···
Log in / Register

How to turn off the voice traffic report in Magotan 2020?

3 Answers
VivianMarie
09/05/25 3:42am
There is a navigation volume setting; you don't need to turn it off completely, just keep a little sound. When using navigation, click in and scroll down to select 'Turn off navigation voice prompts'.
Was this review help?
12
5
Share
LeLydia
09/17/25 4:18am
When I drove the 2020 Magotan, I also found the traffic voice alerts too noisy as they constantly interrupted my music. Later, I figured out a simple solution: after starting the car, tap the menu button on the central touchscreen, go to the settings, find the navigation section, and there's a voice announcement setting where you can turn off traffic alerts. This feature actually provides real-time congestion updates via internet connection, originally intended to help drivers save time. But if you find it annoying, it's perfectly fine to disable it completely. For daily driving, I recommend keeping only severe congestion alerts enabled or lowering the volume to avoid missing important information. If you can't turn it off, try restarting the system: hold the power button for 10 seconds to reset. If you still can't resolve it, check the user manual or visit the 4S store for assistance—don't compromise safety by struggling with it.
Was this review help?
20
0
Share
Expand All
VanAshlyn
10/31/25 4:49am
As someone who enjoys tinkering with car systems, I found it quite straightforward to disable the voice traffic updates on the 2020 Magotan. Just go to the main interface of the central control screen, tap on Vehicle Settings, select Navigation Functions, scroll down to find the Voice Services option, and disable Traffic Announcements. The system likely relies on GPS and network data, and navigation continues to work normally after turning it off. I recommend checking for software updates first, as bugs can sometimes cause settings to fail; using CarPlay or Android Auto via smartphone connection can offer a quieter alternative. While voice alerts can warn of accidents, turning them off during frequent updates can be more pleasant. If issues arise, a soft reset of the system or consulting online forums can help, as the Volkswagen owner community often shares solutions.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

What to Pay Attention to After Picking Up the Car?

There are several points to note after picking up the car: 1. Check if the vehicle identification number (VIN) matches the invoice: On the day of pickup, it is essential to verify the invoice and the VIN because the original invoice is required when officially registering the car at the vehicle management office. If there is an issue with the original invoice or an error in the VIN, it will be impossible to officially select a license plate at the vehicle management office. 2. Check for any scratches on the car body: During the process from the factory to the 4S store, some minor scratches may inevitably occur. Therefore, on the day of pickup, carefully inspect all four doors of the car, including the roof and other areas, to ensure there are no significant scratches. 3. Check if the onboard tools are complete: When picking up the car, also thoroughly inspect the onboard tools, such as the spare tire, jack, tire-changing tools, warning triangle, etc.
6
0
Share

Is it okay to service the car once a year?

Car maintenance can be done once a year, depending on the condition of the car itself. The first maintenance is generally around 2,500 kilometers, and it is recommended to do a minor maintenance every 5,000 kilometers thereafter. Car maintenance includes the following points: 1. First-level maintenance items for the vehicle: After completing the first-level maintenance, the vehicle should be clean, connections should be secure, the three filters should be clear, and there should be no oil, water, air, or electricity leakage. 2. Lubrication items for first-level vehicle maintenance: Check the oil levels of the generator, transmission, rear axle, and steering gear, and add lubricating oil as required. All oil nozzles on the vehicle should be complete and effective. 3. Inspection and tightening items for first-level vehicle maintenance: Check the steering gear, tie rods, steering arms, and their connections for tightness.
4
3
Share

What is the fuel consumption of the Civic 1.5T?

Manual transmission 1.5T Civic has an average fuel consumption of approximately 7.0 liters per 100 kilometers. The related introduction of fuel consumption is as follows: Fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the fuel consumption of a vehicle traveling a hundred kilometers on the road at a certain speed. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then specified speed driving to calculate the theoretical experimental fuel consumption data per 100 kilometers of the model. Road condition fuel consumption: Road condition fuel consumption is a fuel indicator calculated by repeatedly testing the values measured when the vehicle travels at specified speeds and times on designated roads, also known as multi-condition road cycle fuel consumption.
3
1
Share

Is it necessary to press the brake when shifting gears in an automatic transmission car?

In most cases, shifting gears does not require pressing the brake. However, you need to press the brake when shifting to the following gears: 1. N gear on slopes: This is the neutral gear, which is used for short stops. At this time, the right foot can leave the brake pedal to rest. But if you are on an uphill or downhill slope, you still need to press the brake to prevent the car from rolling, unless you engage the handbrake or electronic brake. 2. Waiting at a red light: If the red light lasts less than 30 seconds, it is recommended that the driver simply press the brake. 3. Starting the car in P gear: When starting the car, shifting from P to D gear will pass through R gear. The correct procedure is to turn on the power, press the brake, shift to N gear, then start the engine and shift to D gear.
6
4
Share

How to reset the maintenance light on a Mercedes-Benz C200L?

The method to reset the maintenance light on a Mercedes-Benz C200L is: 1. Start the engine; 2. Switch the dashboard display to the odometer interface; 3. Hold down the OK button on the left side of the steering wheel with your left hand and the phone button on the right side of the steering wheel with your right hand for several seconds; 4. Select ASSYSTPLUS in the maintenance menu and press the OK button; 5. Choose the complete maintenance and press the OK button; 6. Confirm the complete maintenance. Taking the 2018 Mercedes-Benz C200L as an example, this is a mid-size car with a length, width, and height of 4783mm, 1810mm, and 1442mm respectively, a wheelbase of 2920mm, equipped with a 2.0T turbocharged engine with a maximum power of 135kw, matched with a 9-speed automatic manual transmission.
20
2
Share

What is the solution to the ticking sound in the Ford Escort?

The solution to the ticking sound in the Ford Escort is: 1. Normally, when the engine block temperature reaches around 95 degrees, the sound will return to normal; 2. Poor-quality engine oil or situations where the oil has not been changed for a long time, or there is a lack of oil, can easily increase friction between the valves and guides as well as hydraulic lifters, making various sounds in the engine louder. It is recommended to change the oil and add oil frequently. Taking the Ford Escort 2019 modified 1.5L manual Comfort Edition National VI as an example, the dimensions of this car are 4587mm in length, 1825mm in width, and 1490mm in height, with a wheelbase of 2687mm. The body type of this car is a 4-door, 5-seater sedan, with a 6-speed manual transmission, naturally aspirated intake, and a top speed of 187 kilometers per hour.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.