How to Turn Off the Rear Wiper on Volkswagen Tayron?

3 Answers
DeMarcus
07/29/25 6:54pm
To turn off the rear wiper on the Volkswagen Tayron, lift the wiper lever upward. Pressing it downward will activate the wiper. The rear wiper is designed for the rear windshield and is commonly equipped on SUVs, MPVs, hatchbacks, and some liftback vehicles. Precautions for using wipers: 1. Maintain cleanliness. Streaks on the windshield may indicate dirt on the wiper blades. Use a towel dampened with alcohol to wipe along the edge of the wiper blade to remove accumulated dirt, debris, and dead leaves. 2. Check the rubber. If the wiper produces a harsh noise while operating, the rubber may be aged or cracked. If the wear is not severe, you can sand down rough spots on the surface with sandpaper. 3. Avoid sunlight. A cool, ventilated area is ideal for long-term parking, as high temperatures can accelerate the aging of rubber materials. 4. Refill fluid. Plain water cannot replace windshield washer fluid. To ensure the longevity of the components, always use proper windshield washer solution.
Was this review help?
9
2
Share
VanJace
08/14/25 12:41pm
I've been driving the Volkswagen Tayron for almost three years now, and operating the rear wiper is actually quite straightforward. There's a stalk on the right side of the steering wheel—you just rotate it to control the rear wiper. If you want to turn it off while it's working, simply give the stalk a gentle twist to the off position. Sometimes it keeps moving after the rain stops, and I realize I accidentally left the wiper mode on. Normally, I make sure to turn it off promptly on sunny days or during car washes to avoid unnecessary noise and wiper blade wear. Occasionally, I check if the wiper responds properly. If issues arise, like it won't turn off, it might be a loose connection in the stalk or a fuse problem, but the Tayron's design is reliable, and manual operation usually solves it. Regular maintenance, like cleaning water stains off the glass, ensures clearer rearview visibility.
Was this review help?
2
3
Share
Expand All
OHaley
10/15/25 2:06am
When I first started learning to drive the Tayron, I was completely clueless about the rear wiper, but later I figured it out. The key to turning off the rear wiper is on the long lever on the right side of the steering wheel—just give it a gentle twist. Here’s how: first, make sure the rear wiper is active (meaning it’s moving), then locate the knob or twistable part on the lever. Rotate it slightly left or right until it stops. The first time I tried, I twisted it a few extra times before getting used to it, but after a few attempts, it became second nature. The rear wiper is very useful in the rain for clear visibility of traffic behind you, but remember to turn it off once the rain stops to save battery and prolong the wiper’s lifespan. Beginners, don’t worry—the manual has detailed diagrams, and practice makes perfect.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How is the range of the Ant 400?

The Ant 400 has a range of approximately 200 kilometers. 1. Exterior: The Ant 400 measures 3200mm in length, 1670mm in width, 1550mm in height, and has a wheelbase of 2150mm. The front design features smooth curves, with protruding sections on both sides adding a technological feel. The large, rounded headlights on both sides are highly aggressive, and the front grille has a small space below the logo, with two additional small grilles beneath the headlights, showcasing a well-thought-out design. 2. Performance: The Ant 400 is equipped with a different powertrain compared to the Ant 300, offering stronger performance and a more enjoyable driving experience. Under continuous use, the Chery Ant 400 can achieve a range of up to 301km, with a constant speed range of 410km at 60km/h.
6
4
Share

Why does water spray from the exhaust pipe when the car is running?

Normally, slight dripping from the exhaust pipe is a common occurrence. However, if water sprays from the exhaust pipe accompanied by a "puttering" sound during operation, it indicates an issue with the engine. Water spraying from the exhaust pipe could be caused by the exhaust pipe being submerged in water. Consider whether the car has traveled on muddy roads or if there is any water ingress into the vehicle. Below are the relevant explanations: 1. The principle behind water spraying from the exhaust pipe: Normally, the engine combustion process produces carbon dioxide and water vapor. When the water vapor is expelled and meets cold air, it condenses into small water droplets. These droplets accumulate at the drain hole of the exhaust pipe, resulting in visible white smoke and water droplets. 2. Reasons for the puttering sound from the exhaust pipe: Internal structural damage to the muffler; blockage in the exhaust pipe, causing changes in the flow cross-sectional area and resulting in the puttering noise; air leakage at the connection between the exhaust pipe and the muffler.
15
1
Share

What Causes Engine Shaking in a Car?

