How to Turn on Car Headlights?

What is the appropriate normal kPa for wheel pressure?

Wheel pressure is normally appropriate at around 250 kPa. Tires are the only components of a car that come into contact with the ground, and they are crucial for the vehicle's driving stability and safety. Tires are very important for a car, and tire pressure is equally important for the tires. The tire pressure should neither be too high nor too low. If the pressure is too high, it will reduce the contact area between the tire and the ground, leading to decreased tire grip. If the pressure is too low, it can cause wave-like deformation of the tire during high-speed driving, which accelerates tire aging and increases the risk of a blowout. Tires are made of rubber, and rubber products will age over time with prolonged use, so tires need to be replaced regularly.

2

4

Share

Why is there hot air when the car's air conditioning is off?

The reasons why there is hot air when the car's air conditioning is off are: 1. The internal circulation mode is not activated. When the air conditioning is turned off, the system automatically switches to external circulation mode to ensure air flow inside the car. The outside air passing through the engine compartment becomes heated; 2. The temperature control is not set to the coldest state, leaving the air mix damper open. This allows heat from the engine coolant to enter the car through the damper. External circulation: Uses a fan to draw outside air into the car. In congested urban areas, the car may fill with exhaust fumes. Internal circulation: Blocks outside air from entering the car, preventing harmful external gases and helping to maintain interior temperature.

3

Share

Is it harmful to shift into P gear before the car comes to a complete stop?

Shifting into P gear before the car comes to a complete stop can cause significant damage to the vehicle's transmission system. If this practice is repeated over time, it can lead to severe wear and tear on the transmission, and in extreme cases, render the transmission unusable. When you shift into P gear while the car is still moving, it is equivalent to bringing the vehicle to an abrupt halt, forcibly locking the output shaft of the transmission. This can cause mechanical shock to both the parking brake and the locking mechanism of the transmission. The correct procedure for parking and shifting gears is as follows: Before coming to a stop, the car should first decelerate. Once the car is completely stationary, shift from D gear to N gear, engage the handbrake, release the foot brake, and then turn off the engine. After the engine is off, shift from N gear to P gear, and finally remove the key. It is important to note that for automatic transmission vehicles, the brake pedal must be pressed before parking; otherwise, shifting gears will not be possible.

4

Share

Does a dented car door need to be replaced?

Whether a dented car door needs to be replaced depends on the severity of the dent. If the dent is minor, it can usually be repaired through metalworking techniques. However, if the dent is severe, replacing the door might be necessary. It's important to address a dented car door promptly to prevent rusting. Car doors provide access for drivers and passengers, isolate external disturbances, and to some extent, mitigate side impacts to protect occupants. The quality of a car door is primarily reflected in its crash performance, sealing performance, ease of opening and closing, and other functional indicators. Crash performance is particularly crucial because, during a side collision, the buffer distance is very short, making it easy for passengers inside the vehicle to be injured.

19

4

Share

What Causes the Car Key to Sometimes Not Turn?

The reasons why a car key may not turn include the steering wheel being locked or the key chip being damaged. Here are the detailed explanations: Steering Wheel Locked: The steering wheel lock is a simple anti-theft feature. When the vehicle's anti-theft system detects a potential theft risk, it locks the steering wheel to prevent theft. To unlock it, insert the key, press the brake, and then gently turn the steering wheel left and right. Although the steering wheel is locked, it can still move slightly. While turning the steering wheel, try turning the key to complete the unlocking process. Key Chip Damaged: The car remote and engine anti-theft systems are separate. If the key's anti-theft signal is lost and cannot unlock the car, use a decoder to read the anti-theft system's fault codes to confirm if the anti-theft system is locked. Alternatively, consult a professional who specializes in anti-theft key matching to reprogram the anti-theft key.

8

0

Share

How Many Kilometers Should a New Car's Oil Be Changed?

It is most appropriate to change the oil for a new car at around 5,000 kilometers. Below are the relevant details: Oil change intervals for different cars: Mineral oil should be changed every six months or 5,000 kilometers, semi-synthetic oil every six months or 7,500 kilometers, and full synthetic oil every six months or 10,000 kilometers. New cars should strictly follow the maintenance intervals specified in the manual to avoid serious damage. Precautions for changing oil in a new car: The amount of oil added should be appropriate, as indicated by the dipstick. After adding oil, start the engine and check for any leaks in the components. After starting the engine, run it for 3 minutes and check the oil level again. Ensure the oil level is at the normal mark, there are no leaks, reset the maintenance light, and the oil change is complete.

4

3

Share

How to Turn on Car Headlights?

What is the appropriate normal kPa for wheel pressure?

Why is there hot air when the car's air conditioning is off?

Is it harmful to shift into P gear before the car comes to a complete stop?

Does a dented car door need to be replaced?

What Causes the Car Key to Sometimes Not Turn?

How Many Kilometers Should a New Car's Oil Be Changed?

What Causes Wiper Blade Chatter?

Which platform is the Bentley Bentayga built on?

Why Are Wheels Designed in a Circular Shape?

What are the differences between Borui GE and Borui?