How to Turn Off the Rear Wiper on the Touareg?

2 Answers
DelGenesis
07/29/25 2:07am
The method to turn off the rear wiper on the Touareg is to press the wiper button once. Relevant information is as follows: 1. Front windshield: The front windshield wiper of the Volkswagen Touareg has a maintenance mode, which facilitates cleaning and replacing the wiper blades. To enter the maintenance mode, briefly turn on and then off the ignition switch, and press down the windshield wiper lever to move the windshield wiper to the maintenance position. 2. Function: In this position, the wiper arm can be lifted away from the windshield to prevent it from freezing on the windshield in winter. Please note that the maintenance mode cannot be entered if the engine hood is not properly closed. After turning on the ignition switch, the wiper will automatically return to its initial position.
Was this review help?
14
1
Share
JuliaRose
08/12/25 6:07am
I'm used to driving the Touareg, and turning off the rear wiper is pretty simple. At the end of the wiper control lever on the right side of the steering wheel, there's a small ring that can be twisted back and forth. Just turn that ring to the 'OFF' position, and the rear wiper will stop. Don't worry about getting it wrong—just try a few times and you'll get the hang of it. It's best to turn it off after the rain stops to avoid unnecessary power consumption or wear on the wiper blades. If it still moves after twisting, it might be a relay issue or a blown fuse—check the fuse box under the driver's seat, labeled 'rear wiper.' Also, remember to clean the wiper blades regularly to prevent squeaking noises, making car maintenance much easier.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

What is the ground clearance of the Honda Integra?

The ground clearance of the Honda Integra is 105mm, which means the minimum ground clearance is 10.5cm, making it a relatively low-profile vehicle. Below is relevant information about the Honda Integra's chassis: The Honda Integra's chassis consists of the powertrain system, running gear, steering system, and braking system. Its functions include: supporting and mounting the car engine and its various components and assemblies, forming the vehicle body shape, receiving the engine's power to generate motion and maintain normal driving. Consequences of damage to various components of the Honda Integra's chassis: Direct exhaust pipe rupture: The exhaust pipe is very fragile; once it ruptures, it can severely affect the car's performance and engine. Brake fluid line leakage: If the brake fluid line leaks, it can easily lead to brake failure, causing major traffic accidents and seriously threatening personal safety. Engine/transmission oil pan rupture and oil leakage: The engine relies on oil for maintenance; if the oil pan is damaged, oil leakage can cause the entire engine system to fail, rendering it unable to provide power.
4
1
Share

What are the two categories of vehicles classified under China's new standards?

Under China's new standards, vehicles are classified into two categories: passenger vehicles and commercial vehicles. Below are the relevant introductions to passenger vehicles and commercial vehicles: Passenger Vehicles: Passenger vehicles are primarily designed and technically configured for transporting passengers along with their personal belongings or temporary items, with a maximum seating capacity of nine, including the driver's seat. Passenger vehicles may also tow a trailer. They encompass sedans, micro buses, and light buses with no more than nine seats. Passenger vehicles are further subdivided into basic passenger vehicles (sedans), multi-purpose vehicles (MPVs), sport utility vehicles (SUVs), special-purpose passenger vehicles, and crossover passenger vehicles. Commercial Vehicles: Commercial vehicles refer to MPV models, which are multi-purpose vehicles combining the functionalities of sedans, station wagons, and vans. These vehicles feature significantly adjustable second-row seats, providing a very comfortable ride, and possess strong modification potential.
6
5
Share

How long does it take to obtain a Class D driver's license?

Generally, it takes about one month to obtain a motorcycle driver's license. License differences: Taking the motorcycle license test is different from the ABC class driver's license tests, as all subjects can be completed on the same day. The cost of the test is not fixed, ranging from a few hundred yuan in some places to over a thousand yuan in others, depending on the location. Exam precautions: Candidates must enter the examination room with their ID card and admission ticket to take the test. During the answering process, the keystrokes should be moderate, with gentle clicks. If the keys are pressed too hard or for too long, it may result in continuous answers. If this happens, you can press the 'Previous Question' button to return to the original answering interface and re-answer the question.
4
5
Share

Is it normal for the VV7 engine to make abnormal noises?

It is normal for the VV7 engine to make abnormal noises. Since the engine is a direct injection engine, the fuel is injected directly into the cylinder during operation. Additionally, the direct injection engine is equipped with a high-pressure pump, which can produce abnormal noises during operation. This is considered a normal phenomenon. Causes of abnormal engine noises in cars: 1. Aging engine mounts: Engine mounts are rubber blocks placed between the engine and the frame. Their purpose is to reduce vibrations and provide cushioning during engine operation while securing the engine in place. Once these mounts age or become loose, the engine may shake, leading to abnormal noises. 2. Engine misfire: This mainly refers to one or more cylinders not functioning properly. The exhaust gas flow will show noticeable interruptions, and the exhaust pipe may shake significantly. This phenomenon is often related to issues with the ignition coil. 3. Poor lubrication: Due to insufficient lubrication, excessive wear may occur between the piston and cylinder wall, causing the clearance between them to exceed normal tolerances. This results in noticeable knocking sounds during idle or low-speed operation. 4. Overly rich fuel mixture: When the engine's air-fuel mixture is too rich, it may be difficult to start. After starting, acceleration may be sluggish, and the engine may run unevenly. The exhaust pipe may emit black smoke, accompanied by popping or knocking noises. Methods for diagnosing abnormal engine noises: 1. Manual inspection: This mainly involves using a stethoscope, performing a cylinder cut-off test, and adjusting the throttle opening to listen and observe changes in abnormal noises. During the inspection, it is also important to monitor the color and volume of exhaust smoke and the readings of various gauges. 2. Instrument diagnosis: Since different types of engine noises and vibrations have distinct sound levels, pressures, and amplitudes, any wear in engine friction pairs, increased clearance, or loosening of components can produce abnormal noises and vibrations. These can be reflected through specialized diagnostic instruments.
16
5
Share

What is the Lane Change Assist Function?

Lane Change Assist is a driving assistance system. When a driver attempts to change lanes, if there is a vehicle in the rear, an indicator light will illuminate on the car's rearview mirror. In some vehicles, the steering wheel may also vibrate, enhancing driving safety. Introduction: Besides Lane Change Assist, common driving assistance systems include Lane Keeping Assist. If the car's wheels cross a solid line while driving within a lane, a warning will appear inside the vehicle. ACC Adaptive Cruise Control: ACC Adaptive Cruise Control is another common driving assistance system, developed from conventional cruise control. The ACC system can automatically brake when the distance to the vehicle ahead becomes too close. In traffic jams, activating Adaptive Cruise Control enables automatic follow-up driving.
19
2
Share

How many kilograms is one liter of 92-octane gasoline?

One liter of 92-octane gasoline weighs 1.46 kilograms. Gasoline density: The weight varies depending on the density of the oil product. The density of gasoline changes slightly with seasonal climate variations, with the average as follows: 90-octane gasoline has an average density of 0.72g/ml, which is 0.72kg/L; 93-octane gasoline has a density of 0.725g/ml, which is 0.725kg/L; 97-octane gasoline has a density of 0.737g/ml, which is 0.737kg/L. Gasoline characteristics: The heat value of gasoline is approximately 44,000 kJ/kg (the heat value of fuel refers to the heat generated by the complete combustion of 1kg of fuel). Important characteristics of gasoline include volatility, stability, anti-knock properties, corrosiveness, and cleanliness. In the engine cylinder, gasoline must rapidly vaporize and form a uniform combustible mixture with air, which is primarily determined by the gasoline's own volatility.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.