How to Turn Off the Trunk Light That Stays On When the Car Trunk Is Open?

What Parts Are Replaced During Car Maintenance?

Introduction to parts replaced during car maintenance: 1. Engine oil and oil filter: These are basically replaced during every maintenance service. Car engine oil is generally divided into three types: mineral oil, semi-synthetic oil, and fully synthetic oil. Different oils have different replacement cycles. Typically, mineral oil should be replaced every 5,000 kilometers or six months, semi-synthetic oil every 7,000 kilometers or six months, and fully synthetic oil every 10,000 kilometers or one year. During daily driving, if the driving environment is harsh, the oil replacement cycle may vary. 2. Antifreeze: Car antifreeze not only prevents freezing but also helps cool the engine during operation. In winter, when temperatures are low, antifreeze protects the engine from cold damage. Generally, antifreeze should be replaced every three years or 50,000 kilometers. When replacing antifreeze, note that different brands and types of antifreeze should not be mixed, as this can reduce performance. 3. Windshield washer fluid: This is mainly used to clean dirt from the windshield and should be refilled when empty. In winter, it is recommended to use antifreeze windshield washer fluid to prevent the washer fluid reservoir from freezing and affecting normal use. 4. Cabin air filter: The cabin air filter purifies the air to ensure clean airflow from the air conditioning system. It generally needs to be replaced every one to two years. 5. Brake fluid: Brake fluid has different properties compared to other fluids. It is hygroscopic, meaning it absorbs moisture during use. When brake fluid absorbs moisture, it can form bubbles, leading to softer brakes and longer stopping distances. It is recommended to replace brake fluid every two years. 6. Transmission fluid: The replacement cycle for transmission fluid is relatively long, typically every five years or over 60,000 kilometers. Transmission fluid ensures smoother vehicle operation. During regular use, the transmission fluid should be inspected, and the correct specification should be noted when replacing it.

19

4

Share

What is the engine power of the Audi A6L?

The engine power of the Audi A6L is 140/4200-6000 kW Rpm. Engine power: The maximum output power of the engine is 177 kW/241 hp, 246 kW/335 hp, and 309 kW/420 hp respectively. When selecting which engine to equip in this new sedan, the extraordinary comfort and power of the Phaeton, as well as the technical potential of the Volkswagen brand, were fully demonstrated. The engines used in the models on the market are: 3.2-liter V6 engine with an output power of 177 kW/241 hp, maximum torque of 315 Nm, equipped with a Tiptronic six-speed manual/automatic transmission; 4.2-liter V8 engine with an output power of 246 kW/335 hp, maximum torque of 430 Nm, equipped with a Tiptronic six-speed manual/automatic transmission; the top-level model features a 6-liter W12 engine with an output power of 309 kW/420 hp, maximum torque of 550 Nm, equipped with a Tiptronic five-speed manual/automatic transmission.

2

Share

What's wrong with the brake light failure of Haval H2s?

Haval H2 brake light failure indicates that there may be a problem with the car's braking system. It is recommended to go to an auto repair shop and use an automotive computer diagnostic tool to check the anti-lock braking system (ABS). By reading the fault codes, the issue can be identified, and then repaired according to the fault content. If it is an intermittent fault, use the automotive computer diagnostic tool to clear the fault codes, and the fault indicator light will turn off. Severe brake pad wear: The car's brake pads are equipped with a manufacturer-set brake pad warning line. When the brake pads reach their limit of use, an alarm will be triggered. It is necessary to regularly inspect the tire brake pads and use measuring tools to check the thickness of the brake pads. If the wear is significant, immediate replacement is required. Low brake fluid: When the car brakes, brake fluid is compressed into the pipelines and brake calipers. If the brake fluid level is low, the fluid level sensor will detect it and trigger an alarm through the fault light. Regularly check the brake fluid reservoir to ensure it is not low on fluid, and add brake fluid immediately if needed. Wiring issues: There may be an open circuit in the wiring affecting the dashboard warning light. Use a multimeter to check the brake pad warning circuit, brake fluid level warning circuit, and handbrake switch circuit to detect any wiring problems.

