How to Turn Off the Sound When Locking a Buick?

2 Answers
DiBraxton
07/25/25 8:10am
This can be done by disabling the horn prompt sound in the personalization settings. The method to turn off the locking horn sound is as follows: 1. Press the "Settings" screen button. Rotate the MENU button (located on the light control lever, not available in low-end models) and select the "Vehicle" option. Five options will appear: "Air Conditioning and Air Quality," "Lights and Door Locks," "Remote Key," "Collision Warning," and "Restore Factory Settings." 2. Select the "Remote Key" option. Remote Lock Feedback: Change the feedback type when remotely locking the vehicle. Choose among options such as "Lights and Horn," "Lights Only," "Horn Only," and "No Feedback."
Was this review help?
15
1
Share
SanDante
08/10/25 6:49pm
I've been driving a Buick for several years, and the beeping sound when locking the car can indeed be quite loud, especially when returning home late at night and not wanting to disturb the neighbors. The method to turn it off is actually quite simple: press and hold the lock button on the remote for three to five seconds, and you'll hear a short confirmation sound, indicating that the mute function has been activated. If holding the button doesn't work, or if your Buick is a model with a central control screen, you can start the car while sitting inside, then navigate to the 'Vehicle Settings' or 'Security Settings' in the screen menu, and select the 'Sound Alerts' option to turn it off. Remember, this sound is originally intended as an anti-theft reminder, so turning it off reduces some security. It's recommended to use this feature only in quiet areas. Also, don’t forget to check the vehicle manual for alternative methods and ensure the car lock system is functioning properly to avoid any issues in case of emergencies.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How to Switch Between Full Screen and Split Screen on BMW 525?

Open the driver's side door of the BMW 5 Series. Press the brake pedal to prepare to start the engine. Press the one-touch start button to start the engine and let it idle. The multifunction display will light up, and the vehicle's power will be fully connected. Press the central control display start button. After pressing the button, the multifunction display system will be ready for use. There are three options in the settings menu. Press the second option to enable split screen.
20
4
Share

How to Solve the Problem of Car Air Conditioning Sometimes Cooling and Sometimes Not

Check whether the air conditioning temperature control switch is malfunctioning and whether its circuit is loosely connected. Check whether the internal components of the air conditioning control module are malfunctioning and whether its circuit is loosely connected. Check whether there is moisture in the air conditioning pipeline, which causes icing and blockage in the pipeline when the air conditioning is working. Check whether the air conditioning expansion valve is working abnormally.
2
3
Share

How to Connect Car Amplifier Wires?

First, check if the car's head unit is the original factory model. Then find an amplifier control wire; the amplifier's connector is REM, which requires positive power. Next, connect a dedicated amplifier fuse from the positive terminal of the battery. The wire should run from the fuse to the +B terminal of the amplifier. After that, connect the ground near the amplifier to the GND terminal of the amplifier. Once installed, you can connect the speakers.
6
4
Share

How to Deal with Odors Inside the Car?

Take a lemon and slice it, then place it inside the car to neutralize the odors. When the car is not in use, you can place a small amount of vinegar in a container inside the car, or add an appropriate amount of vinegar to clean water and wipe the interior of the car. Allow the air inside the car to exchange with the outside air, enabling the odors to dissipate. You can also use the air circulation function to help remove the odors.
11
5
Share

How to Fix a Locked Front Brake on an Electric Bike?

There is a rubber cap on the front wheel brake with several screws inside. Hold the brake and loosen the screws (make sure to keep holding the brake). At this point, you will notice oil and air bubbles coming out. Once the oil stops flowing, do not release the brake—tighten the screws first, then release the brake. Repeat this process a few times to resolve the issue.
17
0
Share

How to reset the upcoming maintenance reminder for the new Mazda 3?

First, press the one-touch start button. Then press the INFO button on the left side of the multifunction steering wheel. Next, press the SET button on the right side of the steering wheel. At this point, the central LCD screen will display the vehicle maintenance information. Finally, press the OFF button at the lower right of the steering wheel, and the wrench icon will disappear.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.