···
Log in / Register

How to Turn Off the Start-Stop Function on Haval H6?

3 Answers
PatrickMarie
07/30/25 12:12am
Haval H6 start-stop deactivation method: The Haval H6 auto start-stop system is automatically enabled by default when the ignition is turned on. To deactivate it, simply press the button once. Please note that the illuminated light indicates the system is turned off. The auto start-stop function automatically shuts off the engine when the vehicle comes to a temporary stop (such as at a red light) and restarts it when it's time to move forward again. The Haval H6 is a model under the Haval brand. In terms of body dimensions, the Haval H6 measures 4640mm in length, 1825mm in width, and 1690mm in height, with a wheelbase of 2680mm. Exterior-wise, the Haval H6 features dynamic micro-curves that outline the side profile, creating a poised and aggressive stance. The LED intelligent headlights adopt a wrapped wheel arch design.
Was this review help?
11
5
Share
LaNatalie
08/16/25 4:19am
Turning off the auto start-stop system in the Haval H6 is actually quite simple. While driving, locate a small button near the lower left side of the steering wheel or around the center console, usually labeled "Start-Stop OFF" or with a similar icon. Press it to disable the auto start-stop function. When I drive this car, I find the start-stop feature particularly annoying in congested areas, with the engine repeatedly starting and stopping, making buzzing noises and affecting acceleration response. After turning it off, the driving experience becomes much more comfortable, especially in urban areas with frequent traffic lights, allowing for smoother starts. Note that the button position may vary slightly across different model years of the H6, but it's always within easy reach from the driver's seat. Some people worry about increased fuel consumption after disabling it, but the difference is minimal, mainly improving comfort and control. If the button doesn't respond, check if the vehicle has a memory mode setting or try restarting the system, and ask a technician during maintenance to avoid minor issues.
Was this review help?
8
4
Share
Expand All
Thompson
10/19/25 6:34am
Turning off the auto start-stop on the Haval H6 is quite convenient. I often look for the auto start-stop button inside the car, which is usually located at the lower left of the dashboard or next to the gear shift lever—just press it to deactivate. Why turn it off? Because the engine vibration feels strong when the auto start-stop kicks in, and in traffic jams, the constant stopping and starting can be dizzying. With the system off, driving becomes smoother and reduces battery strain. While fuel efficiency is key for city driving, the impact on fuel consumption after disabling auto start-stop is minimal. Instead, it helps avoid mechanical wear from frequent engine restarts. I recommend that beginners first get familiar with the button's location and experiment with turning the system on and off in suburban areas or at night to find the best approach for themselves. Remember, the system defaults to 'on,' so you might need to turn it off each time you start the car—developing a habit of checking ensures a more comfortable drive.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

Why is the headlight of Chery Arrizo 5 not working?

The reasons and solutions for the headlight of Chery Arrizo 5 not working are as follows: Bulb failure: If you have a spare bulb, simply replace it. If there is no bulb available for replacement, such as when the low beam bulb is damaged, you can use the high beam to drive, but this will cause significant inconvenience to oncoming vehicles. Fuse blown: Check the relevant fuse. If the fuse is indeed blown, simply replace it with a fuse of the same capacity. Poor contact in the power socket: Walk to the front of the car and tap the cover of the non-working headlight. If the headlight briefly lights up, it can be confirmed that the socket has poor contact. In this case, simply unplug the headlight's power socket and plug it back in.
15
5
Share

Does the New BMW 7 Series Need a Break-in Period?

BMW 7 Series new cars require a break-in period, as every new vehicle sold needs to go through this initial phase in the owner's hands. Definition of break-in period: The break-in period generally refers to the process where mechanical components initially come into contact, friction, and engagement during operation. Precautions during break-in period: Avoid emergency braking whenever possible: Emergency braking not only shocks the braking system during break-in but also increases impact loads on the chassis and engine. It's best to avoid emergency braking within the first 300 kilometers of driving. Avoid overloading: If a new car operates at full capacity during the break-in period, it may cause damage to mechanical components. Therefore, within the first 1,000 kilometers of driving, the load should generally not exceed 75-80% of the rated capacity.
16
1
Share

What Causes the Abnormal Noise in Geely Borui's Engine?

The main reasons for abnormal noise in the BMW B48 engine are as follows: Long-term parking of the car: Engine oil flows back to the oil pan, and the oil pump cannot immediately establish oil pressure during a cold start, especially in the upper part of the engine. The valves do not receive sufficient lubrication, and the hydraulic lifters and mechanical rocker arms fail to operate normally, leading to abnormal noise. High viscosity of engine oil: This can result in insufficient lubrication during engine operation, causing friction and abnormal noise. Abnormal noise from the timing gear: After prolonged use, coupled with improper gear clearance adjustment and hardening of the timing belt, the gear may experience excessive wear. In severe cases, the gear teeth may even wear out, causing looseness in gear meshing, which results in abnormal noise during engine operation.
3
0
Share

What is the Pame car?

Pame refers to the Porsche Panamera. Introduction to Panamera's powertrain: The Porsche Panamera features luxurious interiors and is powered by a 4.8-liter V8 engine, reportedly derived from the facelifted Cayenne. It comes standard with a 7-speed dual-clutch transmission, with mid-range and top-tier models equipped with all-wheel drive. The car can accelerate from 0 to 100 km/h in 3.8 seconds, with a top speed nearing 310 km/h. Mid-range models achieve 0-100 km/h acceleration in 4.2-5.4 seconds. Introduction to Panamera's exterior: The car boasts smooth and flowing body lines with a four-door design. The front features large air intakes on each side, intersected by horizontal fog lights. The side profile is clean and soft, complemented by five-spoke wheel rims and yellow brake calipers, giving it a very sporty appearance.
10
0
Share

Why does the Audi A8's air conditioning suddenly stop cooling?

Audi A8's air conditioning suddenly stops cooling for the following reasons and solutions: Insufficient or low refrigerant: It may be caused by a small refrigerant leak. You can observe it from the sight glass on the dryer tank. When the air conditioning is running normally, if there are continuous and slow bubbles in the sight glass, it indicates insufficient refrigerant. If obvious bubble flipping occurs, it indicates a severe lack of refrigerant. In this case, simply add refrigerant. Loose drive belt of the car air conditioning compressor: If the drive belt is loose, the compressor will slip during operation, leading to a decrease in transmission efficiency and a drop in compressor speed. The delivery of compressed refrigerant decreases, resulting in the car air conditioning not cooling. If the compressor drive belt of the car air conditioning is too loose, it should be tightened. If it cannot be turned by hand, it means the drive belt is too tight and should be slightly loosened. If tightening is ineffective or the drive belt has cracks, aging, or other damage, a new drive belt should be replaced.
6
0
Share

What is the displacement of the new Santana?

The displacement of the new Santana is as follows: 1.4L manual fashion version; 1.6L manual comfort version; The Santana svw-7180-LED has a 1.8L displacement. Introduction to displacement: A specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. Displacement identification: Most domestically produced cars have a model number at the rear consisting of pinyin letters and Arabic numerals, which includes the following three parts: The first part consists of 2 or 3 pinyin letters, serving as the code to identify the manufacturer. The middle two digits represent the engine displacement of the car model, for example, "08" indicates an engine displacement of 0.8 liters, and "20" indicates 2.0 liters.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.