2

4

Share

Where is the chassis lifting function located on the BMW 740?

The chassis lifting button for the BMW 7 Series is located on the central console, to the left rear of the gear shift lever. The button is marked with a small car icon featuring upward and downward arrows. To use it, start the vehicle and keep the gear in P (Park). Press and hold the lifting button, and the chassis will begin to rise. Release the button once the vehicle reaches the desired height. Principle of car chassis lifting: The car is equipped with body height sensors. The hydraulic suspension control unit collects data through these sensors (or a manual adjustment switch in the cabin) and the vehicle speed, then issues commands to raise or lower the chassis. Four electromagnetic valves inject hydraulic oil into the four shock absorbers respectively, enabling adjustable body height. The faster the vehicle speed, the lower the ground clearance of the chassis. Functions of car chassis lifting: Raising the chassis can appropriately improve the vehicle's off-road capability (including overcoming obstacles and shallow water), making it a relatively practical feature. Lowering the chassis reduces the vehicle's drag coefficient (slightly improving fuel efficiency). Additionally, lowering the chassis shortens the suspension travel, providing better lateral support and enhancing the vehicle's road performance (reducing the risk of rollover).

14

0

Share

Where is the rearview mirror heating button located on the Jetour X90?

On the Jetour X90, the rearview mirror heating function button is located on the air conditioning panel, specifically the middle button among the three rotary knobs. Detailed introduction is as follows: Function of heated rearview mirrors: Car rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rain droplets or fog. This eliminates the need for drivers to frequently wipe the mirrors manually, thereby reducing driving risks. The rearview mirror heating function is integrated into the central control button area, combined with the rear window defogger switch. Pressing this button simultaneously heats both the rear window and rearview mirrors. In cold weather when mirrors are prone to frost accumulation, heated rearview mirrors become especially important. Principle of heated rearview mirrors: During rainy or snowy conditions, when the rearview mirror heating switch is pressed (indicated by an illuminated button), the heating elements rapidly warm up to a fixed temperature (typically between 35-60°C) within minutes. Both side mirrors will emit warm air, causing water droplets to evaporate and fog to gradually disappear from the mirror surfaces, achieving defogging and defrosting effects. However, during extremely heavy rainfall, the effectiveness may decrease and become less noticeable.

9

1

Share

What is the top speed of the Honda CR-V?

The top speed mainly depends on the engine displacement. The 2.0L model can reach about 180-190 km/h, and going faster would be very unsafe. However, it can be estimated to exceed 210 km/h. SUVs are designed for comfort, and no matter how fast they go, they can't match sedans. Due to the large body size, it is not recommended to drive too fast as it is unsafe. Around 110 km/h is the most fuel-efficient speed. The factors affecting the top speed are as follows: Impact of Air Resistance: When a car is driving at high speed, it is subjected to various resistances, such as rolling resistance, acceleration resistance, gradient resistance, and air resistance. The faster the car goes, the greater the air resistance it encounters, which affects the car's acceleration performance and top speed. This is because part of the torque required for acceleration is offset by air resistance, and overcoming air resistance consumes power. Therefore, the top speed of a car is usually measured under conditions of full load, no wind, and a straight road. Maximum Power of the Engine: As the core component of a car, the engine plays a crucial role in the vehicle's power performance. The main reason sports cars are faster is that their engines have a higher maximum power output compared to regular models. Thus, the engine's maximum power determines the car's top speed. When the engine outputs its maximum power at a constant speed, that speed is the car's top speed. In other words, when the engine's maximum power output and the driving resistance reach a balance point, the car achieves its maximum speed.

19

0

Share

How to Turn Off the Trunk Light That Stays On When the Car Trunk Is Open?

What Parts Are Replaced During Car Maintenance?

What is the engine power of the Audi A6L?

What's wrong with the brake light failure of Haval H2s?

Where is the chassis lifting function located on the BMW 740?

Where is the rearview mirror heating button located on the Jetour X90?

What is the top speed of the Honda CR-V?

What brand are the original tires on the Changan CS75?

How to Drive a Semi-Automatic Car?

Where is the Ji F license plate from?

What car has a jaguar head logo?