How to turn off the rear wiper on the Q3?

3 Answers
LaPresley
07/29/25 11:39pm
Method to turn off the rear wiper on the Q3: Pulling the wiper switch inward activates the front wipers, while pushing it outward activates the rear wiper. When in the rear wiper position, push the switch upward to turn off the rear wiper. Wipers, also known as windshield wipers or windscreen wipers, are devices used to remove rain and dust from the vehicle's windshield, improving driver visibility and enhancing driving safety. The Q3 is an SUV based on the same PQ35 platform as the Volkswagen Tiguan, positioned below the Q7 and Q5 in the Audi model lineup. In terms of body dimensions, the Audi Q3 measures 4385mm in length, 1831mm in width, and 1608mm in height.
Was this review help?
11
4
Share
CorbinLynn
08/16/25 2:47am
When driving my Q3 or similar SUVs, turning off the rear wiper is usually straightforward. It primarily relies on the knob on the wiper control stalk—typically located at the end of the right-hand stalk on the steering wheel. You just need to rotate this small dial to the area marked OFF to immediately stop the rear wiper movement. I find this design very user-friendly, requiring just a gentle twist of the finger to operate. While driving, if the rain stops or the fog clears, turning it off promptly can reduce unnecessary battery drain and mechanical wear. Additionally, I often check if the wiper blades are clean, wiping them with a soft cloth to prevent dirt buildup, ensuring smoother operation the next time it rains and extending the wiper’s lifespan. Don’t overlook forming the habit—just confirm it’s turned off before parking.
Was this review help?
1
3
Share
Expand All
Alexa
10/19/25 3:24am
As an experienced daily driver, I've also encountered the minor annoyance of not being able to turn off the rear wiper. Looking back, it's actually super simple to operate on an Audi Q3: just rotate that small wheel on the wiper control stalk (usually a circular paddle) all the way to the left or right to the position marked OFF. Turning off the rear wiper has many benefits - for example, keeping it on during sunny days increases wind resistance and makes the car noisier; turning it off when the rain stops helps save power. I make it a habit to check the settings when the dashboard lights are on, and I clean the wiper rubber blades every season with warm water and a cloth to remove dust and prevent aging. These small details make driving more comfortable and effortless - don't overcomplicate it.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

How does Tesla Supercharging billing work?

Tesla offers 400 kWh of free charging credit in the first year, which is only applicable to the vehicle itself and cannot be transferred or refunded. After exceeding the 400 kWh limit, fees will be automatically deducted from the credit card linked to the Tesla account. Below are detailed explanations about it: 1. Explanation one: The 400 kWh of free charging credit per year cannot be carried over to the next year if unused. On each annual delivery anniversary, the vehicle's free Supercharger credit will be reset to 400 kWh. 2. Explanation two: If the vehicle continues to occupy a Supercharger parking spot after charging is completed, a certain idle fee will be charged.
4
3
Share

Can dents at the edges of a car be repaired without leaving marks?

Dents at the edges of a car can be repaired without leaving marks if they are not severe. Here is some relevant information about car dent repair technology: 1. Definition: Paintless dent repair (also known as vehicle dent repair) refers to a technique that restores the dented and deformed parts of a car body while preserving the original paint. 2. Advantages: Car dent repair can retain the original paint, reduce repair time and costs, is not restricted by location, and does not alter the vehicle's key safety parameters. 3. Applicability: Car dent repair technology is not only suitable for small-area dent repairs but can also be used to repair certain characteristic large-area dent damage.
5
5
Share

What does the Mercedes-Benz poff button mean?

Mercedes-Benz poff button is the control switch for the parking radar. Below is relevant information about the parking radar: 1. Introduction: The parking radar system, also known as the parking assistance system, informs the driver of surrounding obstacles through sound and visual display. It eliminates the troubles caused by the driver's need to look around when parking, reversing, or starting the vehicle, helping the driver to clear blind spots and improve driving safety. 2. Working Principle: The parking radar uses ultrasonic detection, similar to the principle that bats can fly at high speed at night without colliding with any obstacles.
9
4
Share

What are the methods and sequence for car paint polishing?

Here is an introduction to the methods and sequence of car paint polishing: 1. Wash the car: Before polishing, it is essential to thoroughly clean the car body to remove dust particles, preventing secondary damage to the paint. 2. Sanding: After washing the car, perform a rough sanding on the body. Depending on the size of surface imperfections or scratches, use water sandpaper of different sizes for sanding. 3. Polishing: After sanding, select an appropriate polishing machine along with polishing wax to perform detailed polishing on the sanded body. 4. Mirror restoration: After polishing, use a mirror treatment agent to restore the mirror-like effect of the car body, followed by waxing and shining.
1
4
Share

What is the issue when the brake pedal goes all the way to the floor with one step?

There are mainly three reasons that can cause the brakes to feel soft: 1. Air in the brake fluid reservoir: If the brake fluid has just been replaced, it is likely that the mechanic did not fully bleed the air from the brake lines. Air in the lines will make the vehicle's brakes feel weak and ineffective. 2. Severely worn brake pads: When brake pads wear down, their overall thickness becomes thinner, requiring the driver to press the brake pedal deeper to achieve the original braking effect. 3. Insufficient brake fluid: Check the brake fluid level in the reservoir to ensure it is between the MAX and MIN marks. If the brake fluid is below the MIN mark, it indicates insufficient brake fluid.
5
2
Share

How to Use the Brake Assist Function?

Brake assist function is used as follows: 1. Prevent wheel lock-up: It can be used to prevent wheel lock-up when braking. During vehicle braking, axial load transfer occurs, automatically adjusting the front and rear axle braking power distribution ratio to improve braking efficiency. It detects the driver's braking action and increases braking force during emergency braking to shorten stopping distance. 2. Avoid loss of control: When the vehicle experiences wheel slip, tilt, or tire loss of traction moment, it purposefully applies braking control to individual wheels while reducing engine speed, ultimately guiding the vehicle back to normal driving trajectory to prevent dangers caused by loss of control. 3. Stabilize the vehicle: By controlling the magnitude of driving force, it reduces the slip rate of drive wheel tires, prevents jolting, and helps the vehicle maintain stability.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.