How to Turn on High Beam Headlights?

1 Answers
Brielle
07/24/25 6:13pm
Currently, vehicle light switches are primarily lever-type and rotary-type switches, with lever-type being the most common. To activate the high beams, gently push the lever downward. Rotary-type switches only have a dedicated high beam position. Rotate the light control switch handle to the high beam position to illuminate the high beams.
Was this review help?
11
0
Share
More Forum Discussions

How to Replace the Battery in an Envision Car Key?

To replace the battery in an Envision car key, follow these steps: 1. Press the button on the transmitter to pull out the key; 2. Use a flat tool to insert into the bottom of the transmitter and separate it into two halves; 3. Press the battery and slide it toward the bottom of the transmitter to remove the old battery; 4. Insert the new battery with the positive side facing the back cover; 5. Press the battery down until it is secured in the correct position; 6. Reattach the battery cover to the transmitter. Additional relevant information is as follows: 1. The Envision is a mid-size SUV under the Buick brand, with dimensions of 4694mm in length, 1839mm in width, and 1686mm in height, and a wheelbase of 2750mm. 2. The Envision features a MacPherson strut independent front suspension and a multi-link independent rear suspension, with a front-wheel-drive system.
4
0
Share

How to Ensure Safety When Driving on Mountain Roads?

The following are precautions to take when driving on mountain roads: 1. Avoid overtaking when possible: Mountain roads are often narrow with many curves, and the outer lane may border cliffs or steep slopes, making overtaking risky. If overtaking is unavoidable, do not attempt it on curves; choose straight sections instead and carefully observe the road conditions ahead and behind. 2. Select the appropriate gear for uphill driving: For manual transmission vehicles, use a low to medium gear (2nd or 3rd gear) when climbing hills. This utilizes the engine's high torque output to ensure sufficient power and avoids mid-hill gear changes that could disrupt smooth power delivery. 3. Pay attention to road signs while driving and slow down accordingly. Before entering a curve, honk your horn to alert any oncoming vehicles.
3
1
Share

How to Replace the Battery in a BMW 7 Series Key?

Here is the method to replace the battery in a BMW 7 Series key: 1. Remove the mechanical key. You will see two holes—one for the mechanical key and the other for removing the key cover. 2. Insert the mechanical key into the hole for removing the key cover and gently pry it open using the lever principle to access the battery compartment. 3. Use a toothpick to remove the old battery and insert a new one. 4. Place the battery back into the car remote key in the reverse order of removal. Additional notes: When replacing the battery, remember to check for signs of corrosion in the battery and battery compartment. Sometimes, dead batteries may crack or leak corrosive chemicals. If you notice signs of corrosion, carefully clean the battery compartment before installing the new battery. If your remote stops working, it might be due to battery damage.
3
1
Share

What Causes Excessive Tire Pressure?

The reasons for excessive tire pressure include: over-inflation of the tire leading to high pressure; hot weather causing gas expansion and increased pressure; prolonged driving generating heat through friction, raising the pressure; and aging or worn suspension components related to the wheels, resulting in misalignment, uneven wear, higher temperature, and increased tire pressure. Hazards of excessive tire pressure: Reduced friction and adhesion of the tire, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating wear on the central tread pattern, shortening tire lifespan. Increased vehicle vibration, indirectly affecting the lifespan of other components; excessive stretching deformation of tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; decreased puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts due to impact, leading to a tire burst.
9
1
Share

What is the difference between the Kodiaq and the Kodiaq GT?

The differences between the Kodiaq and the Kodiaq GT are as follows: 1. The front fascia of the Kodiaq and the Kodiaq GT does not have significant differences, with the design being largely consistent. The rear part of the body, however, features two distinct styles. From the side view, the Kodiaq has a square and rugged profile, embodying a traditional SUV shape. In contrast, the Kodiaq GT adopts a fastback design, presenting a typical coupe style. While the rear design is roughly similar, the Kodiaq GT has a more pronounced rear window slope. 2. The interior dashboard design of both models is largely similar. The most notable difference lies in the seats. The Kodiaq uses conventional seats, whereas the Kodiaq GT is equipped with integrated sport seats, which offer significantly better support and body-hugging fit compared to standard seats.
17
3
Share

What does the foot brake in the Sylphy mean?

The foot brake in the Sylphy operates on the same principle as the handbrake, except it is activated by foot pedal instead of a hand lever. Additionally, the foot brake is typically positioned to the left of the brake pedal, saving space in the center console area and contributing to a more aesthetically pleasing design. Generally, vehicles equipped with foot brakes are automatic transmission models. The specific usage of the foot brake varies slightly depending on the scenario, as detailed below: 1. Parking on flat ground: After the vehicle comes to a stop, press the brake pedal, shift to P (Park) gear, then engage the foot brake before releasing the brake pedal. 2. Parking on a slope: After the vehicle stops and the brake pedal is pressed, engage the foot brake first before shifting to P (Park) gear to prevent the vehicle from rolling. 3. The foot brake has its pros and cons. Since it shares the same principle as the handbrake, it offers high stability and rarely malfunctions. Moreover, using the foot brake requires less effort than the handbrake, and it does not occupy space in the center console, enhancing the design's aesthetics. However, novice drivers might accidentally press the foot brake. Additionally, for drift enthusiasts, the foot brake is less effective compared to the direct action of a handbrake.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.