How to Turn on the Air Conditioning Cool Air in a Honda?

What does FOLDER mean on a car radio?

FOLDER on a car radio refers to a folder, which in the context of a car means the ability to switch between audio folders. Here are the relevant details: 1. FOLDER button: Pressing the FOLDER button allows the audio system to switch and play audio from other folders, enabling song changes. It's worth noting that some cars may label the FOLDER button as TUNE-FOLDER. 2. Notes: Buttons like PAU, RPT, and RDM can only be used when the audio system is in CD mode. If some buttons don't respond when pressed, it may be because the mode isn't correctly switched. Simply switch to the correct mode.

14

0

Share

How to Adjust the Wiper Angle?

Turn the key to ON, turn on the wipers, and let the wiper blades automatically return to the bottom of the windshield. Then turn off the wipers and the key. At the base of the wiper arm, remove the dust cover. Use an appropriate wrench or socket to loosen the screw. Then lift the wiper blade and gently shake it. Once it is loose, position the wiper blade to the desired location, tighten the screw, and replace the dust cover.

10

4

Share

Can a motorcycle's stiff gear shift be adjusted?

Adjust the clutch, which can be done at the left handlebar and on the engine. Slowly fine-tune it to resolve the issue of stiff gear shifting on a motorcycle. Below is a related introduction to motorcycle gears: 1. Sequential shifting: In sequential shifting, pulling the clutch and pressing down once puts it in first gear, then slowly release the clutch. Pull the clutch and press down again for second gear, then slowly release the clutch. Pull the clutch and press down once more for third gear, then slowly release the clutch. Pull the clutch and press down again for fourth gear, then slowly release the clutch. Pull the clutch and press down once more to return to neutral. 2. International shifting: In international shifting, pulling the clutch and pressing down while lifting once puts it in first gear, then slowly release the clutch. Pull the clutch and lift again for second gear, then slowly release the clutch. Pull the clutch and lift once more for third gear, then slowly release the clutch. Pull the clutch and lift again for fourth gear, then slowly release the clutch.

4

1

Share

What is the reason for not being able to register on 12123 after the transfer?

The vehicle information has not yet been synchronized to the 12123 server, or it may be that the vehicle has already been registered by four users, so you cannot register it. The 12123 platform allows each user to register three vehicles not under their name, and a single vehicle can be registered by up to three drivers besides the owner. Below are the specific details: 1. Information delay: After purchasing a new car, there may be a delay in information synchronization. Generally, you can check the vehicle information on 12123 after waiting about half a month. If the vehicle information still cannot be found or registered after a long time, you should consult the staff at the vehicle management office for detailed assistance. 2. Exceeding the registration limit: The 12123 platform has a requirement that each user can only register three vehicles not under their name, and a single vehicle can be registered by up to three drivers besides the owner. If the number of registrations exceeds this requirement, registration will naturally be impossible. 3. Vehicle already bound: If the previous owner has already bound the vehicle during the sale of a used car, you will need to ask the previous owner to unbind it before you can register it again.

15

0

Share

What to do if the wiper linkage is rusty?

Remove the wiper, then use sandpaper to grind off the rust, spray some paint, and reinstall it to solve the problem. Purchase the same model of wiper from a 4S store, remove the old wiper, and install the new one.

19

5

Share

How to Deal with Fault Code 522012?

Fault code 522012 indicates a control relay OFF malfunction. In this case, it is necessary to replace the relay and fuse. The fuse can connect the circuit, allowing the current to flow more smoothly. Below are some common fault codes: 1. P0000: No fault. 2. P0100: Air flow meter circuit malfunction. 3. P0101: Air flow meter circuit malfunction. 4. P0102: Air flow meter circuit input voltage too low. 5. P0103: Air flow meter circuit input voltage too high.

18

5

Share

How to Turn on the Air Conditioning Cool Air in a Honda?

What does FOLDER mean on a car radio?

How to Adjust the Wiper Angle?

Can a motorcycle's stiff gear shift be adjusted?

What is the reason for not being able to register on 12123 after the transfer?

What to do if the wiper linkage is rusty?

How to Deal with Fault Code 522012?

What is the actual fuel consumption of the Civic 1.5t?

Will points be deducted if the simulated lights interfere with the turn signal?

How to Downshift When Encountering a Red Light in 5th Gear?

How to Adjust the Wiper Stroke Size?