How to Turn Off the Rear Wiper on the Tayron?

2 Answers
DiMadelyn
07/25/25 5:56am
To turn off the rear wiper on the Volkswagen Tayron, lift the wiper lever upward. Pressing it downward activates the wiper. Below are some maintenance tips for wipers: 1. When using the wiper to remove dust from the windshield on sunny days: Always spray windshield washer fluid first; never operate the wiper dry. 2. If there are stubborn or hard contaminants on the glass: Remove them manually, as these can damage the wiper blade, leading to ineffective cleaning. In severe cases, the wiper motor may also be affected. 3. When lifting the wiper blade during car washing or routine cleaning: Hold the "backbone" of the wiper blade and gently return it to its position. Avoid snapping the blade back abruptly. 4. During winter use: First, use an ice scraper to remove ice chunks from the windshield to prevent overburdening the wiper. 5. If contaminants on the wiper are hard to remove or the wiper itself malfunctions: Seek professional repair as soon as possible.
Was this review help?
2
0
Share
MacLawson
08/10/25 5:58pm
It took me over half a year of driving the Tayron to finally figure out how to turn off the rear wiper, but it's actually quite simple. On the wiper control stalk on the right side of the steering wheel, you see that rotatable knob? It specifically controls the rear wiper. Just rotate it clockwise or counterclockwise to the end until you hear a click, and when the rear wiper icon on the dashboard goes off, it means it's turned off. Remember, sometimes the rear wiper automatically turns on when you shift into reverse gear. In this case, it will turn off by itself when you drive forward, but if it doesn't, you'll need to manually twist it back. After using it more, I also discovered a little trick: you can press the middle of the knob to spray washer fluid, which is super convenient for cleaning the rear window.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

Where is the air conditioning filter located in the Nissan Tiida?

The air conditioning filter in the Nissan Tiida is located in the middle of the instrument panel. The functions of the air conditioning filter are: 1. To provide fresh air; 2. To adsorb harmful substances; 3. To filter solid impurities. Taking the 2021 Nissan Tiida as an example, it belongs to the compact car category, with body dimensions of: length 4393mm, width 1766mm, height 1539mm, wheelbase of 2700mm, fuel tank capacity of 50 liters, and curb weight of 1180kg. The 2021 Nissan Tiida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, maximum power of 90kW, and maximum torque of 155Nm, paired with a 5-speed manual transmission.
2
1
Share

What is the difference between multi-link independent suspension and E-type multi-link independent suspension?

The differences between multi-link independent suspension and E-type multi-link independent suspension are: 1. Different composition: Multi-link suspension consists of links, shock absorbers, and damping springs; E-type multi-link suspension is a suspension structure composed of three or more connecting rods. 2. Different systems: Multi-link suspension belongs to the double-wishbone suspension and multi-link suspension system; E-type multi-link suspension is an improvement of the double-wishbone suspension and is not entirely considered a double-wishbone type. Suspension is the general term for all force-transmitting connection devices between the car's frame and the axle or wheels. Its functions are: 1. To provide cushioning when the vehicle passes over uneven ground; 2. To ensure that the wheels move within a fixed angle, making steering stable; 3. To support the weight of the wheels; 4. To maintain good contact between the wheels and the ground, ensuring that the driving force and braking force generated between the wheels and the ground are accurately transmitted to the body.
8
4
Share

How to Deal with the Unpleasant Odor in Peugeot 308's Air Conditioning?

Methods to address the unpleasant odor in Peugeot 308's air conditioning: Use an air conditioning duct cleaner to clean the system. Spray the cleaner into the duct from the filter position, then turn on the air conditioning to the highest setting, open the windows, and run it for a few minutes. Solution for air filter odor: It is recommended to replace the air filter once a year, but if the air conditioning is used frequently or the external environment is extremely poor, replacing it every three months is also feasible. The Peugeot 308 is a compact car. The first-generation Peugeot 308 model was equipped with a 120-horsepower 1.6L inline 4-cylinder gasoline engine transplanted from the 207 model, paired with Michelin tires sized 215/55R16. The Peugeot 308's large panoramic sunroof provides excellent lighting inside the car, with a standard trunk space of 430 liters, expandable up to 1398 liters. Additionally, there are a total of 42 liters of storage space distributed throughout the car.
10
4
Share

Where is the Cruze reversing radar?

The control box of the Cruze reversing radar is located under the instrument panel. Method for installing an additional reversing radar on the Cruze: 1. Install four radars at the rear of the car. First, use measuring tools to determine the installation positions of the probes and mark them. 2. Prepare an electric drill. 3. Install the provided special drill bit on the electric drill and drill holes at the marked positions from the previous step. The holes should match the size of the probes. 4. Connect the probes to the wiring harness and install them in the corresponding drilled holes. 5. Organize the wiring harness of the probes and route it to the trunk. 6. Install the front two probes, and use the same method to install the rear probes. 7. Route the wiring harness of the front probes to the brake position of the driver's seat and connect it to the trunk through the door gap. 8. Then connect the red wire to the reversing wire and the white wire to the brake wire. 9. Connect the display, probe wiring, etc., to the main unit, and use adhesive tape to fix and hide the main unit on the inner side to complete the installation.
8
1
Share

How to Identify Whether a Car is from Stock?

Methods to identify whether a car is from stock include: 1. Check the production nameplate: Located below the B-pillar on the right side of the vehicle, the nameplate displays information such as the production date and engine parameters; 2. Inspect the glass: The production date and year of the glass are marked on the car windows; 3. Examine the tires: Determine the manufacturing time by checking the production date of the tires; 4. Open the engine compartment: Start the engine and check if it is clean. Considerations when purchasing a car are: 1. Choose the brand and model; 2. Select the price range; 3. Communicate rationally with the salesperson; 4. Choose the configuration; 5. Pay attention to the contract; 6. Verify if all relevant car documents are complete; 7. Inspect the exterior paint and interior for any damage; 8. Check if the production date on the vehicle nameplate matches the related documents; 9. Ensure the engine operates normally and basic vehicle functions are working properly.
16
3
Share

How to Adjust the Dashboard Clock on Volkswagen Tiguan?

The method to adjust the dashboard clock on Volkswagen Tiguan is as follows: 1. First, press the button at the bottom left of the dashboard to select the hour or minute display. 2. Then, press the button at the bottom right of the dashboard to quickly adjust the time. Finally, press the button at the bottom left of the dashboard again to complete the setting. Below is an introduction to the Volkswagen Tiguan: 1. Exterior: The Tiguan adopts Volkswagen's latest family design philosophy. 2. Interior: The Tiguan features a combination of stable black and warm beige as the main color scheme for the interior. Black effectively avoids "glare," while beige gives a cozy feeling. 3. Powertrain: There are two engine options available: 1.4T and 1.8T. The 1.4T engine delivers a maximum power of 150 horsepower and a peak torque of 250 Nm, paired with a 6-speed dual-clutch transmission. The 1.8T engine offers a maximum power of 160 horsepower and the same peak torque of 250 Nm, paired with a 6-speed automatic transmission.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.