How to Turn Off the Start-Stop Function on Audi A4L?

What Causes Low Oil Pressure Warning?

Low oil pressure warning can be caused by: 1. Insufficient engine oil level leading to inadequate oil pressure; 2. Malfunction of the oil pressure sensor itself, causing incorrect pressure data received by the vehicle's computer; 3. Faulty wiring harness of the oil pressure sensor; 4. Malfunction of the oil pressure warning light in the instrument panel causing it to stay on; 5. Failure of the oil pump itself; 6. Blockage in the engine's oil passages. Normal oil pressure should be maintained within the range of 150 to 350 kPa. If the oil pressure gauge indicates a value below 98 kPa, it can be considered as low oil pressure, and the vehicle should be stopped immediately for inspection. Otherwise, it may cause excessive wear of components or even serious mechanical failures such as "bearing seizure".

2

Share

What do the different classes A, B, C, D, and E on a driver's license mean?

In driver's licenses, Class A represents large passenger vehicles, Class B represents large trucks, Class C represents small cars, Class D represents three-wheeled motorcycles with an engine displacement exceeding 50ml, and Class E represents two-wheeled motorcycles with an engine displacement exceeding 50ml. Below is relevant information about driver's licenses: 1. Concept: The full name of a driver's license is a motor vehicle driving license, also known as a "driver's license," which is the certificate required by law for individuals to operate motor vehicles. In China, the definition of a driver's license is: A motor vehicle driving license is a legal document issued by the administrative authorities after an individual who is legally permitted to learn to drive a motor vehicle has studied, mastered traffic regulations and driving skills, and passed the relevant tests, authorizing them to drive a certain type of motor vehicle. 2. Application Location: Individuals applying for a motor vehicle driving license should submit their application to the vehicle management office in accordance with regulations. Applicants residing in their place of household registration should apply there.

14

2

Share

What does the roadside parking space from 20:00 to 7:00 mean?

It refers to the permitted parking hours between 8:00 PM and 7:00 AM. Below are precautions for roadside parking: 1. Observe whether there are white-line parking spaces on the roadside: Most white-line parking spaces allow parking. However, when parking, ensure your vehicle is parked within the white lines. 2. Check the legality of the roadside parking space: In some cases, although parking spaces are marked on the ground, they may not comply with laws and regulations. For example: Parking spaces within 30 meters of bus stops, emergency stations, or gas stations are generally invalid. Avoid parking there to prevent unnecessary scratches on your vehicle caused by passing pedestrians or children playing.

16

3

Share

Does the Rearview Mirror Touching the Line in Reverse Parking for Subject 2 Result in Deduction?

