How to Turn on the Air Conditioning in a BAIC New Energy Vehicle?

Where is the PCV valve installed?

PCV valve installation location: A pipe from the engine valve cover connects to the engine intake pipe. The arrangement of the PCV hose varies depending on the engine model. Below is relevant information about the PCV valve: 1. Function of the PCV valve: At the end of the engine combustion process, some unburned mixture leaks into the crankcase under high pressure from the piston rings. These blow-by gases can escape into the atmosphere, causing pollution. If these gases are not removed, they can dilute the engine oil in the crankcase, leading to oil degradation and premature wear of engine components. Therefore, a PCV valve is installed on the valve cover to allow these exhaust gases to re-enter the engine through the intake manifold for re-combustion. 2. PCV valve inspection method: After reinstalling the PCV valve, remove the crankcase intake pipe from the air filter and lightly cover the pipe opening with a thin piece of paper. As the pressure in the crankcase decreases, the paper should be noticeably sucked toward the pipe opening. Additionally, after stopping the engine, remove the PCV valve and shake it by hand to check. If a "click" sound is heard, it indicates that the PCV valve is flexible and usable.

19

1

Share

How much gear oil should be added to the ConMet front wheel?

ConMet front wheel requires 900 to 1000 milliliters of gear oil, approximately equal to 1.8 pounds. The assembly quantity of gear oil has strict requirements: ConMet's steering axle hub is equipped with a visual window, allowing observation of excessive, insufficient, or deteriorated lubricating oil through the window. Additionally, this window features multiple exhaust holes to maintain consistent internal and external air pressure at all times. If oil stains are found near the exhaust holes, it indicates that the wheel has undergone frequent thermal expansion and contraction processes, requiring further inspection of the brakes, providing a certain degree of brake system warning function. Reasons for the higher price: The oil-lubricated ConMet hub is 30% more expensive than ordinary hubs, but due to its 500,000-kilometer maintenance-free feature, it eliminates the need for periodic maintenance costs associated with traditional hubs.

7

3

Share

Is Wheel Rim Out-of-Round Repair Durable?

Wheel rim out-of-round repair is neither durable nor safe. There are safety hazards after repairing a deformed wheel rim: Abroad, there are relatively mature technologies for repairing out-of-round aluminum alloy rims, which involve heating the rim and placing it back into a mold for restoration. However, it is understood that such technology has not yet been introduced in China. Therefore, if a wheel rim is already out-of-round, it is not recommended to repair it, as the repair can still affect driving safety. Wheel Rim Materials: Modern car wheel rims can be divided into aluminum alloy rims, steel rims, and carbon fiber rims based on material. Currently, the vast majority of models use aluminum alloy rims, a small number of low-end models use steel rims, and some supercars use carbon fiber rims. In fact, in early cars, all wheel rims used were steel rims, but steel rims have a significant drawback: they are prone to deformation and becoming out-of-round.

6

5

Share

What is the fuel consumption per 100 kilometers for the CFMOTO 800MT?

CFMOTO 800MT fuel consumption is approximately 5 liters per 100 kilometers. CFMOTO 800MT exterior configuration: The CFMOTO 800MT will be divided into two versions, the S Sport version and the T Touring version. There are many differences in configuration between the two versions, including differences in appearance such as wheels, engine guards, handguards, etc. Both versions offer the option of with or without side cases. Other highlights of the CFMOTO 800MT: The CFMOTO 800MT has many highlights and selling points, such as the LC8C power platform provided by KTM, electronic throttle, IMU, cornering ABS, cruise control, quick shifter, integrated heated handlebars and seat, etc. Especially, the 95 horsepower gives it an advantage among products in the same class.

8

5

Share

Does Installing ETC in the Black Dot Area Affect Its Usage?

The ETC device can be installed on the black dot area of the windshield without affecting its functionality. As long as it does not obstruct the driver's view and can detect the toll station's equipment, it will work fine. However, installing it on the black dot area has a drawback: the solar charging capability of the ETC device may weaken, potentially leading to power loss over time. For small cars, the recommended ETC installation position is generally in the upper middle part of the front windshield, while for large vehicles like trucks and buses, it should be installed in the lower middle section. The ideal installation height is between 1.2 meters and 2.5 meters, with an angle ranging from 30 to 90 degrees. If the vehicle has or will have anti-explosion film, which can interfere with microwave signal transmission, the ETC should be installed in the microwave window strip. Here are some key considerations for ETC installation: 1. Avoid obstructing the driver's view: The best position is behind the rearview mirror. Many car models have windshields with a steep incline, which can reduce the driver's field of vision. Installing the ETC behind the rearview mirror on the right side helps minimize blind spots. 2. Ensure proper charging: The ETC tag consumes power but typically doesn't require manual charging or battery replacement, as it has a built-in solar panel. Therefore, avoid installing it on the black dot area or any location that might block the solar panel. 3. Do not remove the device once installed: The adhesive includes an anti-tamper switch. If the device is removed, the switch will trigger, locking the ETC tag and requiring an unlock at an ETC service point. This feature prevents multiple vehicles from sharing one device. ETC usage tips: - The ETC transaction sensing range is 8 meters. To avoid paying for the vehicle ahead due to its faulty ETC device, maintain a distance of at least 10 meters from the car in front. - The ETC lane recognizes vehicles at speeds up to 20 km/h. Driving faster may result in failed transactions. - If using a debit card linked to ETC, insufficient balance can also cause transaction failures.

18

0

Share

The Function of Car Floor Mats?

Car floor mats have effects such as dustproof and water absorption. Dustproof function: Car floor mats are also a type of interior decoration that not only protects the cleanliness inside the car but also adds an aesthetic effect. Therefore, when choosing car floor mats, the pattern, comfort, and visual appeal are all very important. Water absorption function: Car floor mats can absorb water and dust, effectively absorbing residual moisture from underfoot. They also provide an anti-slip effect between the brake and accelerator, helping to prevent many accidents. Additionally, they are very convenient to clean. Choosing thick floor mat materials can also effectively block some noise from the chassis and tires, thereby improving comfort to a certain extent. Floor mat materials: When selecting floor mats, the biggest advantage of linen mats is their very affordable price, but the biggest drawback is their lack of durability and softness, which can lead to deformation after a few washes. PVC mats are easy to clean and have a decent appearance, but their biggest disadvantage is that they become very hard in winter, and the materials used in some products cannot be controlled, resulting in a stronger odor. Leather mats are very easy to clean, but their biggest drawbacks are their inability to absorb water or dust and their poor sound insulation effect.

20

5

Share

How to Turn on the Air Conditioning in a BAIC New Energy Vehicle?

Where is the PCV valve installed?

How much gear oil should be added to the ConMet front wheel?

Is Wheel Rim Out-of-Round Repair Durable?

What is the fuel consumption per 100 kilometers for the CFMOTO 800MT?

Does Installing ETC in the Black Dot Area Affect Its Usage?

The Function of Car Floor Mats?

Is there any penalty for speeding less than 10%?

What are the configurations of the 2018 DS4S?

What is the Function and Principle of a Motorcycle Relay?

What Causes the Steering Wheel to Shake and the Key to Not Turn?