···
Log in / Register

How to Turn Off the Sagitar with One-Key Start?

4 Answers
DiBrooke
07/29/25 7:49pm

The method to turn off the engine with one-key start: Press and hold the one-key start button for a few seconds to turn off the engine. Below is some related information about one-key start: 1. When installing the plug wiring, pay attention to the ignition switch. Besides the OFF position, there are commonly three positions: ACC, ON, and START. During installation, first clarify which wire or wires are connected under each position and mark them accordingly. 2. The one-key start device is part of a smart car, serving as a button device to simplify the starting process. It can also be used to turn off the engine. This device can be retrofitted at the original car key lock position or as an independent panel.

Was this review help?
8
5
Share
VonArya
08/14/25 3:24pm

Turning off the engine with the one-touch start in the Sagitar is quite simple. I noticed the pattern right after driving this car: first, safely park on level ground, shift to P or neutral, firmly press and hold the brake pedal without releasing, then lightly press the one-touch start button near the steering wheel—the engine shuts off immediately. Remember to check that all dashboard indicator lights are off before exiting the car, forming a good habit to avoid forgetting to turn it off. The one-touch start design is really thoughtful, saving key battery life—just keep the key in your pocket or bag for it to sense. I once accidentally tried to turn it off while driving, but the system’s automatic protection prevented any response, so beginners should practice a few times in an open area first. Safety comes first, and the automatic locking feature after engine shutdown is also hassle-free, reducing theft risks.

Was this review help?
17
2
Share
Expand All
OVera
10/15/25 7:34am

I usually drive my Sagitar to pick up and drop off my kids, and the shutdown operation is quick to master: park the car, shift to P gear, firmly press the brake without hesitation, then hold the start button for a second or two to stop the engine. The process is smooth, and even with dirty hands on rainy days, there's no need to fumble for keys. The one-touch start system responds sensitively, and the dashboard dims instantly upon shutdown as a success prompt. I've developed the habit of pulling the handbrake after shutting down in parking lots to ensure stability, especially on slopes. The design prevents accidental touches, and even if the key is left in the car, it beeps as a reminder. After driving for a few years, I've found that checking if the lights are off before shutting down is a good habit that extends the lifespan of parts. Occasionally on long trips, taking a short break after shutdown automatically cuts power for safety.

Was this review help?
2
0
Share
Expand All
BrodyDella
11/28/25 8:25am

Turning off the Jetta with one-button start is easy: After parking, shift to P gear, press the brake, and press the button to shut off the engine. Just make sure the key is nearby, no worries. The quick operation saves a few seconds, becomes second nature, and prioritizes safety.

Was this review help?
9
3
Share
Expand All
More Forum Discussions

What does the Buick ESC warning light mean?

Buick ESC warning light indicates that the vehicle's Electronic Stability Control system is not functioning. Here are the solutions: 1. Try restarting: When the ESC light comes on, you can try restarting the engine, then press the ESC off button on the vehicle, and finally restart again. 2. 4S store maintenance: If the Buick ESC warning light remains on after the above operations, it is recommended to go to a 4S store for inspection and repair. This is because the ESC warning light coming on is a relatively complex fault issue. It could be caused by software system alarms, sensor failures, or short circuits in the wiring. False alarms are also possible, so specialized fault diagnostic equipment is needed for troubleshooting and confirmation.
14
2
Share

Will Fuel Overflow When Refueling a Fixed Amount?

If you refuel a fixed amount, the fuel will not overflow when the tank is full. Here are the risks associated with fuel overflow: 1. Fire hazard: In hot weather, it can easily cause a fire. 2. Damage to parts: Spilled gasoline can soak surrounding components, causing certain damage. 3. Fuel tank expansion: Gasoline is volatile, and evaporation produces gases, especially when driving on bumpy roads. If the tank is filled to the point of overflow, there won’t be enough space to accommodate these gases, leading to tank expansion. If the tank’s vent is blocked, negative pressure can form inside the tank, potentially causing fuel supply issues in the vehicle.
3
3
Share

Who is Responsible for Accidents During Test Drives?

In the event of an accident during a test drive, both the test driver and the 4S store are responsible. If a collision occurs during the test drive, resulting in injury to a person or property damage, and the vehicle is uninsured, the 4S store should bear the liability within the compulsory traffic insurance limit. If the vehicle is insured, the insurance company will compensate within the mandatory third-party liability insurance limit, and the remaining losses will be shared between the test driver and the 4S store based on their respective fault. If there is evidence that the non-motor vehicle driver or pedestrian is at fault, the liability of the motor vehicle party may be appropriately reduced according to the degree of fault. If the motor vehicle party is not at fault, they will bear no more than 10% of the compensation liability. If the loss from the traffic accident is caused intentionally by the non-motor vehicle driver or pedestrian colliding with the motor vehicle, the motor vehicle party will not bear any compensation liability.
16
0
Share

Is Transmission Flush Necessary?

No need for flushing, simply replacing the transmission oil is sufficient as gear oil has a cleaning effect. Signs indicating the need for transmission oil replacement are as follows: 1. Oil quality issues: If the transmission oil shows signs of deterioration, such as turning black, becoming viscous, or emitting an odor, it should be replaced immediately. If these symptoms appear after the vehicle has been driven for an extended period; 2. Poor acceleration: If the transmission frequently experiences gear shift shocks, slipping, poor acceleration, or abnormal noises, it is advisable to replace the transmission oil. Generally, it is recommended to replace automatic transmission oil every 2-3 years or at 60,000-80,000 kilometers. Failure to replace it in time can affect the vehicle's performance, fuel consumption, and the lifespan of the transmission.
11
5
Share

What Causes High Water Temperature in Buick?

Buick high water temperature reasons include: 1. Cooling fan: The cooling fan is not rotating or has malfunctioned. 2. Cooling medium: Issues with the cooling medium, such as depleted coolant, leading to excessively high car radiator temperature. 3. Thermostat: Damaged thermostat, requiring the car to be sent to a 4S shop for repair. 4. Radiator: Radiator malfunction, necessitating replacement of radiator water or the entire radiator. Steps to resolve high engine radiator temperature: 1. Park and wait: Pull over to a safe area, set up a warning sign, open the engine hood, and turn off the engine. 2. Cool down: Wait until the engine's water temperature has sufficiently dropped before checking the engine's coolant level.
7
3
Share

Is it serious if the engine yellow light comes on without ignition?

Engine yellow light is a relatively serious warning, which alerts the driver that there is a problem with the engine-related components of the vehicle. It is recommended to promptly visit a nearby auto repair station for inspection and maintenance. The yellow light can only be cleared after the faults in the engine-related components are resolved. Below are some common engine faults: 1. Starter damage: This includes insufficient battery power, blown circuit fuses, or broken starter wires, leading to engine ignition failure. 2. Unstable working speed: The engine speed fluctuates significantly during operation, often due to gas leaks in the intake system. 3. Slow speed change during rapid acceleration: The engine speed changes slowly when the car accelerates rapidly, which may be caused by low ignition voltage or delayed ignition timing.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.