the anti-counterfeiting code (unique) in the upper right corner of the vehicle environmental protection information list with a mobile phone to verify the vehicle's emission stage and other environmental details, ensuring the information is accurate and consistent. Therefore, do not lose the vehicle environmental protection information list. 2. Proof: When applying for the "Motor Vehicle Environmental Compliance Model Certification," in addition to carrying the vehicle owner's identity proof, "Goods Import Certificate," "Inspection Certificate for Imported Motor Vehicles," "Unified Invoice for Motor Vehicle Sales Registration," "Vehicle Conformity Certificate," and photos of the nameplate, the vehicle environmental protection information list must also be provided, and the information must be verified as valid before processing.
18
3
Share

Is the Accord compliant with China VI emission standards?

The Accord does not fully comply with China VI standards across all models, but there are China VI-compliant versions available. Below are the details of the China VI-compliant Accord models and their body dimensions: China VI-compliant Accord models: The 2018 260TURBO model already includes vehicles that meet the China VI standards, including the 2018 Sharp Hybrid 2.0L displacement models, which also comply with China VI. Accord body dimensions: The Accord's body dimensions are 4882mm in length, 1862mm in width, and 1451mm in height, with a wheelbase of 2830mm. The Accord is equipped with a 1.5L four-cylinder engine and a 2.0L turbocharged inline four-cylinder engine, with maximum outputs of 192 horsepower and 252 horsepower, and peak torques of 260 Nm and 370 Nm, respectively. Additionally, there is a hybrid model featuring a 2.0L VTEC engine paired with an electric motor, matched with a 10AT transmission.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.