How to turn on the air conditioning cooling in the GAC GS4?
5 Answers
The method to turn on the cold air in the GAC GS4 is to press the AUTO button to turn on the air conditioning, then press the A/C button to activate the cooling, and finally adjust the knob to set the temperature. Below is an introduction to the GAC GS4 air conditioning buttons: 1. OFF button: Used to turn off the air conditioning system. 2. Temperature increase button: Used to raise the desired interior temperature. 3. Fan speed increase button: Used to manually increase the blower speed setting. 4. MODE button: Allows selection of the airflow direction from the vents, with adjustments displayed on the screen. 5. Recirculation button: Turns the air recirculation mode on or off. 6. A/C button: Used to activate the air conditioning cooling system.
Turning on the air conditioning for cooling is actually quite simple, and I often operate my GS4 this way. First, start the car to let the engine run, as the AC won't work otherwise. Then, locate the AC panel on the center console, which usually has an A/C button or knob—just press it to activate the cooling mode. Next, turn the temperature control knob to the lower range, such as around 18°C, and the system will automatically blow cold air. To cool down quickly, I also prefer to increase the fan speed by pressing the fan button and setting the airflow direction to face mode. If the car has an AUTO function, pressing it once enables intelligent adjustment without manual hassle. In summer, remember to use the external circulation mode to refresh the air inside the car and avoid stuffiness. During long drives, avoid setting the AC too cold to prevent catching a cold. Once you're familiar with these steps, driving becomes comfortable and hassle-free.
Turning on the air conditioning for cooling is a daily routine for me. After starting the vehicle, I locate the A/C button on the control panel and press it gently to activate the AC. Then, I rotate the temperature setting knob below 20 degrees to feel the cool air blowing out. I avoid setting the fan speed too high to minimize noise, usually opting for a moderate wind speed. When turning it on, I recommend running the external circulation for a minute or two first to expel the hot air inside the car before switching to internal circulation. This method is more fuel-efficient and environmentally friendly for cooling. Over time, the AC might become less efficient, reminding me to clean the filter regularly to maintain freshness. Throughout the process, paying attention to the car's display indicators ensures simple operations to cool down the cabin, making family trips more comfortable and worry-free.
After starting the vehicle, immediately locate the air conditioning button in the control area and press it to activate the cooling function. Turn the temperature knob to the lowest setting, and cold air will start blowing out. Then adjust the fan speed as needed. The whole process takes just one or two steps—it's incredibly simple. Remember not to set the temperature too low on hot days to avoid catching a cold. Also, check if the air vents are functioning properly when parking to prevent minor issues. Operating the GS4's AC is just this quick and convenient.
Before turning on the air conditioning for cooling, I pay attention to the vehicle's condition. Ensure the engine is stable after starting, then press the A/C button on the AC panel to activate the cooling function; adjust the temperature knob to the 18-20 degree range and select a moderate fan speed. For higher efficiency, it's recommended to first use the external circulation for a few minutes to ventilate before switching it off, and keep the filter clean to prevent clogging. If abnormal fan noise or insufficient cooling is noticed during operation, it's time for maintenance. This routine ensures the air conditioning operates healthily, making daily drives in the GS4 much more worry-free.
