How to Turn on the 360-Degree Panoramic View in Toyota RAV4?

What Materials Are Needed for Driver's License Renewal?

Driver's license renewal requires the following materials: the driver's ID card, driver's license, three one-inch white-background photos of the applicant, and a medical certificate issued by a county-level or higher medical institution or a military medical institution at the regimental level or above. Time for driver's license renewal: According to the regulations on the application and use of motor vehicle driver's licenses, the driver should apply for renewal at the vehicle management office where the license was issued or another office 90 days before the expiration date of the current license. Driver's license renewal process: You can bring your ID card and driver's license directly to the renewal authority, where you can take photos, undergo a physical examination, make copies, and renew the license on-site. If you don't mind the hassle, you can also go to a qualified hospital for the physical examination and a photo studio for photos, then bring all the required documents to the renewal authority to apply for renewal.

15

2

Share

Will points be deducted if the car body is not straight during the reverse parking in Subject 2?

Subject 2 reverse parking with an unaligned car body is considered a pass. As long as the car body does not cross the line during reverse parking, no points will be deducted. The straightness or tilt of the car body does not affect the test results. Below are the relevant details: 1. The Subject 2 test is part of the motor vehicle driver's license assessment. The original on-site test included selecting three items from nine: fixed-point parking and slope starting, parallel parking, curve driving, right-angle turning, speed and width-limited gates, continuous obstacles, 100-meter gear shifting, and bumpy road driving. The revised Subject 2 test now consists of five mandatory items: reverse parking, parallel parking, fixed-point parking and starting on a slope, right-angle turning, and curve driving. The test rules have been adjusted to be stricter. 2. The entire test is judged by the onboard computer and evaluated by the system. Not following the prescribed route or sequence results in a 100-point deduction. The car body crossing the line results in a 100-point deduction. Failing to complete the reverse parking results in a 100-point deduction. Stopping midway results in a 100-point deduction. The test evaluates the driver's ability to operate the car within the designated area. Reverse parking is a key assessment point in the driver's test, requiring the driver to correctly reverse the car into the garage from both sides while in motion.

17

1

Share

Is It Normal to Buy 2019 Tires in 2021?

It is not normal to buy 2019 tires in 2021. Tires that have been in storage for over a year are considered stock tires. Tires that have been in storage for three years are expired, as the rubber has aged, significantly reducing comfort and making them prone to cracking and poor heat dissipation. This greatly impacts both acceleration and braking, and increases the risk of blowouts at high speeds, seriously endangering the safety of the vehicle owner's life and property. Purchasing such tires is absolutely prohibited. Below is relevant information about tires: 1. Check the tire's expiration date: The sidewall of the tire will have a four-digit number indicating the manufacturing date, with the first two digits representing the week and the last two representing the year. Generally, tires should not be used for more than three years or exceed 60,000 kilometers in mileage. 2. Pay attention to the sidewall: As the tire rubber ages, deep cracks may appear on the sidewall. However, as long as the sidewall has not been impacted and the cords are not broken, the tire can still be used. The triangular mark on the tire sidewall can help the owner locate a protrusion in the tread groove, which indicates the actual wear limit of the tire. That value should be greater than 1.6 millimeters.

17

0

Share

What are the types of brake pad materials?

Brake pads are generally classified into four major categories. The following are these four types of materials: 1. Semi-metallic friction materials: Used in disc brake pads for passenger cars and heavy-duty vehicles. 2. NAO friction materials: Broadly refers to non-asbestos and non-steel fiber friction materials, though modern disc pads may contain small amounts of steel fibers. 3. Powder metallurgy friction materials: Also known as sintered friction materials, these are made by mixing and pressing iron-based or copper-based powdered materials, followed by high-temperature sintering. 4. Carbon fiber friction materials: A type of friction material reinforced with carbon fiber.

17

1

Share

How to Maintain a Car with 200,000 Kilometers?

For a car with 200,000 kilometers, it is normal to replace the engine oil and oil filter; check whether the brake fluid, transmission oil, and power steering fluid should be replaced; inspect the brake pads, tires, shock absorbers, and suspension; check the spark plugs, throttle valve, and fuel supply system; perform front and rear wheel rotation and routine checks (lights, battery, etc.). Below is the relevant introduction to car maintenance: 1. Exterior inspection: Before driving, check the doors, engine hood, trunk, and glass condition, inspect the body for damage, whether the body is tilted, and if there are any oil or water leaks. 2. Engine and various fluids: Check the fixing condition of engine components, inspect all engine joints for oil or water leaks. Check and adjust the tightness of the belt, inspect the fixing condition of all pipes and wires. Check and replenish engine oil, coolant, and electrolyte. 3. Tires: Check tire wear and clean the trunk. Replace tires when they are close to the wear mark. Inspect tires for bulges, abnormal wear, aging cracks, or hard damage. 4. Cleaning and lubrication: Clean the oil stains from the engine hood, door, and trunk hinge mechanisms, and lubricate them. The general service life of antifreeze is 2 years, so it should be replaced during maintenance, and the cooling system should be thoroughly cleaned. Due to the hygroscopicity of the braking system, brake fluid should be replaced every two years.

20

4

Share

What are the symptoms of damaged engine high-voltage wires?

The symptoms of damaged car high-voltage wires include the spark plug releasing a dim yellow and insufficiently energetic spark, which fails to properly ignite the air-fuel mixture, prevents the spark plug electrodes from releasing sparks, and leads to issues such as misfiring due to unburned mixture. Hazards of engine misfiring: Engine misfiring results in reduced engine power, increased fuel consumption, and noticeable vibrations and noise. Prolonged operation of an engine cylinder that only injects fuel without ignition can also cause gasoline flooding in the cylinder. Manifestations of ignition coil failure: At idle, the vehicle body shakes noticeably; while driving, when the RPM is below 2500, the body exhibits significant shaking and weak acceleration; once the RPM exceeds 2500, the shaking sensation disappears. Opening the engine hood and observing the running engine reveals obvious engine vibrations.

10

2

Share

How to Turn on the 360-Degree Panoramic View in Toyota RAV4?

What Materials Are Needed for Driver's License Renewal?

Will points be deducted if the car body is not straight during the reverse parking in Subject 2?

Is It Normal to Buy 2019 Tires in 2021?

What are the types of brake pad materials?

How to Maintain a Car with 200,000 Kilometers?

What are the symptoms of damaged engine high-voltage wires?

Can You Cover a Car with a Car Cover in Summer?

Why does the Blue Whale engine have such high fuel consumption?

What Are the Reasons for Higher Engine RPM in Winter?

Does the steering wheel need calibration after removal and reinstallation?