How to turn off the rear wiper of the T-ROC?

1 Answers
McDamian
07/30/25 5:35am
To turn off the rear wiper of the Polo, first, you need to enter the car and locate the specific position of the rear wiper lever. After finding the specific position, note that the wiper's speed can be adjusted by switching between different gears to achieve different wiping frequencies. There is a control knob on the wiper controller. By twisting the head of the control button and gently lifting it upwards, you can turn off the rear wiper. If the wiper switch has already been pressed downward, simply push the wiper switch vertically upwards to its original position to turn it off.
Was this review help?
3
0
Share
More Forum Discussions

What is the fuel tank capacity of the Panamera in liters?

The fuel tank capacity of the Panamera varies depending on its model, with different volumes for hybrid and gasoline versions. The current models come with fuel tank capacities of 75L and 90L. Relevant details are as follows: Exterior: The 2019 Porsche Panamera features smooth, flowing body lines without any sharp angles, showcasing Porsche's mature design style. It adopts a four-door layout, with large air intakes on both sides of the front fascia, intersected by horizontal strip-style fog lights, creating a unique appearance. The side profile is treated with clean and soft lines, blending elegance with dynamism. Interior: There is no difference among the various models. The center console boasts a high-quality glass-like finish, with multiple touch-sensitive areas integrated around the gear lever. The central part of the dashboard features a high-resolution 12-inch touchscreen display, with an analog tachometer positioned in the center of the instrument cluster, flanked by two high-resolution displays on either side.
19
2
Share

Does the Honda XR-V come with tire pressure monitoring?

Honda XR-V does not come with tire pressure monitoring as standard. Tire pressure monitoring is a system that automatically monitors the air pressure in the tires in real-time while driving and alerts the driver in case of leaks or low pressure to ensure driving safety. There are three commonly used types of tire pressure monitoring systems: Direct Tire Pressure Monitoring: Direct TPMS uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the differences in rotational speed between the tires, the system monitors the tire pressure. Indirect TPMS essentially relies on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS) Introduction: This system combines the advantages of both direct and indirect systems. It is equipped with direct sensors in two diagonally opposite tires and includes a four-wheel indirect system. Compared to a full direct system, this hybrid system reduces costs and overcomes the limitation of indirect systems, which cannot detect low pressure in multiple tires simultaneously. However, it still cannot provide real-time pressure data for all four tires like a direct system.
13
3
Share

What Causes the Car Navigation Screen to Flicker?

Here are the specific reasons for car navigation screen flickering: 1. Poor line contact: It is necessary to promptly check whether there is a loose connection in the circuit and properly reconnect the loose part. 2. Aging power signal line: If the signal line is aged, try replacing the power signal line. 3. Prolonged screen usage: This may cause failure in the power supply module. Have it checked or replaced at a 4S shop. 4. Defective circuit design: It needs to be inspected and repaired at a repair shop or directly replaced. If under warranty, go for warranty service; if not, have it checked and repaired at a 4S shop.
17
3
Share

Is the Ford Escort a three-cylinder engine?

Ford Escort is equipped with a three-cylinder, 1.5-liter naturally aspirated engine, delivering a maximum power of 90 kW and a maximum torque of 152 Nm. The engine reaches its peak power at 6,500 rpm and peak torque at 4,500 rpm. It is paired with either a 6-speed manual transmission or a 6-speed automatic transmission. The Ford Escort is a compact car with body dimensions of 4,586 mm in length, 1,820 mm in width, and 1,487 mm in height. In terms of suspension, the front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
7
3
Share

How to Remove the Rear Taillight of Baojun 510?

Baojun 510 rear taillight removal method: There are clips in the middle of the four sides. Gently push the clips outward or inward, first remove two diagonally opposite ones. When removing the third one, be sure to hold the lamp cover, then remove the fourth one to take off the rear taillight. The taillights of a car generally consist of the following types of lights: 1. Brake lights. Brake lights are divided into two categories: left and right brake lights (two) and high-mounted brake lights (one). The left and right brake lights are important components of the rear lights, distributed one on each side in the rear lights. They are red, as red has a warning meaning. The high-mounted brake light is generally installed at the upper part of the rear of the car, making it easier for vehicles behind to notice the braking of the vehicle in front, preventing rear-end collisions. 2. Reverse lights. The reverse light automatically turns on when the driver engages the reverse gear, mainly serving as a prompt and providing illumination at night. 3. Reflectors/strips. Inside the rear lights of the car, they serve a reflective function. When light from a vehicle behind shines on them, no matter the direction, it is reflected back along the original path, into the eyes of the driver behind, serving as a prompt. 4. Rear turn signals. Located in the rear lights, they flash to inform others that the car is turning.
15
3
Share

How much horsepower does a 1.5T engine have?

1.5T is equivalent to the displacement of a 2.0L naturally aspirated engine. The following is relevant information about engines: 1. Introduction: An engine is a machine that can convert non-mechanical energy into mechanical energy. 2. Classification: Includes internal combustion engines, external combustion engines, jet engines, electric motors, etc. External combustion engines convert the heat energy generated by combustion into kinetic energy, with Watt's improved steam engine being a typical example of an external combustion engine; Internal combustion engines, or reciprocating piston engines, differ most from external combustion engines in that the fuel burns inside them; Jet engines refer to engines that directly generate thrust by the high-speed airflow ejected from the nozzle.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.