How to turn off the rear wiper of the Lynk & Co 01?

What to Do If You Accidentally Scratch Someone Else's Car Door When Opening Yours?

Here are the solutions for accidentally scratching someone else's car door when opening yours: 1. Never flee the scene: As long as you don't run away, there's no need to fear the victim's threats. Pull over to the side of the road and turn on your hazard lights. 2. Call the traffic accident hotline immediately: The traffic police will be notified to handle the situation, and then you can report it to your insurance company. Regardless of who is at fault, always remember to call your insurance company. An insurance adjuster will come to verify both parties' information and assess the damage. The other party cannot bypass the insurance company's procedures. However, if the other party threatens to accuse you of leaving the scene, you can refer them to the insurance company. Insurance companies are better equipped to handle such matters and can resolve them quickly. 3. Do not tamper with the accident scene: Damaging the accident scene will make you liable. If the scene is altered, the police cannot properly collect evidence and will have to infer liability based on the direction of travel, collision trajectory, and impact area. There's no need to argue over which party is at fault.

9

4

Share

Will the insurance company reimburse for flood-damaged vehicles?

Insurance companies can reimburse for flood-damaged vehicles. Since being soaked by heavy rain meets the conditions of a natural disaster, basically all vehicle losses can be compensated through the auto damage insurance. If the vehicle is soaked in water, as long as the engine is not flooded and only parts replacement or circuit repairs are needed, these are covered under the auto damage insurance. Even if the entire vehicle is submerged by heavy rain, resulting in a total loss, the insurance company can compensate according to the total loss. Additional information: 1. Precautions: Flood-damaged vehicles may have sand and gravel that cannot be completely cleaned, remaining in gears or belts, which can cause certain parts to wear out easily and may initially produce unusual noises. Generally, repairing a flood-damaged vehicle involves removing the seats, interior components, and panels, draining the accumulated water, cleaning the mud, and dismantling the engine to check electronic components, especially whether the computer motherboard is damaged. 2. Hazards of flood-damaged vehicles: The hazards of water-damaged vehicles are significant. If a vehicle is submerged in water, it can easily lead to rusting of body parts, shortening the vehicle's lifespan and reducing safety performance. For example, water damage can cause corrosion and rusting of the vehicle's wiring, leading to short circuits while driving, which may result in sudden stalling or even spontaneous combustion, with unimaginable consequences. Additionally, the repair costs for water-damaged vehicles are very high, often exceeding 50% of the vehicle's value for severely damaged vehicles, and insurance claims can be very problematic.

8

0

Share

Can You Pass the Driving Test Without Using Fifth Gear?

It is possible to pass the driving test without using fifth gear, as shifting into fifth gear can be quite challenging for beginners. Below are the relevant details about the road test (Subject 3): 1. Gear Requirements: After starting, shift up one gear with each press of the accelerator. First gear should not exceed 2000 RPM. Second gear should not exceed 2500 RPM. Third gear should maintain a speed between 20 km/h and 40 km/h. Fourth gear should maintain a speed between 30 km/h and 50 km/h. (Note: Subject 3 allows speeds above 40 km/h only in fifth gear, so fourth gear should be between 30 km/h and 40 km/h.) 2. Test Content: (1) Starting the vehicle (First, adjust the seat and rearview mirror, check if the brakes and accelerator are functioning properly, and ensure the surroundings are safe before starting); (2) Left and right turns and U-turns (Do not move the steering wheel within three seconds of activating the turn signal, and ensure the speed matches the gear); (3) Passing bus stops, pedestrian crossings, and school zones (Speed must not exceed 30 km/h, and check for pedestrians by looking left and right); (4) Gear shifting operations (Complete gear shifting within the specified time and distance); (5) Lane changes and overtaking (Do not move the steering wheel within three seconds of activating the turn signal, and complete the maneuver within the specified time and distance); (6) Straight-line driving (Speed must not fall below 40 km/h, and steering wheel adjustments must not exceed three degrees; complete the straight-line driving within the specified distance); (7) Traffic light compliance (Stop and wait at red lights; if stopping midway, always restart in first gear); (8) Pulling over (Choose an appropriate spot to pull over within the specified distance).

11

5

Share

Brief Description of the Micrometer Reading Method

To read a micrometer, first read the whole millimeters and half millimeters of the workpiece from the fixed sleeve. Then, read the decimal part of the measurement from the thimble scale where the longitudinal line of the fixed sleeve aligns. The sum of these two readings gives the size of the workpiece. Below is a detailed introduction to micrometers. Brief Meaning: A micrometer, also known as a screw gauge, screw micrometer, or micrometer caliper, is a more precise length measuring tool than a vernier caliper. It can measure lengths accurately up to 0.01mm, with a measurement range of several centimeters. Classification: Micrometers can be categorized into mechanical micrometers, electronic micrometers, vernier reading outside micrometers, small-head outside micrometers, pointed outside micrometers, wall thickness micrometers, sheet thickness micrometers, and micrometers with a micro head to be measured, among others.

19

3

Share

Basic Structure and Principles of Automobiles

Automobiles utilize the ECU to inject fuel, while the ignition coil generates high-voltage electricity to supply the spark plug. The mixture of gasoline and air pushes the spark plug, which ignites, causing an explosion that generates power. This power is transmitted via the belt, driving the wheels to rotate. Below is a basic introduction to automobiles: Basic Structure: Automobiles are typically composed of four main parts: the engine, chassis, body, and electrical equipment. Engine Function: The engine's role is to burn the fuel supplied to it and generate power. Most automobiles use a reciprocating piston internal combustion engine, which generally consists of the engine block, crankshaft-connecting rod mechanism, valve train, fuel supply system, cooling system, lubrication system, ignition system (used in gasoline engines), and starting system. The chassis receives the engine's power, enabling the automobile to move and ensuring it operates normally according to the driver's control.

3

4

Share

What is the wading depth of the Q5?

The maximum wading depth of the Audi Q5 is 500mm. The wading depth of the Audi Q5 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Audi Q5 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. Alternatively, installing a snorkel can increase the height of the engine's air intake, thereby improving the maximum wading depth. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. For roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate the water depth before deciding whether to proceed. Understand your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, avoid entering the water and choose an alternative route.

17

2

Share

How to turn off the rear wiper of the Lynk & Co 01?

What to Do If You Accidentally Scratch Someone Else's Car Door When Opening Yours?

Will the insurance company reimburse for flood-damaged vehicles?

Can You Pass the Driving Test Without Using Fifth Gear?

Brief Description of the Micrometer Reading Method

Basic Structure and Principles of Automobiles

What is the wading depth of the Q5?

What do L, H, and M represent as gear positions?

Precautions for Driving on Highways at Night

How many years can the driver's license test be retained?

Can I Schedule the Driving Test If the Required Kilometers for Subject 3 Are Not Met?