How to Turn Off the Rear Wiper on a Mercedes-Benz?

1 Answers
LeMalachi
07/25/25 2:52am
First, open the car door and press the one-touch start button to power on the vehicle. Then, pull the lever backward one gear to find the middle OFF position and turn off the rear wiper.
Was this review help?
16
2
Share
More Forum Discussions

Automatic Transmission: One Foot or Two Feet?

Driving an automatic transmission car requires using one foot. More information about driving an automatic transmission car is as follows: 1. Driving an automatic transmission car with two feet may lead to more serious traffic accidents. Novice drivers should develop good habits and avoid using both feet while driving an automatic transmission car. 2. Automatic transmission cars do not have a clutch pedal. They only have a brake pedal and an accelerator pedal. When driving an automatic transmission car, the right foot controls both the brake and accelerator pedals. 3. When braking, release the accelerator pedal and press the brake pedal. 4. Drivers of automatic transmission cars only need to shift into D gear and control the speed and direction.
20
4
Share

What does the car emblem 'evans' mean?

evans on the back of a car indicates that the vehicle uses Evans waterless coolant. Waterless coolant, also known as waterless cooling oil or automotive cooling oil, is a new type of automotive consumer product. It features zero corrosion and no formation of water rust, eliminating the need for cleaning or repairing the radiator after use, significantly reducing maintenance and the occurrence of faults. Main benefits of waterless coolant: Anti-corrosion: Prevents the engine from freezing at temperatures above the engine's minimum operating temperature, prevents internal rusting of the engine, and protects the radiator and cooling system metals from rusting. Additionally, the cooling system operates under very low pressure, allowing the radiator cap to be opened at any time. Increased power: Eliminates the thermal barrier caused by water vapor, resolves localized overheating in the engine, and releases the engine's power potential. Faster acceleration: Shortens acceleration distance, makes acceleration smoother, and improves gear shifting connectivity. Fuel savings: Being waterless and having slower heat dissipation, it allows the engine to warm up quickly during cold starts, reaching operating temperature faster. This reduces startup fuel consumption. High boiling point, low freezing point: Resolves issues of freezing and expansion at low temperatures and boiling over at high temperatures. Thermal balance: Exceptional thermal conductivity, with viscosity changing according to temperature, balances the internal temperature of the engine. Reduced emissions: Improves engine operating conditions, ensures more complete combustion, lowers emissions, and reduces engine noise. Less maintenance: Prevents corrosion inside the engine's cooling system, reduces maintenance needs, and extends the engine's lifespan.
4
5
Share

How to Remove Cement Stains from a Car?

Methods for removing cement stains from a car are as follows: 1. Deal with it promptly before it hardens: Wet and rinse with clean water, then use a towel with cleaning solution to wash. 2. Use an acidic solution for cleaning, such as white vinegar. Pour white vinegar onto the cement, wait a few minutes for the cement to soften, and then wash repeatedly. Avoid scraping or rubbing randomly to prevent damage to the car paint. 3. Purchase a cement cleaner for washing: Pour the cement cleaner onto the cement, wait a few minutes for the cement to soften, and then wash repeatedly. 4. Small areas of cement can be cleaned by yourself, but for large areas, it is recommended to go to a professional car wash.
4
2
Share

What Causes the Battery Light to Occasionally Illuminate While Driving?

The battery light occasionally illuminating while driving is mainly due to reasons such as a loose belt or tensioner pulley, worn generator carbon brushes, faulty generator voltage regulator, loose battery terminals, or faulty battery sensor. Loose Belt or Tensioner Pulley: The generator is driven by a belt and pulley on the engine, and the tensioner pulley's role is to keep the belt tight to prevent slipping. Over time, the belt may stretch, and the tensioner's tension may decrease, causing the belt to slip, especially during acceleration. A slipping belt may fail to drive the generator, causing it to stop working temporarily. In this case, the belt needs to be reinforced and tightened. Worn Generator Carbon Brushes: The generator's carbon brushes, which constantly rub against the rotor, can wear out over time, leading to abnormal generator operation and failure to charge the battery. Solution: Replace the generator carbon brushes. Faulty Generator Voltage Regulator: The voltage regulator is integrated with the generator and functions to convert the AC current generated by the generator into DC current. Additionally, as engine conditions vary, the speed fluctuates, causing the AC voltage from the generator to fluctuate. The regulator stabilizes this voltage. Solution: Replace the voltage regulator. Loose Battery Terminals: If the battery terminals are not tightened properly, the vibrations during driving may cause poor contact, preventing the battery from charging. Solution: Tighten the battery terminals. Faulty Battery Sensor: The battery sensor detects the generator's charging voltage and works with the regulator to ensure stable voltage is delivered to the battery. Solution: Replace the battery sensor. Battery Maintenance Methods: Keep the battery clean and dry, and ensure the vent holes are unobstructed. If oxides appear on the plates or terminals, clean them and apply a small amount of grease to prevent corrosion. Avoid continuous use of the starter motor. Each use should not exceed 5 seconds, with a 10-15 second break between two starts. In severe winter, the battery discharge level should not exceed 25%, and in summer, it should not exceed 50%. A battery filled with electrolyte should not be left in a state of insufficient charge for long periods. Charge it regularly to avoid permanent damage.
16
5
Share

Why can't the car key start the engine?

Reasons and solutions for the car key failing to start the engine are as follows: 1. Insufficient fuel, the car lacks a power source. Solution: Refuel. 2. Incorrect gear position: The gear is in R or another position. Solution: Generally, shifting to P or N gear will solve the issue. 3. Circuit or electronic failure. Solution: Contact a professional for repair as soon as possible. 4. Fuel system failure: Fuel pump malfunction, blocked fuel line, clogged fuel filter, spark plug carbon buildup, or damaged fuel injector. Solution: Contact a professional for repair as soon as possible.
5
2
Share

How to Maintain a New Car Battery?

The maintenance methods for a new car battery are as follows: 1. The car should not be left idle for long periods. A car that is not used for an extended time will gradually lose battery charge, which may lead to difficulty starting the car when needed. If the car is used infrequently, it is advisable to drive it periodically to keep the battery fully charged. 2. Avoid using electrical devices after turning off the engine. For example, listening to music while the engine is off consumes the battery's power. Prolonged use can drain the battery completely, resulting in failure to start the car. It is recommended that owners refrain from using electrical devices after turning off the engine. 3. Clean and maintain the battery. Regularly clean the car battery by wiping the positive and negative terminals with a dry cloth to remove dust, grease, white powder, and other contaminants that may cause leakage. Avoid using a wet cloth to prevent electric shock. If owners find it difficult to perform these tasks, it is recommended to visit a 4S store or a professional repair facility for assistance.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.