How to Turn Off the Rear Wiper on a Car?

2 Answers
DelSimon
07/24/25 11:57pm
To turn off the rear wiper on a car, follow these steps: 1. Turn the vehicle's ignition key to power on the car; 2. Locate the wiper control lever beneath the steering wheel; 3. Push the lever outward twice to set it to the 'off' position. The function of the wiper is to clear rain, snow, and dust from the windshield, enhancing driving safety. Steps to replace the wiper: 1. Lift the metal wiper arm away from the front windshield; 2. Press the plastic tab at the contact point between the rubber wiper blade and the metal arm to remove the old wiper blade; 3. Insert the new wiper blade.
Was this review help?
16
3
Share
VonJames
08/10/25 3:33pm
Turning off the rear wiper is actually quite simple. It's usually operated via the control stalk on the right side of the steering wheel. After driving for over ten years, I habitually turn that stalk to the "OFF" position. Some vehicles have button controls, which can be found near the center console or door handles. During rainy days, turn it on when needed and switch it off when the rain stops to prevent wiper blade wear and save some battery power. Regularly check if the wiper rubber is worn out – if there's unusual noise or skipping, it's time to replace them. For safety, it's best to operate it when parked to avoid driving distractions.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What is the proper adjustment position for the rearview mirrors of the Volkswagen New Lavida?

Here are the detailed instructions for adjusting the rearview mirrors of the Volkswagen New Lavida: Adjusting the rearview mirror buttons: You can adjust them using the electric buttons inside the car, which are located on the left side of the steering wheel, allowing adjustments for both the left and right rearview mirrors. Adjusting the center rearview mirror: Adjust the left and right positions so that the left edge of the mirror just cuts off the right ear of your reflection, and the up and down positions should place the distant horizon at the center of the mirror. The key points for adjusting the center rearview mirror are to place it horizontally in the middle and position the ear reflection on the left. The distant horizon should be aligned with the centerline of the mirror, and then move it left or right so that the reflection of your right ear is just at the left edge of the mirror. Adjusting the left rearview mirror: For the up and down positions, place the distant horizon at the center, and for the left and right positions, adjust so that the car body occupies 1/4 of the mirror's surface. The key points for adjusting the left rearview mirror are to place the horizon at the centerline of the mirror and adjust the car's edge to occupy 1/4 of the mirror's reflection. Adjusting the right rearview mirror: Since the driver's seat is on the left, it's not as easy to monitor the right side of the car. Additionally, for roadside parking needs, the right rearview mirror should have a larger ground area when adjusting the up and down positions, occupying about 2/3 of the mirror's surface. For the left and right positions, adjust so that the car body occupies 1/4 of the mirror's surface. The key points for adjusting the right rearview mirror are to place the horizon at the 2/3 position of the mirror and adjust the car's edge to occupy 1/4 of the mirror's reflection.
11
2
Share

What are the differences between the 2018 and 2019 Lavida models?

Here are the specific differences between the 2018 and 2019 Lavida models: Emission standards: Most 2018 Lavida models comply with the China V emission standard, with a few classic models meeting the China VI standard. All 2019 models meet the China VI emission standard, except for the 2019 1.5L Auto Vision Edition, which still adheres to the China V standard. Below is additional information about the Volkswagen Lavida: Interior features: Higher-end models include ambient lighting. Depending on the trim level, the Lavida offers features such as ACC adaptive cruise control, an 8-inch central touchscreen, automatic dual-zone climate control, air filtration, heated seats, an electronic parking brake, and auto hold. Powertrain: The Lavida is equipped with two engines from the EA211 series: a 1.6L and a 1.4T. These engines deliver maximum power outputs of 85kW (116PS) and 110kW (150PS), with peak torques of 150N·m and 250N·m, respectively.
10
1
Share

What is the actual fuel consumption of the Baojun 530?

The actual fuel consumption of the Baojun 530 is 7.9L/100km. Here are the specific details about the BMW 5 Series models: Model Positioning: The BMW 5 Series is a mid-to-large luxury sedan under the BMW brand. It is a C-segment sedan, competing with models like the Mercedes-Benz E-Class, Audi A6L, and Cadillac CT6. The BMW 5 Series is available in both standard wheelbase and long wheelbase versions, with the long wheelbase version being domestically produced and the standard wheelbase version being imported. Powertrain: The domestically produced BMW 5 Series uses two engines: a low-power 2.0-liter turbocharged engine and a high-power 2.0-liter turbocharged engine. The low-power 2.0-liter turbocharged engine has a maximum power output of 135 kW and a maximum torque of 290 Nm, paired with an 8-speed automatic transmission (8AT). The high-power 2.0-liter turbocharged engine delivers 252 horsepower and a maximum torque of 350 Nm, also paired with an 8AT. The 8AT transmission used in the BMW 5 Series is sourced from ZF. Suspension Type: The BMW 5 Series features a double-wishbone independent front suspension and a multi-link independent rear suspension.
18
3
Share

What is the fuel consumption of the Prado 4000?

The Prado 4000 has a fuel consumption of approximately 14 liters per 100 kilometers. Here are the specific details about the Toyota Prado: Vehicle Positioning: The Prado is an imported ORV launched by FAW Toyota, the latest model in the Toyota Land Cruiser series. Power Specifications: The Prado is equipped with a 2.7L naturally aspirated engine, paired with either a 4-speed automatic or 5-speed manual transmission. Suspension System: It features a non-load-bearing frame with a front double-wishbone independent suspension and a rear four-link suspension structure, enhancing the vehicle's torsional and bending rigidity. It comes standard with large 265/65R17 tires, along with Toyota's four-wheel-drive system and a central differential lock, balancing off-road capability and urban driving comfort.
12
3
Share

When to Use Each Gear in the Mercedes-Benz C200L?

Here are the detailed instructions for using the gears in the Mercedes-Benz C200L: P Gear: The parking gear is typically used for long-term parking. The vehicle should be stationary when shifting into the parking gear. R Gear: The reverse gear is located behind the parking gear and requires the vehicle to be stationary before shifting into it. N Gear: The transmission is in neutral, meaning no power is transmitted to the wheels, and the engine braking effect is unavailable. D Gear: The automatic transmission operates automatically during driving, with the driver only needing to control acceleration and deceleration. S Gear: In sport mode, the engine's RPM is kept higher to achieve better performance, and the transmission's shifting logic becomes more aggressive. L Gear: The low gear is one of the forward gears and can be used during long or steep descents, but care should be taken not to let the engine RPM get too high. M Gear: Manual mode provides more driving enjoyment and better adaptability to complex road conditions. B Gear: This gear is commonly found in pure electric and hybrid models. The B gear can assist in charging the vehicle's battery through coasting and also provides braking force during long descents.
12
3
Share

Why Does Fuel Consumption Increase After an Oil Change?

Reasons for increased fuel consumption after an oil change: Higher viscosity of new oil: Over time, used oil deteriorates, leading to a decrease in viscosity, which reduces engine resistance. New oil has higher viscosity compared to the old oil, resulting in perceived increased fuel consumption or reduced power. Insufficient power: This could be due to issues with the car's engine, where the engine lacks sufficient power. Faulty oil filter: If the oil filter is faulty, clogged, or ineffective, it is generally recommended to replace the oil filter along with the new oil. Excessive deposits: If the engine lubrication system hasn't been cleaned for a long time, deposits accumulate. Changing to new oil may dislodge some impurities, suspending them in the oil and clogging the oil filter, leading to insufficient power.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.