How to Turn on the Air Conditioner for Cold Air in an Automatic Transmission Car?

1 Answers
Katherine
07/29/25 2:23pm
To turn on the cold air in an automatic transmission car, simply press the A/C button and adjust the temperature dial to the blue zone. Here are the relevant details: Button Introduction: AC is the air conditioning switch, MAX stands for maximum, and the internal circulation can be manually turned on or off. To get cold air, just lower the temperature setting. Conditions for Automatic Internal Circulation: By default, when the air conditioning is turned on and set to the maximum state (or when there is a significant temperature difference between the inside and outside of the car), the internal circulation will automatically activate. In other cases, it generally does not activate automatically. Alternating Between Internal and External Circulation: In external circulation mode, the air conditioner draws air from outside the car, while internal circulation reuses the air inside the car. Prolonged use of internal circulation can reduce air quality inside the car, potentially causing dizziness or discomfort. It is advisable to switch to external circulation for a few minutes after using internal circulation for a while, allowing fresh air to enter the car and improve air quality.
Was this review help?
16
2
Share
More Forum Discussions

What to Do When the Highway is Closed and You Can't Exit?

Follow the arrangements of traffic police and road administration, and exit the main highway under their guidance. Under severe weather conditions, highway traffic control is divided into the following three levels: 1. Level 3 Control: When the highway experiences severe weather such as heavy rain, heavy snow, or thick fog with visibility between 100 to 200 meters, Level 3 control is implemented, meaning partial road closures and traffic interruptions lasting less than 3 hours; 2. Level 2 Control: When the highway experiences severe weather like heavy rain, heavy snow, or thick fog with visibility between 50 to 100 meters, making it unsafe for vehicles to pass, Level 2 control is enforced, involving regional road closures and traffic interruptions lasting 3 to 6 hours; 3. Level 1 Control: When the highway experiences severe weather such as heavy rain, heavy snow, or thick fog with visibility below 50 meters, or when road surfaces are icy and unsafe for vehicles, Level 1 control is applied, resulting in full highway closures and traffic interruptions lasting more than 6 hours.
9
1
Share

What are the functions of antifreeze?

Antifreeze has the following functions: 1. Anti-corrosion: Antifreeze not only does not cause corrosion to the engine cooling system but also has anti-corrosion and rust removal functions; 2. High boiling point: The boiling point of water is 100 degrees Celsius, while high-quality antifreeze coolant typically has a boiling point above 110 degrees Celsius, making it less likely to boil over in summer compared to water; 3. Anti-scaling: Using water as a coolant can cause scaling issues that trouble drivers. Scale adheres to the metal surfaces of the radiator and water jacket, gradually reducing heat dissipation efficiency and being difficult to remove. High-quality antifreeze is made with distilled water and contains anti-scaling additives, which not only prevent scale formation but also have descaling capabilities.
7
3
Share

Can You Drive a Manual Transmission After Learning Automatic?

Learning automatic transmission does not qualify you to drive manual transmission vehicles. An automatic transmission license is categorized as C2, while a manual transmission license is C1. A C1 license permits driving C2 and C3 vehicle types. When enrolling in driving school, choosing C1 means learning to drive manual transmission vehicles, whereas selecting C2 means learning automatic transmission vehicles. The operational learning for these two differs significantly; at the very least, the left foot is not used in automatic transmission vehicles. If you can drive a manual transmission vehicle, switching to an automatic is operationally similar, with the only difference being the absence of a clutch pedal, to which one can quickly adapt. Automatic transmission generally refers to a car's automatic gear-shifting mechanism, where the control system of the automatic transmission selects the appropriate gear based on the engine's speed and load during driving, replacing the driver's subjective judgment on timing and gear shifting. Typically, automatic transmission vehicles have six gear positions, arranged from top to bottom as: P, R, N, D, S, L. The commonly used automatic gear positions are Park (P), Reverse (R), Neutral (N), and Drive (D).
6
3
Share

What transmission does the Volkswagen Tharu use?

Volkswagen Tharu uses a transmission provided by Volkswagen. The Volkswagen Group operates 68 wholly-owned and joint-venture enterprises worldwide, with business areas covering vehicle R&D, production, sales, logistics, services, auto parts, car rental, financial services, auto insurance, banking, IT services, and more. The Volkswagen Tharu transmission employs a 7-speed dry dual-clutch transmission. The 7-speed dual-clutch transmission features seven forward gears and utilizes a dry clutch system. Unlike conventional automatic transmissions, dual-clutch transmissions combine the characteristics of both manual and automatic transmissions, offering the flexibility of manual transmissions and the comfort of automatic transmissions while providing uninterrupted power output. When using the Volkswagen Tharu's transmission in daily driving, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged failure to change transmission fluid can damage internal components such as bearings and housings; Avoid prolonged coasting in neutral. While many experienced drivers coast in neutral with manual transmissions, doing so with an automatic transmission can cause overheating and create shock when shifting back to D gear; Never shift into D/R gear before the vehicle comes to a complete stop. Some drivers shift directly into reverse while the vehicle is still moving to demonstrate "smooth" operation, but this can severely damage transmission gears and lead to gear grinding over time; Avoid frequently climbing steep slopes in D gear. Automatic vehicles may overheat under high load or shift prematurely, resulting in insufficient climbing power. In such cases, use manual mode to lock in low gears or switch to sport mode to protect the transmission; Do not tow the vehicle over long distances. If an automatic vehicle breaks down, use a flatbed tow truck to transport it while in N gear rather than towing it directly with a tow rope.
14
5
Share

What is the transmission model used in the Sagitar?

The manufacturer of the Volkswagen Sagitar's transmission is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Volkswagen Sagitar uses a 7-speed dry dual-clutch transmission or a 5-speed manual transmission. The continuously variable transmission (CVT) does not have specific gears; it operates similarly to an automatic transmission, but the ratio changes continuously rather than in steps like a traditional automatic transmission, ensuring smooth and uninterrupted power delivery. For the Volkswagen Sagitar's transmission in daily use, the following points should be noted: Do not delay transmission fluid changes for extended periods. Prolonged intervals without changing the transmission fluid can damage internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission models, many experienced drivers may coast in neutral, but for automatic transmission models, this can cause overheating and create a shock when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers shift into reverse while the car is still moving to showcase smooth operation, but this can severely damage the transmission gears and lead to gear grinding over time. Avoid frequently climbing steep slopes in Drive (D). On steep inclines, automatic transmission vehicles may overheat due to high load or shift up too early, resulting in insufficient power. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to move it onto the tow platform while in Neutral (N). Avoid using tow ropes or towing the vehicle directly.
5
3
Share

How many days after car window tinting can you roll down the windows?

After car window tinting, you can roll down the windows after 3 days in summer and 7 days in winter. During this period, avoid randomly raising or lowering the windows, as doing so in a short time may cause the tint film to shift, since it hasn't fully dried between the film and the glass. After tinting, park the car in a sunny place to facilitate the evaporation of moisture inside the film, and avoid washing the car for three days. Car window tinting involves applying a thin film-like material to the front and rear windshields, side windows, and sunroof. This film, also known as solar film or heat-insulating film, primarily blocks ultraviolet rays, reduces heat, prevents injuries caused by flying glass, and reduces glare. Additionally, it serves to protect personal privacy due to the one-way visibility feature of the solar film. It also minimizes damage to interior items and passengers from UV exposure, lowers the car's interior temperature through physical reflection, reduces the use of air conditioning, and thereby decreases fuel consumption.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.