How to Turn Off the Tire Pressure Warning Light?

1 Answers
LaCole
07/30/25 2:59am
To turn off the tire pressure warning light, follow these steps: 1. Start the engine; 2. Press the upward arrow button on the left side of the steering wheel until English text appears on the instrument panel; 3. Press the 'r' button on the instrument panel; 4. Press the plus (+) button on the right side of the steering wheel; 5. Restart the vehicle. The tire pressure warning light works by using sensors installed on the tires to monitor pressure and temperature in real-time. These sensors transmit data wirelessly to a receiver, which displays changes on the monitor to alert the driver. The system triggers an alarm when tire pressure drops or exceeds safe limits. Functions of the tire pressure warning light: 1. Prevent accidents; 2. Extend tire service life; 3. Reduce wear on vehicle components.
Was this review help?
18
2
Share
More Forum Discussions

Where to Purchase Motorcycle Insurance?

Motorcycle insurance is generally available through the following two channels: 1. Channel One: Purchase at any local insurance business hall that offers compulsory traffic insurance. 2. Channel Two: Insurance can also be purchased at the vehicle management offices in urban areas and county cities. Basically, urban areas and county vehicle management offices have dedicated motorcycle insurance service points. Therefore, motorcycle owners who want to purchase insurance can also go to the local vehicle management office to buy insurance. The required documents for motorcycle insurance are as follows: 1. Driver's License: You must have a driver's license with the qualification to drive a motorcycle; otherwise, you cannot legally drive. Motorcycle driver's licenses come in three types: D, E, and F. For two-wheeled motorcycles, an E license is sufficient. 2. Vehicle License: The vehicle license is proof that the vehicle is legally allowed on the road. Therefore, to legally drive on the road, the vehicle must have a vehicle license. Generally, after purchasing a motorcycle, the vehicle license can be processed at the place where the motorcycle was bought.
2
5
Share

What Causes One Wheel to Have No Brakes?

There are several reasons why one wheel may have no brakes, such as issues with the brake pump, brake pads and discs, brake fluid, or brake lines, all of which can cause one side to lose braking. Here are some braking techniques: 1. Emergency braking: Some vehicles lack ABS, so it's not advisable to fully press the brake pedal at once. Instead, press it twice in succession to prevent wheel lock-up, which can cause skidding or loss of steering control. 2. Braking in rainy conditions: When driving on wet roads, avoid slamming the brake pedal or turning the steering wheel abruptly. After passing through water, gently press the brake pedal twice to use inertia and friction to remove water from the brake discs, preventing brake failure during sudden stops. 3. Braking while following another vehicle: When following another car, brake gently to maintain a safe distance. Besides monitoring the leading car's braking, also pay attention to the vehicle ahead of it. If the leading car brakes, place your foot on the brake pedal in advance to prepare for sudden stops.
18
1
Share

Will all future cars be equipped with particulate filters?

All future cars will be equipped with particulate filters. Particulate filters can reduce and capture particles in engine exhaust emissions, recycle them, decrease vehicle exhaust emissions, enhance the environmental friendliness of vehicles, and reduce atmospheric pollution. To check whether a vehicle is equipped with a particulate filter, you can use the following three methods: Refer to the and to see if the particulate filter function is mentioned. Additionally, carefully review the fault codes in the manual to check if there is a "Particulate Filter" warning light indicator. Check the label on the oil filler cap. If the cap clearly indicates the use of 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. Inspect the exhaust pipe behind the three-way catalytic converter to see if there is an additional cylindrical section. If present, that is the particulate filter. Location of the particulate filter: The particulate filter is located behind the three-way catalytic converter and in front of the muffler, surrounded by the front and rear oxygen sensors.
7
5
Share

What is the fuel consumption of the Skoda Rapid?

Skoda Rapid has a fuel consumption of approximately 6.2L per 100 km for the 1.4L engine, 6.4L for the 1.6L manual, and 7.3L for the 1.6L automatic. Below is a brief introduction to the Skoda Rapid: 1. Exterior: As Skoda's first mass-produced model featuring a new design language, the Rapid won the prestigious German Red Dot Design Award shortly after its launch. The vehicle's design draws inspiration from Czech crystal-cutting techniques, featuring clean, flowing lines and bold, sculpted surfaces that create a three-dimensional and robust body shape. 2. Powertrain: It is equipped with a 1.4L engine delivering a maximum power of 90 horsepower and a 1.6L engine with a maximum power of 110 horsepower, paired with a 5-speed manual or 6-speed automatic transmission. This powertrain setup is also found in the domestic versions of the new Santana and new Jetta.
18
0
Share

What is the general speed limit on highways?

On the highways in mainland China, there are speed limits for motor vehicles. The general maximum speed is 120 km/h, and the minimum speed is 80 km/h. For special road sections and tunnels, the speed limit indicated on roadside signs should be followed. For novice drivers, maintaining a speed of 90-100 km/h is recommended for safety. Below are some precautions for driving on highways: 1. Safety check: Before getting on the highway, check for any potential safety hazards. It's essential to inspect your vehicle for any issues before driving on the highway. 2. Wear seat belts: Always wear seat belts in the front and rear seats, and avoid placing unsecured items in the vehicle. 3. Stay in one lane: Avoid frequent lane changes on the highway, switching between the overtaking lane and the regular lane. Do not make sudden decelerations or stops without warning. While driving, avoid driving side by side with other vehicles, staying in the overtaking lane for extended periods, or attempting to overtake from the emergency lane. Additionally, prepare for lane changes in advance when exiting the highway to avoid missing the exit.
18
4
Share

How many kilometers can a set of brake pads last?

The mileage depends on the car's usage. Generally, they need to be replaced every 50,000 kilometers, while some drivers can go up to 100,000 kilometers before replacement. In fact, under normal driving conditions, the service life of front brake pads is 30,000 kilometers, while rear brake pads last about 60,000 kilometers. Rust on car brake discs is a normal phenomenon. Here are detailed explanations about it: 1. Minor rust: Minor rust often occurs, such as after the car is left in the rain overnight or when it doesn't dry properly after washing. In such cases, continuous braking while driving can help remove the rust, as the friction between the brake disc and the brake caliper during braking will wear off the rust over multiple applications. 2. Severe rust: If the brake disc has severe rust, the entire surface may be covered with a thick layer of rust. Stubborn rust can also accelerate the wear of brake pads, so it's necessary to take the car to a repair shop to have the brake discs polished.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.