Here are the reasons for engine shaking in a car: 1. Cylinder pressure: Low cylinder pressure. 2. Blockage: Carbon deposits and oil sludge blockage. 3. Fuel injector: Clogged fuel injector. 4. Water temperature: Abnormal water temperature. 5. High-voltage line: Open circuit in the high-voltage line. Below is extended information about the causes of car shaking: 1. Insufficient power: Shaking during startup is caused by insufficient fuel combustion leading to lack of power. 2. Idling issues: Idling shaking results from severe engine carbon buildup, ignition system problems, or unstable oil pressure. 3. High-speed shaking: High-speed shaking is caused by either too high or too low tire pressure, abnormal tire wear, rim deformation, shock absorber failure, or tire imbalance. 4. Engine aging: Worn engine mounts. Engine mounts serve as the shock absorption system for the engine, absorbing minor vibrations during operation. If the engine mounts fail, these vibrations will transfer to the steering wheel and cabin, causing the car to shake.
5
1
Share

What is the difference between blue and green road signs?

Blue signs are used for general roads, while green signs are used for highways or expressways. Here are the specific details about road signs: 1. Function: The number of cars in cities increases by hundreds every day, and road resources are becoming increasingly scarce. Reasonable layout of traffic signs, increased traffic monitoring, one-way streets, and time-limited traffic restrictions all require signs to alert people. The connection and transition between various traffic facilities absolutely cannot do without road signs. 2. Significance: Analyzing the environment, understanding regional culture, local customs, architectural style, road conditions, citizen quality, regional status, number of tourists, and many other factors are comprehensively considered to determine the overall planning of the urban signage system, followed by regional subdivision.
9
3
Share

How to Fold Down the Rear Seats in Fista?

The switch to fold down the seat back is located at the top of the backrest, on the outer side of the headrest. Pull it forward to fold down the backrest. Here is the relevant introduction about folding down the rear seats: 1. Folding Method: (1) Move the front seat forward. (2) First, retract the rear seat armrest. (3) Retract the rear seat belt buckle. (4) It is best to adjust the headrest to the lowest position. (5) Pull the seat folding switch located at the shoulder of the rear seat to fold it down. 2. Adjustment Methods: (1) Lift up: Raise the seat cushion. Press down: Lower the seat cushion. Push forward: Move the seat forward. Pull back: Move the seat backward. (2) Adjust the backrest tilt angle by pushing or pulling forward and backward. Pushing forward tilts it forward, and pulling back tilts it backward. (3) Simply press the lumbar support adjustment button to adjust the height of the lumbar support area. (4) The backrest tightening button can adjust the lumbar wrapping of the seat to prevent excessive driver movement during aggressive driving. (5) To adjust the leg rest position, push or pull the leg rest control handle forward or backward.
17
5
Share

What are the causes of Audi A8 air suspension failure?

Identifying the causes of suspension failure, there are generally several reasons for air suspension malfunctions: 1. Air spring aging: Typically after 3-5 years of use, the air springs may deteriorate and require replacement. 2. Shock absorber core leakage: Since the core is the critical damping component, if it leaks oil, the repair becomes less worthwhile. 3. Malfunctions in the distribution valve or suspension compressor. Additional knowledge: 1. Can you drive with a failed air suspension: You may drive a short distance, but continued operation is not recommended as it causes uneven tire wear, imbalanced wheel load distribution, and suspension misalignment. 2. Potential consequences: This can easily damage other components and may cause functional air suspensions to fail simultaneously. Therefore, driving is not advised except in emergencies - towing is the recommended solution.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.