How to Turn on the Air Conditioning Cooling in Mazda6?

What is the method for removing the spark plugs of the Chery Tiggo 8?

Chery Tiggo 8 spark plug removal method is: 1. Open the engine hood of the Chery Tiggo 8 when the engine is cold, and locate the position of the spark plugs; 2. Remove the engine decorative panel and the fixing screws on the ignition coils; 3. Disconnect the connectors on the ignition coils and pull out all the ignition coils; 4. Use a special spark plug removal tool to remove all the spark plugs from the cylinder head; 5. Install the new spark plugs into the cylinder head and tighten them to the specified torque. Taking the 2020 Chery Tiggo 8 as an example, it is a mid-size SUV with body dimensions of: length 4700mm, width 1860mm, height 1746mm, wheelbase of 2710mm, and a curb weight of 1509kg.

15

4

Share

What gear should be in when waiting at a red light?

When waiting at a red light, you should shift to N or neutral. The steps for waiting at a red light are: 1. When you see the red light from a distance, gently press the brake to slow down; 2. When you reach the intersection with the red light, press the clutch all the way down; 3. While pressing the clutch all the way down, press the brake all the way down; 4. After the car stops, shift the gear to neutral and pull up the handbrake; 5. Release the clutch and brake, then wait for the red light. The steps for starting the car are: 1. Get in the car and sit properly; 2. Start the car; 3. Press the clutch and brake; 4. Release the handbrake and shift to first gear; 5. Slowly release the clutch; 6. Gently press the accelerator; 7. Fully release the clutch, and the car will start moving.

17

2

Share

How to Check the Remaining Fuel Level in an Audi A4L?

Audi A4L checks the remaining fuel level through the fuel gauge on the central instrument panel. Taking the 2020 Audi A4L as an example, it belongs to the mid-size car category with body dimensions of: length 4858mm, width 1847mm, height 1439mm, and a wheelbase of 2908mm. The fuel tank capacity is 56 liters. The 2020 Audi A4L features a five-link independent suspension at the front and a five-link independent suspension at the rear. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 270Nm. It is paired with a 7-speed dual-clutch transmission.

20

1

Share

Where is the dg15t engine produced?

dg15t engine is produced in China. The engine is a device that provides power for automobiles, determining the vehicle's power, fuel economy, stability, and environmental performance. The function of the engine: It converts the thermal energy of gasoline into mechanical energy by burning the gas in a sealed cylinder to expand the gas, pushing the piston to do work. The engine consists of: 1. Valve train; 2. Crankshaft and connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system. The maintenance methods for the engine are: 1. Use qualified engine oil; 2. Use qualified coolant and antifreeze; 3. Regularly clean the scale in the radiator; 4. Regularly clean the carbon deposits in the engine; 5. Regularly replace the three filters of the car; 6. Maintain a reasonable speed.

13

3

Share

Where is the glove box?

The glove box is located in front of the passenger seat. It consists of a glove box light, door hinge, door lock mechanism, and damper. The glove box light provides illumination when the owner opens the glove box, lighting up the interior of the storage compartment. The glove box door lock comes in hook-type and pin-type configurations. The method for removing and installing the glove box is as follows: Open the car's glove box, remove the piston buffer clip on the right side, rotate the fixing button on the inner right side counterclockwise, and there are knobs on both the left and right sides inside that need to be removed. The glove box can then be opened to its maximum extent. Use a clip pry tool to remove the fixing pins on the left and right sides of the glove box. After removing the pins, the glove box can be taken off.

4

Share

Can the drum brakes of Toyota Vios be converted to disc brakes?

Toyota Vios drum brakes can be converted to disc brakes. The drum brake system consists of the brake backing plate, brake wheel cylinder, brake shoes, related linkages, springs, pins, and the brake drum. Taking the 2021 Toyota Vios as an example, it belongs to the compact car category with body dimensions of 4435mm in length, 1700mm in width, and 1490mm in height, a wheelbase of 2550mm, a fuel tank capacity of 42 liters, and a curb weight of 1070kg. The 2021 Toyota Vios is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 110PS, a maximum power of 81kW, and a maximum torque of 138Nm, paired with a 5-speed manual transmission.

2

3

Share

How to Turn on the Air Conditioning Cooling in Mazda6?

What is the method for removing the spark plugs of the Chery Tiggo 8?

What gear should be in when waiting at a red light?

How to Check the Remaining Fuel Level in an Audi A4L?

Where is the dg15t engine produced?

Where is the glove box?

Can the drum brakes of Toyota Vios be converted to disc brakes?

What are the reasons why a car won't start even though it has power?

What is considered a normal mileage for a new car?

What are the reasons for battery overheating?

Which region does the license plate prefix 'Yu' represent?