Generally, touching the line with the rearview mirror during reverse parking in Subject 2 does not result in a deduction, depending on the specific markings at each test site. According to the "Motor Vehicle Driver Training and Examination Syllabus," as long as the vehicle body does not exceed the ground markings during reverse parking, no points will be deducted. The rearview mirror is protruding, so whether it is considered part of the vehicle body depends on how each local test site identifies the rearview mirror. Subject 2 has a full score of 100 points, with evaluation criteria set for failure, deduction of 20 points, deduction of 10 points, and deduction of 5 points. The rules for the Subject 2 test of the motor vehicle driver's license application state that stopping midway during the test, rolling back, or not following the voice prompts will result in failure. Additionally, if the wheels or vehicle body touch the line, the test will be failed. During Subject 2 training, many learners encounter issues with touching the line, and the most common mistake leading to failure is "touching the line." The main reason for the wheels touching the line is that learners have not mastered the correct timing for steering. Apart from missing the right moment to steer, another reason could be that the speed of steering does not match the vehicle's speed. Subject 2 Deduction Standards: Not wearing a seatbelt: Deduct 100 points. Starting the engine without the gear in neutral: Deduct 100 points. Not using the turn signal (including starting, changing lanes, overtaking, turning, or parking by the roadside); turning on the turn signal for less than three seconds (note that this is easily overlooked!); forgetting to turn off the turn signal or using it incorrectly: Deduct 10 points. Stalling once: Deduct 10 points. Reverse Parking: Not following the prescribed route sequence: Deduct 100 points. Vehicle body exceeding the line: Deduct 100 points. Failing to complete the reverse parking: Deduct 100 points. Before reversing, if both front wheels do not pass the control line: Deduct 100 points. Exceeding the 210-second time limit for the task: Deduct 100 points. Stopping for more than 2 seconds midway: Deduct 5 points each time. Slope Parking and Starting: After the vehicle stops, if the front bumper is not aligned with the pole line and exceeds 30 cm forward or backward: Deduct 100 points. After the vehicle stops, if the front bumper is not aligned with the pole line but does not exceed 30 cm forward or backward: Deduct 10 points. After the vehicle stops, if the starting time exceeds 30 seconds: Deduct 100 points. Wheels touching the road edge line while driving: Deduct 100 points. Rolling back more than 30 cm when starting: Deduct 100 points. After the vehicle stops, if the vehicle body is more than 30 cm away from the road edge line: Deduct 100 points. After parking, if the parking brake is not tightened: Deduct 10 points per occurrence. Parallel Parking: After the vehicle stops in the parking space, if the vehicle body exceeds the line: Deduct 100 points. Not using or incorrectly using the turn signal when parking: Deduct 10 points. Exceeding the 90-second time limit for the task: Deduct 100 points. Vehicle body touching the parking space edge line while driving: Deduct 10 points per occurrence. Wheels touching the lane edge line while driving: Deduct 10 points per occurrence. Stopping for more than 2 seconds midway: Deduct 5 points per occurrence. Right-Angle Turn: Wheels touching the road edge line: Deduct 100 points. Not using or incorrectly using the turn signal during the turn, or not turning off the turn signal after the turn: Deduct 10 points. Stopping for more than 2 seconds midway: Deduct 5 points per occurrence. Curve Driving: Wheels touching the road edge line: Deduct 100 points. Stopping for more than 2 seconds midway: Deduct 100 points. Driving without the gear in second or higher: Deduct 5 points.

15

4

Share

Why Do We Keep Pressing the Clutch While Learning to Drive?

When learning to drive, we usually don't press the accelerator, drive slowly in first gear, and don't need to shift gears. Only the clutch provides power to the car—pressing it fully cuts off power, while releasing it gradually supplies power. That's why we keep pressing the clutch while learning to drive. Here's more about the clutch: 1. Clutch location: The clutch is housed in the flywheel casing between the engine and the transmission, secured to the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the transmission. 2. Clutch function: While driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, cutting off or transferring engine power to the transmission. The clutch is a common component in mechanical transmission systems, allowing the drivetrain to be separated or engaged at any time.

15

1

Share

Does a slightly deformed fender need repair?

No. The methods for repairing a dented fender are as follows: 1. Pulling: First, preheat the glue gun by plugging it in, then start pulling from the edge of the dent. Choose an appropriate pull tab, apply hot melt glue, and stick it to the corner of the dent. Wait for the glue to dry before starting to pull—it doesn’t need to be completely dry, as it won’t be sticky if it dries too thoroughly. Then, use a pull hammer to pull the tab. The advantage of using pull tabs is that they can quickly create a rough shape and are relatively uniform, but the downside is that they aren’t as precise. So, once the rough shape of the dent is formed, use the pushing method to handle the details. 2. Pushing: First, use a thick tool to work on the larger surface—the larger the contact area, the better. Then, use the same method with a fine hook to handle the details.

3

1

Share

How to Turn Off the Start-Stop Function on Audi A4L?

What Causes Low Oil Pressure Warning?

What do the different classes A, B, C, D, and E on a driver's license mean?

What does the roadside parking space from 20:00 to 7:00 mean?

Does the Rearview Mirror Touching the Line in Reverse Parking for Subject 2 Result in Deduction?

Why Do We Keep Pressing the Clutch While Learning to Drive?

Does a slightly deformed fender need repair?

What is the 12123 Study to Reduce Points?

What is the general length of a minivan?

How to Deal with Overheated Car Seats in Summer?

What is the fuel consumption of the Trumpchi GS4 Plus?