How to Turn Off the Start-Stop Function in Audi Q5L?

Is Tire Pressure Monitoring Mandatory to Install?

Tire pressure monitoring is mandatory to install. The following are potential hazards caused by abnormal tire pressure: Reduced braking performance: Excessive tire pressure decreases the contact area between the tire tread and the ground, reducing friction and extending braking distance. Increased fuel consumption: Insufficient tire pressure increases the contact area between the tire tread and the ground, raising friction and resistance, which leads to higher fuel consumption. Shortened tire lifespan: Excessive tire pressure causes over-wear in the center of the tread, while insufficient pressure leads to over-wear on both sides of the tread. Both scenarios result in premature tire failure. Tire blowouts: According to a report by the National Highway Traffic Safety Administration (NHTSA), tire pressure 25% below the standard value triples the likelihood of a blowout, while pressure 25% above the standard value doubles the risk.

20

5

Share

Clicking Sound When Shifting Automatic Transmission?

Automatic transmission makes a clicking sound when shifting, which can occur under the following circumstances: 1. Generator gear issue. The symptom is a clicking sound when shifting to D or R gear while pressing the brake, but no sound when shifting to N gear. There is no abnormal noise while driving. Solution: Replace the generator. 2. Large valve clearance and poor lubrication when the engine is cold. The symptom is a clicking sound when shifting during the transition from cold to warm engine state, lasting about 3 minutes. This is normal and requires no action. 3. Parking on a slope by shifting to P gear first and then applying the handbrake. On a slope, due to inertia, there is an "external force." If P gear is engaged first, it bears the force, and the vehicle's weight is entirely on the P gear, resulting in a clicking sound when shifting. If the handbrake is applied first, the handbrake bears the force, and no clicking sound occurs. 4. Shifting while the vehicle is not fully stopped. This operation not only causes abnormal noise but also significantly shortens the transmission's lifespan.

7

3

Share

What is the total number of cars in China?

As of September 2018, the total number of motor vehicles in China reached 322 million, including 235 million cars. The following is relevant information about car ownership: Definition: Car ownership (car-parc) refers to the number of vehicles in a region, usually referring to vehicles registered locally. However, car ownership is different from motor vehicle ownership, as the latter includes motorcycles, agricultural vehicles, etc. Problems caused by the increase in car ownership: Although China's car ownership per thousand people is still less than half of the world average, the traffic congestion and air pollution caused by the rapid increase in the number of cars have reached a very serious level. Almost all major cities suffer from severe traffic congestion, and before National Day, Beijing repeatedly experienced unprecedented traffic jams. Air pollution caused by vehicle exhaust emissions has become the main source of pollution in many large cities.

1

4

Share

What is the difference between service brake and parking brake?

Service brake and parking brake have the following differences: Working principle: The parking brake refers to the handbrake, while emergency braking is mainly distinguished from anticipatory braking, which means taking immediate braking measures when an emergency is detected to stop the vehicle in the shortest possible time. Engine braking refers to using the engine's drag force to implement braking, such as when going downhill for a long distance. If the brakes are applied for too long, the brake pads may burn out. In such cases, you can shift to a lower gear and coast at idle speed, using the engine's drag force to control the vehicle's speed. Usage scenarios: The brake is the braking system. Brakes are divided into service brakes (foot brake) and parking brakes (handbrake). During driving, the service brake (foot brake) is generally used to slow down or stop the vehicle while moving forward, not just to keep the car stationary. The parking brake is used only when the service brake fails. When the vehicle comes to a complete stop, the parking brake (handbrake) should be applied to prevent the vehicle from sliding forward or rolling backward.

1

0

Share

How many exam attempts are allowed per subject one booking?

Each subject exam allows two attempts. If you fail twice, you need to reschedule the exam. Subject one exam content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; fundamental knowledge of safe and civilized driving; basic operational knowledge of motor vehicle driving. Subject one exam process: Follow the staff's arrangements and collect your driving school file in an orderly manner in the waiting room; Bring your ID card and undergo inspection by the supervising officer; Mobile phones must be turned off when entering the exam area; Do not make loud noises in the exam area; Legal and regulatory materials are not allowed in the exam room (or must be placed in your bag); After the exam, retain your ID card and submit your file at the "submission window" in front of the exam room. Students who pass the exam will sign at the exit under the guidance of the staff and then leave the exam room; Students who fail the exam can leave the exam room and wait for the driving school staff to notify them of the retake time.

2

Share

What Are the Reasons for a Car Not Moving?

Reasons for a car not moving include: 1. Battery depletion: The battery voltage is below the rated value, preventing the starter from operating normally; 2. Fuel flow obstruction: Long-term dirt accumulation in the fuel lines, and at lower temperatures, water mixing with debris blocks the fuel lines, resulting in no oil pressure in the engine's fuel supply pipe, causing failure to start; 3. Poor ignition system performance: Insufficient ignition energy, excessive fuel accumulation in the cylinder, exceeding the ignition limit concentration, making normal operation impossible. Solutions for a car not moving are: 1. Charge the battery; 2. Place the car in a warm environment or clean the fuel lines; 3. Check the ignition system to eliminate the cause of low ignition energy.

5

2

Share

How to Turn Off the Start-Stop Function in Audi Q5L?

Is Tire Pressure Monitoring Mandatory to Install?

Clicking Sound When Shifting Automatic Transmission?

What is the total number of cars in China?

What is the difference between service brake and parking brake?

How many exam attempts are allowed per subject one booking?

What Are the Reasons for a Car Not Moving?

What to Do When the Tire Pressure Monitoring Light Comes On?

Can the Haval F5 be started remotely?

How Often Should the Engine Belt Be Replaced?

Can the 360-degree Panoramic View Be Kept On All the Time?