How to Turn Off the Vios Start-Stop System?

2 Answers
MiaLynn
07/29/25 6:44am
Simply press the auto start-stop button. More related information is as follows: 1. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) during driving. When it's time to move forward again, the system automatically restarts the engine. The STT intelligent fuel-saving system is a set of controls for engine start and stop. 2. The working principle of the start-stop system is that when the vehicle stops moving due to congestion or at an intersection, the driver presses the brake pedal and shifts to neutral. At this point, the Start/Stop system automatically checks: the engine is idling and not in gear; the wheel speed sensors of the anti-lock system show zero; the electronic battery sensor indicates sufficient energy for the next start. Once these three conditions are met, the engine automatically stops. When the traffic light turns green, the driver presses the clutch, and the 'start stopper' can be activated immediately, quickly restarting the engine. In automatic transmission models, as soon as the brake is released or the steering wheel is turned, the engine automatically ignites again, allowing the driver to press the accelerator and start moving immediately, all while remaining in D gear.
Was this review help?
2
1
Share
KennedyRose
08/12/25 10:08am
When I first drove the Vios, I kept thinking about how to turn off that auto start-stop function. It always shut off at red lights and gave a slight shake when restarting, which was really annoying. Actually, it's quite simple—just look for a small button with the letter "A" near the steering wheel. That's the switch; hold it for a few seconds to disable the start-stop for the current trip. If you want to permanently disable it, you'll need to go into the dashboard settings menu and uncheck the "Engine Start-Stop" option. I eventually turned it off because I felt the frequent starts and stops put too much pressure on the battery, especially in older cars, which could shorten the battery's lifespan. However, keep in mind that turning it off will slightly increase fuel consumption, but I prioritize a smoother drive. If you don't want to do it yourself, a quick visit to the 4S shop will get it sorted in minutes—they can also check if frequent starts are due to voltage issues.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

How to Turn Off the Engine Start-Stop Function on Nissan Teana?

The method to turn off the engine start-stop function on Nissan Teana is: simply press the automatic start-stop button to deactivate it. The engine automatic start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move forward again. The Nissan Teana is a mid-size 4-door, 5-seater sedan with body dimensions of 4901mm in length, 1850mm in width, and 1450mm in height, with a wheelbase of 2825mm. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 115 kW and a maximum torque of 197 Nm. The drivetrain configuration is front-engine, front-wheel drive, with a MacPherson strut front suspension and a multi-link independent rear suspension with trapezoidal control arms.
4
4
Share

How to Fold the Rearview Mirror of the T-Roc?

The method to fold the rearview mirror of the T-Roc is: locate the rearview mirror folding icon on the mirror angle adjustment knob on the driver's side door, then rotate the adjustment knob to the position of the folding icon. The T-Roc is a compact SUV under FAW-Volkswagen, with body dimensions of 4318mm in length, 1819mm in width, and 1582mm in height, a wheelbase of 2680mm, and a fuel tank capacity of 51 liters. The T-Roc is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110 kW at 5000-6000 rpm and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission.
5
2
Share

What is the normal tire pressure for Iveco?

The normal tire pressure for Iveco varies depending on the model: 1. The normal tire pressure for a 17-seat Iveco is 4.5 to 5.5 bar; 2. The normal tire pressure for an Iveco RV is 4.8 to 5.3 bar. Taking the Iveco Ousheng 2021 manual Shangrui long-wheelbase high-roof manual door version as an example, its body structure is a passenger vehicle, with dimensions of 7080 mm in length, 2011 mm in width, and 2735 mm in height, a wheelbase of 3950 mm, and a fuel tank capacity of 100 liters. The Iveco Ousheng 2021 manual Shangrui long-wheelbase high-roof manual door version is equipped with a 3.0T turbocharged engine, with a maximum power of 125 kW and a maximum torque of 400 N·m, paired with a 6-speed manual transmission.
15
3
Share

How to Turn on High Beam in Audi?

Audi's method for activating high beam is: 1. After starting the vehicle, check the dashboard to ensure there are no lighting malfunctions; 2. Locate the light control knob on the panel behind the left side of the steering wheel; 3. Turn the light knob to AUTO or the low beam symbol position; 4. Push the lever outward to switch from low beam to high beam. Audi models include A1, A2, A3, A4, A5, A6, A8, Q7, R series, convertibles, and sports car series. Taking the 2020 Audi A4L as an example, it belongs to the mid-size sedan category with body dimensions of: length 4858mm, width 1847mm, height 1439mm, and a wheelbase of 2908mm.
9
1
Share

How to Use a Car Key to Open the Door?

Using a car key to open the door can be done in the following ways: 1. Mechanical Key: Insert the mechanical key directly into the door's keyhole to unlock it; 2. Remote Key: Press the unlock button to open the door. The steps to replace the car key battery are: 1. Press the button on the back of the key; 2. Slide the back cover forward to open it and remove the old battery; 3. Insert the new battery and reattach the back cover. Maintenance tips for car keys include: 1. Avoid placing them near mobile phones; 2. Do not drop the car key; 3. Keep it away from high temperatures or liquids; 4. Be cautious when replacing the battery. Functions of the car key include: 1. Closing windows after turning off the engine; 2. Locating the car in a parking lot; 3. Automatically opening the trunk.
11
5
Share

Why Does the Car Air Conditioner Emit a Burnt Smell When Heating?

The reasons for a burnt smell when the car air conditioner is heating are: 1. There is electric auxiliary heating, which is the smell from electrical components working; 2. The warm air passes through hard plastic ducts, producing the smell when the plastic heats up. The method to use the car air conditioner for heating is: 1. After starting the vehicle, turn off the AC button; 2. Wait until the water temperature rises to the normal value, then turn on the air conditioner heating. The functions of the car air conditioner are: 1. To provide a comfortable environment for passengers, reducing travel fatigue; 2. To create good working conditions for the driver. The car air conditioner, also known as the car air conditioning device, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to maintain a good state.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.