How to Turn Off the Rear Wiper on a Ford Vehicle?

1 Answers
MacHarley
07/29/25 4:09pm
Ford vehicle rear wiper turning off method: For hatchback models, the wiper switch is located on the wiper control stalk on the right side of the steering wheel. You can turn off the rear wiper by moving the stalk forward or backward while controlling the front wipers by moving it up or down. Additional information about wipers is as follows: 1. The rear wiper is the wiper for the rear windshield, commonly equipped on SUVs, MPVs, hatchbacks, and some liftback vehicles. 2. The impact of high-speed airflow must be considered before installing a rear wiper. 3. Wipers are important accessories installed on the windshield, designed to clear rain, snow, and dust that obstruct visibility. Thus, wipers play a crucial role in driving safety.
Was this review help?
7
3
Share
More Forum Discussions

How to Turn on the Heater in a Passat During Winter?

To turn on the heater in a Passat during winter, follow these steps: 1. After starting the engine, wait 5 to 10 minutes for the water temperature to reach normal levels before activating the heater; 2. Adjust the air conditioning circulation mode to internal circulation; 3. Switch to the heating mode by turning the knob to the red zone; 4. Set the air conditioning to an appropriate fan speed. The Passat is a mid-size sedan equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150 HP, paired with a 7-speed dual-clutch transmission. The vehicle's dimensions are 4933mm in length, 1836mm in width, and 1469mm in height, with a wheelbase of 2871mm. It has a top speed of 210 km/h and comes with 215/60R16 tires.
19
0
Share

What level of SUV is the Qashqai?

The Qashqai is a compact SUV with dimensions of 4401mm in length, 1837mm in width, and 1593mm in height, and a wheelbase of 2646mm. It features a 5-door, 5-seat body structure. The front fascia of the Qashqai includes a wide grille with chrome accents and cooling vents, along with two arched bulges on the engine hood that complement the irregular polygonal headlights. The side profile features a curved waistline that runs along the lower edge of the side windows, extending from the front to the taillights. In terms of configuration, the Qashqai is equipped with a 1.2L turbocharged engine paired with a CVT transmission that simulates 7 gears. Its suspension system consists of a MacPherson strut front suspension and a multi-link independent rear suspension.
6
0
Share

What does OPS mean?

OPS stands for the Optical Parking System, commonly known as the Parking Assistance System, which is a functional extension of parking radar. The working principle of the Optical Parking System is as follows: it analyzes, processes, and calculates the ultrasonic signals reflected back from obstacles received by the ultrasonic sensors of the parking radar, calculates the distance between the obstacle and the car, and then determines the relative position of the obstacle compared to the car. It displays an animated simulation image on the car's navigation screen. The colors of the Optical Parking System represent the distance between the obstacle and the rear of the car. A green line indicates a greater distance between the obstacle and the rear of the car, a yellow line indicates a distance of 60cm between the obstacle and the rear, and a red line indicates a distance of 30cm between the obstacle and the rear. When reversing, the closer to the red line, the shorter the distance.
11
4
Share

What is the Difference Between Wet and Dry Dual-Clutch Transmissions?

Wet and dry dual-clutch transmissions differ in the following ways: 1. Power transmission method: Wet dual-clutch transmissions use oil for power transmission, while dry dual-clutch transmissions rely on air. 2. Clutch mechanism: In a wet dual-clutch transmission, the clutch plates are immersed in transmission fluid, whereas in a dry dual-clutch transmission, the clutch plates are not submerged in transmission fluid. The clutch is located within the flywheel housing between the engine and the transmission, secured to the rear plane of the flywheel with screws. The output shaft of the clutch serves as the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby interrupting or transmitting the engine's power to the transmission.
20
5
Share

How to check the remaining fuel level in an Audi A3?

Audi A3 fuel level checking method: The fuel gauge display of this car is integrated with the speedometer, appearing as a white dotted line. The illuminated segments indicate the remaining fuel quantity - more illuminated segments signify sufficient fuel reserve. When the tank is full, all segments on the white dotted line will be illuminated. When only 1-2 segments remain lit, it indicates low fuel level requiring timely refueling. The Audi A3 is a sedan product manufactured by Audi, with dimensions of 4292mm (length) × 1765mm (width) × 1423mm (height) and a wheelbase of 2578mm. Regarding suspension, the Audi A3 features MacPherson strut front suspension and multi-link independent rear suspension.
3
0
Share

How to Remove the Maintenance Reminder on a Car?

Eliminating the maintenance reminder on a car can be done by: 1. Visiting a 4S shop to cancel it using the computer system; 2. Canceling it through vehicle settings, as the method to remove the maintenance reminder varies for different cars. The original intention of the car maintenance light is to remind the owner to perform maintenance as soon as possible. The owner should promptly visit a 4S shop for maintenance, after which the maintenance light will be reset using a fault diagnostic tool. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Modern car maintenance mainly includes the maintenance scope of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of car maintenance is to keep the car clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.