How to Turn on the Air Conditioning Cooling in the Lamando?

3 Answers
KadenMarie
07/29/25 12:05pm
To turn on the air conditioning cooling in the Volkswagen Lamando: Press the A/C button, turn on the fan switch, rotate the temperature control knob to the blue side for cold air, adjust the fan speed, and set the temperature. The car air conditioning system can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety. Below are the reasons why the air conditioning may not cool: 1. Refrigerant leakage, manifested by both the indoor and outdoor units working, the compressor running, but no cooling effect. 2. Damage or malfunction of the compressor capacitor, causing the compressor to stop working. Manifested by both the indoor and outdoor units working, but the compressor not rotating and overheating. 3. Change in resistance value of the room temperature sensor, causing the outdoor unit to stop working. The phenomenon is similar to the air conditioning shutting off after reaching the set temperature. 4. Malfunction of the remote control or the air conditioning receiver. Manifested by the air conditioning not responding when turned on or working intermittently. 5. Four-way valve (not applicable to single-cooling units) or high-low pressure gas leakage in the compressor, manifested by the air conditioning running but with no cooling effect.
Was this review help?
19
0
Share
DerekLee
08/13/25 10:01pm
I've been driving the Lamando for several years, and the cooling operation is quite simple. First, start the engine and wait for the car to warm up before operating the air conditioning panel. Find the A/C button with the small blue light indicator, press it, and it will light up, which activates the compressor to start cooling. Then, turn the temperature knob to a lower number, such as around 18 degrees, until it feels cool enough. Adjust the fan speed button to medium to allow faster air circulation inside the car for quicker cooling. If it's too hot when you first get in the car during summer, it's recommended to open the windows for ventilation for about ten seconds before closing them and turning on the air conditioning. This improves cooling efficiency and reduces the burden on the car. Remember to regularly maintain the air conditioning system, as a dirty filter can affect its performance.
Was this review help?
10
3
Share
Expand All
VonMelanie
10/08/25 8:24am
For those who frequently interact with vehicles, activating the Lingdu's cooling function is straightforward. After starting the car, press the button marked A/C in the air conditioning control area; once it's activated, turn the temperature knob to lower the set temperature. Be careful not to set it too cold initially to avoid catching a cold due to a large temperature difference. Also, check if the cooling is functioning properly—if there's an unusual odor or insufficient cooling, it might indicate low refrigerant levels or a compressor issue, requiring professional inspection. It's recommended to check the air conditioning filter every season to prevent dust blockage, which can affect performance and cabin air quality, ensuring a fresh driving environment.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

How long after the vehicle inspection can it be checked on 12123?

It can be checked on 12123 72 hours after the vehicle inspection. Introduction to vehicle inspection: The traffic police department conducts an annual inspection of the vehicle's condition and performance, also known as the annual inspection. New vehicles are inspected every two years. Contents of the vehicle inspection: Check whether the engine, chassis, body, and auxiliary equipment are clean, complete, and effective, whether the paint surface is uniform and aesthetically pleasing, and whether the main assemblies have been replaced. Verify whether it matches the initial inspection record; Check whether the vehicle's braking performance, steering control, lighting, exhaust, and other safety performance meet the technical requirements for safe operation of motor vehicles; Check whether the vehicle has been modified, remodeled, or transformed, whether the driving license, license plate, and vehicle file records match the current vehicle condition, whether there are any changes, whether approval and modification procedures have been completed, and whether the license plate, driving license, and enlarged license plate markings on the vehicle are damaged, altered, or unclear, and whether they need to be replaced.
8
0
Share

What is the HOLD light?

HOLD light is the gear lock indicator light. When the HOLD light is on, it indicates that the gear is locked in a specific position. When driving uphill or on icy/snowy roads that require low-gear operation, you can activate HOLD to lock the transmission in second gear. The button for this switch is located in the middle of the gear lever. Pressing it again will deactivate the function. Normally, it's not recommended to use this feature as it may harm the transmission. Automatic gear lock is a forced downshift key, used when gears get stuck or during towing. When HOLD is activated, the parking brake system will automatically engage each time the vehicle comes to a complete stop after braking. You'll feel a release of pressure on the brake pedal, at which point you can release the pedal without worrying about the vehicle rolling. Working principle of gear lock indicator light: The transmission control unit uses this sensor to detect the gear selected by the driver and performs corresponding control actions. Relationship between neutral switch and gear position switch: In older vehicles, the P (Park) and N (Neutral) switches were connected in series with the starter motor switch, meaning the engine could only be started in these two positions. In newer vehicles, the control unit identifies the neutral signal first, then decides whether to engage the starter motor.
11
5
Share

What brand is the Rolls-Royce engine?

Rolls-Royce's engine is from the BMW brand. Here is some information about Rolls-Royce: 1. Rolls-Royce is a world-renowned ultra-luxury car manufacturer, founded in the UK by Frederick Henry Royce (Henry Royce) and Charles Stewart Rolls (Charles Rolls). 2. The cars produced by Rolls-Royce are outstanding representatives of top-tier automobiles, renowned globally for their luxury.
1
3
Share

What Causes Engine Shaking When Warm?

Here are the specific reasons for engine shaking during warm idle: 1. Fuel system issues: Typically caused by fuel line blockages leading to poor fuel supply, manifested as engine shaking, unstable idle, or stalling while driving. Fuel pump failure can also cause engine shaking. To diagnose fuel pump problems, disconnect the fuel line and check fuel flow rate and volume. 2. Electrical system issues: Check whether spark plugs are worn, if gaps are uniform, or if gaps have changed. Additionally, malfunctioning distributors can cause engine shaking. 3. Mechanical reasons: Inspect engine operation for abnormal sounds or valve noise. Check belt condition for looseness.
1
3
Share

What Causes Difficulty in Removing the Car Key?

Car key difficulty in removal can be attributed to the following reasons: 1. P gear not properly engaged: When exiting the vehicle, the gear was not shifted to P or the P gear did not fully engage, possibly obstructed by an object, thus failing to trigger the electronic sensor. 2. Steering wheel locked: The steering wheel was not returned to its proper position when parking, causing an abnormal lock. The solution is to insert the key, attempt to turn the steering wheel left and right while twisting the key, which will release the steering wheel lock. 3. Obstruction in the key slot: The solution involves removing the obstruction, starting the car, shifting the gear again to ensure it is fully engaged, after which the key can be removed.
16
1
Share

What are the items for secondary vehicle maintenance?

There are four main items for secondary vehicle maintenance: engine, clutch, tires, and overall vehicle inspection. Below is a detailed introduction to vehicle maintenance: 1. Overview: Vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. Currently, vehicle maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 2. Purpose: The goal of vehicle maintenance is to keep the vehicle clean and in good technical condition, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.