How to Turn on High Beam in Sylphy?

1 Answers
LeMorgan
07/30/25 2:07am
The method to turn on high beam in Sylphy is as follows: 1. Hold the leftmost end of the light control lever located on the left side of the steering wheel; 2. Rotate it forward (toward the front of the vehicle) - one rotation sets it to AUTO mode; 3. Rotate once more to turn on parking lights, and another rotation activates low beam; 4. Push the entire light control lever forward to turn on high beam, and pull it back to turn off high beam. Additional information about vehicle high beams: 1. High beams adjust light intensity based on filament distance. The focused parallel light from high beams provides concentrated illumination with high brightness, capable of reaching distant and elevated objects. 2. Low beams operate beyond the focal point (1-2 times focal length), emitting divergent light that illuminates a wider range of nearby objects.
Was this review help?
9
2
Share
More Forum Discussions

Does a private car need to go through the inspection line in its 6th year?

Private cars need to go through the inspection line in their 6th year. Below is the relevant information about vehicle annual inspection: 1. Initial inspection: The inspection conducted by motor vehicles to apply for a license plate is called the initial inspection. The purpose of the initial inspection is to verify whether the motor vehicle meets the conditions for applying for a driving license. 2. Definition: National regulations stipulate that motor vehicles must regularly pass inspections for exhaust emissions, vehicle appearance, lights, brakes, chassis, etc., and obtain an inspection qualification mark if there are no violation records. All annual inspection dates are based on the date registered on the vehicle license. Motor vehicles must undergo safety technical inspections according to the following periods from the date of registration, commonly referred to as "annual inspection" or "annual review."
3
2
Share

What are the differences between the Corolla 1.2T and 1.5L?

Here are the differences between the Corolla 1.2T and 1.5L: 1. Different engines: The 1.5L is a naturally aspirated engine; the 1.2T is a turbocharged, direct-injection engine, with turbocharging being an advanced technology. 2. Different fuel consumption and maintenance costs: Both the 1.2T and 1.5L Corolla models have a fuel consumption of just over 7L per 100 kilometers, which isn't expensive when calculated over 10,000 kilometers, so it shouldn't be a decisive factor in purchasing. In terms of maintenance costs, the three-cylinder engine and the regular four-cylinder engine don't differ much. 3. Different displacement: The 1.5L naturally aspirated engine is the most reliable, but its fuel consumption generally increases after 50,000 kilometers.
1
1
Share

How to Replace the Battery in an Audi Q5L Key?

Audi Q5L key battery replacement method is: take out the mechanical key inside the remote control, then directly pry open the shell, remove the battery that needs to be replaced, and install the new battery. The car smart key is a common keyless entry system, also known as the smart key system, which consists of a transmitter, remote central lock control module, and driving authorization system control module. It can transmit infrared signals to open one or two doors, trunk and fuel tank cap, and can also control the car's windows and sunroof. The Audi Q5L has a body size of 4753mm in length, 1893mm in width, and 1659mm in height, with a wheelbase of 2908mm. The car's drive mode is front-engine four-wheel drive, with front and rear suspension types both being five-link independent suspension.
8
5
Share

What Problems Will Occur If a Car Relay Fails?

Symptoms of a damaged car relay include the starter not turning, weak starter operation, and starter freewheeling. Below are specific details about car relays: 1. Function: The basic role of a car relay is to act as an "automatic switch" that uses a small current to control the operation of a larger current. It serves functions such as automatic regulation, safety protection, circuit switching, and more in the electrical system. 2. Selection Based on Usage Environment: The usage environment mainly refers to temperature (maximum and minimum), humidity (typically the maximum relative humidity at 40 degrees Celsius), low air pressure (can be ignored if used below 1000 meters altitude), vibration, and impact. Additionally, there are requirements for packaging methods, installation techniques, dimensions, and insulation. Due to differences in materials and structures, relays can withstand varying environmental mechanical conditions. Using a relay beyond the environmental mechanical conditions specified in the product standards may damage it. Therefore, relays should be selected based on the environmental mechanical conditions of the entire machine or higher-level conditions.
15
5
Share

Where is the Evaporative Emission Control Valve Located?

Evaporative emission valve is located on the pipeline between the carbon canister and the engine intake pipe. Below is the relevant introduction about the evaporator: 1. Working principle: The evaporator vaporizes the compressed and liquefied refrigerant, changing it from liquid to gas while absorbing heat, thereby lowering the temperature of the surrounding medium and serving a cooling function. 2. Composition: The evaporator consists of one or several sets of coils. 3. Maintenance: (1) Fins: Inspect the surface of the evaporator fins. If clogged with dirt, it should be cleaned (do not use water) and blown clean and dry with compressed air. If bent or deformed, use needle-nose pliers or a screwdriver to straighten them. (2) Pipes and threaded joints: Check the pipes and threaded joints. If cracked, damaged by foreign objects or the fan, or showing cracks or scratches, they should be replaced or repaired by welding.
19
5
Share

What is the function of engine oil in a car?

Engine oil serves the following purposes: 1. Lubrication to reduce wear: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing bush in the engine, which can easily cause wear. High-quality engine oil can form a sufficiently thick oil film between these two sliding surfaces, separating the relatively sliding parts to achieve the goal of reducing wear. 2. Cooling: Engine oil can carry heat back to the oil tank and then dissipate it into the air, assisting the radiator in cooling the engine. 3. Cleaning: Good engine oil can circulate carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, flushing away dirt generated on the working surfaces of the parts through the flow of the lubricating oil. During normal use, engine oil will also have a certain consumption rate, so it is necessary to regularly check the oil level and its degree of contamination.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.