How to turn off the Volkswagen Sagitar with one-button start?

How many points are deducted for overtaking in congested sections?

Overtaking in congested sections deducts 2 points. Pre-departure inspection: Before setting off each day, conduct a comprehensive vehicle check, including checking for oil or water leaks, measuring tire pressure to ensure it is appropriate, inspecting the engine oil condition to verify its color is normal and the oil level is correct. Safe driving: Use seat belts correctly; in the event of a severe collision, seat belts provide protection no less effective than airbags. Avoid fatigue driving; take a break every 2 hours. Traffic rule compliance: Especially on highways, do not speed. Speeding not only risks traffic police penalties but, more importantly, is unsafe.

3

5

Share

What are the components of the intake system?

The intake system consists of an air filter, air flow meter, intake pressure sensor, throttle body, auxiliary air valve, idle control valve, resonance chamber, and power chamber. A complete intake system can be divided into two parts: the engine intake manifold system and the air intake system. The main functions of the intake system: To deliver clean, dry, sufficient, and stable air to the engine to meet its requirements, preventing impurities and large dust particles from entering the engine combustion chamber, which could cause abnormal engine wear. How the intake system works: When the engine is running, the driver controls the throttle opening via the accelerator pedal to adjust the intake volume and regulate engine operation. Air entering the engine passes through the air filter to remove dust and other impurities, then flows through the air flow meter, moves along the throttle passage into the power chamber, and is distributed to each cylinder via the intake manifold. During cold engine idling, some air bypasses the throttle through the auxiliary air valve or idle control valve and enters the cylinder. Benefits of cleaning the intake system: Effectively cleans and removes colloids and carbon deposits inside the nozzles, maintaining the cleanliness of the fuel system. Cleans the exhaust gas recirculation system, reduces emissions, saves fuel, and effectively protects the oxygen sensor and catalytic converter. Helps prevent symptoms such as explosions, unstable idling, and poor acceleration caused by colloids and carbon. Removes carbon deposits from the valve seats, lubricates the valves and valve guides, improves sealing, restores cylinder pressure, and enhances power. Cleans carbon deposits from the combustion chamber, lubricates the upper part of the cylinder, reduces piston ring wear, and extends service life.

12

2

Share

Why does a motorcycle start and then stall after a dozen seconds?

The reason a motorcycle starts and then stalls after a dozen seconds is due to: clogged idle air jets, malfunctioning idle devices, and carburetor or fuel line blockages. Pre-ride inspection: Check the motorcycle's condition, ensuring the headlight, turn signals, horn, handlebars, etc., are functioning properly. Attire and protective gear: A helmet is a legally required protective device, and brightly colored clothing should be chosen. Traffic rules compliance: Avoid racing with cars, drive safely according to traffic laws, and yield to pedestrians. Do not follow too closely; maintain an appropriate distance behind the right rear corner of the vehicle ahead. When overtaking, pass from the left side of the vehicle ahead; avoid passing on the right or between two parallel vehicles. On highways, motorcycles should not exceed 80 kilometers per hour, as exceeding this limit may result in penalties from traffic police.

14

5

Share

What is the function of the hold button in an automatic transmission car?

Automatic transmission car hold button is the automatic parking function. After the function is activated, in case of a brief temporary stop, the car can be stopped by the brake pedal. Temporary parking: When the vehicle is temporarily parked and needs to be restarted after a very short period of time, this type of parking is completed by the ESP-controlled brakes. The computer will use a series of sensors to measure the levelness of the vehicle body and the torque of the wheels, make a judgment on the tendency of the vehicle to move, and apply an appropriate braking force to the wheels to keep the vehicle stationary. Exceeding the time limit parking: When the temporary parking exceeds a certain time limit, the braking system will switch to mechanical rear-wheel parking (activating the electronic parking brake) to replace the previous four-wheel hydraulic braking. When the vehicle is about to move forward, the electronic system will detect the pressing force of the accelerator pedal and the travel of the clutch pedal in manual transmission models to determine whether to release the brake.

18

2

Share

Is Touch-Up Paint Free for New Cars?

Touch-up paint is not free for new cars within the first year of purchase. Color selection for touch-up paint: When touching up the paint, it's crucial to ensure the paint is properly mixed. Over time, vehicle paint fades, so the touch-up paint must be matched to the current body color. Touch-up based on specific damage conditions: For minor paint damage, such as small dots, you can use a vehicle-specific touch-up pen to apply a small amount. This prevents rust formation and is barely noticeable, avoiding the need for extensive repainting. For fine scratches like those from tree branches or car washing, applying car wax multiple times can usually reduce their visibility. If the vehicle has noticeable scratches or the paint is chipped down to the primer, immediate repair is necessary to prevent rusting of the metal, which could lead to large-scale corrosion and significant damage to the car's surface.

18

5

Share

Does Changing Transmission Fluid Affect Performance?

Changing transmission fluid does not affect performance. The signs that indicate the need for transmission fluid replacement are: body vibration, gear shifting hesitation; the dashboard displays a transmission overheating warning; the car stalls; unusual noises occur. The methods for changing transmission fluid are as follows: Unscrew the drain plug at the bottom of the transmission to drain the old fluid before refilling. Remove the transmission oil pan directly to drain and refill the fluid: this method is more thorough than the previous one, as it removes impurities from the bottom of the oil pan. Use a circulation machine to replace automatic transmission fluid: dynamic fluid replacement with an intelligent circulation machine can filter and clean sludge and impurities inside the automatic transmission. The hazards of not changing transmission fluid for a long time include: 1. Damage to the transmission's gear shift control mechanism; 2. Abnormal wear of gears and clutch plates inside the transmission; 3. Affecting the normal operation of the transmission, leading to damage to the transmission valve body.

19

5

Share

How to turn off the Volkswagen Sagitar with one-button start?

How many points are deducted for overtaking in congested sections?

What are the components of the intake system?

Why does a motorcycle start and then stall after a dozen seconds?

What is the function of the hold button in an automatic transmission car?

Is Touch-Up Paint Free for New Cars?

Does Changing Transmission Fluid Affect Performance?

Can I still check the vehicle registration cancellation on 12123?

Can Hefei Apply for an Electronic Driver's License?

What is required for vehicle inspection?

Can You Change Engine Oil When the Engine is Still Hot?