How to turn on the air conditioning cold air in the Baojun 510?

[VanKatherine]

To turn on the air conditioning cold air in the Baojun 510, follow these steps: First, turn on the car's air conditioning system, then press the air conditioning switch in the lower left corner, and press the AC button to activate the cold air mode. After turning on the cold air mode, adjust the circulation to internal circulation for better cooling performance. Here is an introduction to the Baojun 510: 1. The Baojun 510 features a stylish and avant-garde design with rich and practical configurations, along with highly responsive driving performance. 2. The car's dimensions are 4220×1740×1625mm, with a brand-new exterior and interior color scheme, offering three driving modes: standard, economy, and sport. 3. Using the car's air conditioning system can reduce driver fatigue and minimize driving hazards. 4. The air conditioning system is a key indicator of a car's full functionality, as it controls the temperature inside the cabin to maintain a comfortable level.

[Phoebe]

I often drive the Baojun 510, and turning on the cold air conditioning is quite simple. First, start the vehicle's engine to ensure the generator is running. Then, locate the air conditioning control panel on the center console and press the fan power button to turn on the fan. The key is to press the AC button with the snowflake icon to activate the compressor for cooling. Adjust the temperature knob to the lowest blue zone, such as around 20 degrees; set the fan speed higher for quicker cooling. Don't forget to switch to the recirculation mode, closing the external air intake to prevent hot air from entering, which helps cool the car faster. In summer, open the windows for a few minutes to let out the hot air before turning on the cold air for better efficiency. Regularly check the refrigerant level and the air conditioning filter to avoid blockages that could affect performance, ensuring the system stays in good condition for a longer lifespan. Remember, you must turn on the AC for cold air—just the fan alone won't work.

[LeCora]

My Baojun 510's AC works fine for cooling. After starting the car, press the AC power button to turn on the fan; locate and press the AC button to illuminate it, which activates the compressor; turn the temperature knob to the lowest blue zone; adjust the fan speed to maximum or a comfortable level. On hot days, ventilate the car beforehand. If your car has an auto mode, simply press AUTO for convenience—the system will automatically adjust temperature and airflow. Regularly clean the air filter to prevent dust buildup and odors; direct the vents toward yourself for better cooling. The cooling principle involves the compressor circulating refrigerant—don’t confuse it with the heating mode. Experiment with different settings when parked to find the most comfortable state for various road conditions. Consult the manual or get a checkup if issues arise.

[LaAriel]

Steps to turn on the air conditioning for Baojun 510: Start the engine and turn on the fan switch; Press the AC button to activate cooling; Adjust the temperature control to the low blue zone; Set the fan speed and direction. Note: Regularly replace the air filter to prevent clogging that affects cooling; Turn on the internal circulation mode to speed up cooling. Avoid excessive fan noise by adjusting to a suitable wind speed. The cooling system relies on refrigerant circulation, ensure there are no leaks or insufficient pressure; If cooling is slow, check for leaks and perform maintenance. Simple operation and maintenance can extend the service life and ensure a cool driving experience.